3GPP TDocs (written contributions) at meeting
Meeting: R4-35 - 2005-05-09 to 2005-05-13, Athens
meeting id: R4-35 (click id for more info on this meeting)Click on the Tdoc to open its file.
TDoc | Title | Source | Remarks |
---|---|---|---|
R4‑050288 | - | - | - |
R4‑050289 | - | - | - |
R4‑050290 | - | - | - |
R4‑050291 | - | - | - |
R4‑050292 | - | - | - |
R4‑050293 | - | - | - |
R4‑050294 | - | - | - |
R4‑050295 | - | - | - |
R4‑050296 | - | - | - |
R4‑050297 | - | - | - |
R4‑050298 | - | - | - |
R4‑050299 | - | - | - |
R4‑050300 | - | - | - |
R4‑050301 | - | - | - |
R4‑050302 | - | - | - |
R4‑050303 | - | - | - |
R4‑050304 | Introduction of UMTS 2.6 GHz requirements in 25.113 | - | - |
R4‑050305 | Introduction of UMTS 2.6 GHz requirements in 25.141 | - | - |
R4‑050306 | Correction of spectrum mask requirements for Bands I and III | - | - |
R4‑050307 | - | - | - |
R4‑050308 | - | - | - |
R4‑050309 | - | - | - |
R4‑050310 | - | - | - |
R4‑050311 | - | - | - |
R4‑050312 | LS to RAN3: Summary of Chapters in TS 25.461 to be put under RAN4 mandate | R4 | - |
R4‑050313 | - | - | - |
R4‑050314 | - | - | - |
R4‑050315 | - | - | - |
R4‑050316 | - | - | - |
R4‑050317 | - | - | - |
R4‑050319 | - | - | - |
R4‑050320 | - | - | - |
R4‑050321 | - | - | - |
R4‑050322 | - | - | - |
R4‑050323 | - | - | - |
R4‑050326 | Removing of event triggered reporting testcase in fading A.8.1.4 | - | - |
R4‑050327 | - | - | - |
R4‑050328 | - | - | - |
R4‑050329 | - | - | - |
R4‑050330 | New requirements Fast L1 Sync | - | - |
R4‑050331 | New requirements Timing-maintained hard handover | - | - |
R4‑050332 | - | - | - |
R4‑050333 | - | - | - |
R4‑050334 | UE maximum output power with HS-DPCCH & EDCH | - | - |
R4‑050335 | E-TFC selection in the UE | - | - |
R4‑050336 | - | - | - |
R4‑050337 | Maximum size of active set for HSUPA | - | - |
R4‑050338 | - | - | - |
R4‑050339 | - | - | - |
R4‑050340 | - | - | - |
R4‑050341 | - | - | - |
R4‑050342 | - | - | - |
R4‑050343 | - | - | - |
R4‑050344 | - | - | - |
R4‑050345 | - | - | - |
R4‑050346 | - | - | - |
R4‑050347 | - | - | - |
R4‑050348 | - | - | - |
R4‑050349 | - | - | - |
R4‑050350 | - | - | - |
R4‑050351 | - | - | - |
R4‑050352 | - | - | - |
R4‑050353 | - | - | - |
R4‑050354 | - | - | - |
R4‑050355 | - | - | - |
R4‑050356 | Introduction of UMTS 2.6 GHz requirements | - | - |
R4‑050357 | - | - | - |
R4‑050358 | - | - | - |
R4‑050359 | Introduction of UMTS 2.6 GHz requirements | - | - |
R4‑050360 | Correction of spurious emissions requirement | - | - |
R4‑050361 | - | - | - |
R4‑050362 | - | - | - |
R4‑050363 | Introduction of Fractional DPCH | - | - |
R4‑050364 | Definition of the Reference Cell in case of initial Macro Diversity allocation | - | - |
R4‑050365 | - | - | - |
R4‑050366 | - | - | - |
R4‑050367 | - | - | - |
R4‑050368 | - | - | - |
R4‑050369 | - | - | - |
R4‑050370 | Alignment of Requirements for Inter Frequency Cell Identification Test Case | - | - |
R4‑050371 | - | - | - |
R4‑050372 | - | - | - |
R4‑050373 | - | - | - |
R4‑050374 | Introduction of UMTS2600 requirements | - | - |
R4‑050375 | Introduction of UMTS2600 requirements | - | - |
R4‑050376 | - | - | - |
R4‑050377 | Correction of receiver exclusion bands | - | - |
R4‑050378 | Correction of CPICH RSCP absolute accuracy condition | - | - |
R4‑050379 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050380 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050381 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050382 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050383 | Feature Clean Up: Removal of SSDT | - | - |
R4‑050384 | Feature Clean Up: Removal of SSDT | - | - |
R4‑050385 | Feature Clean Up: Removal of SSDT | - | - |
R4‑050386 | Feature Clean Up: Removal of SSDT | - | - |
R4‑050387 | Test configuration for BS with integrated Iuant BS Modem | - | - |
R4‑050388 | - | - | - |
R4‑050389 | - | - | - |
R4‑050390 | - | - | - |
R4‑050392 | - | - | - |
R4‑050393 | - | - | - |
R4‑050394 | Removal of UTRA carrier RSSI relative accuracy testcase | - | - |
R4‑050395 | Removal of UTRA carrier RSSI relative accuracy testcase | - | - |
R4‑050396 | Removal of UTRA carrier RSSI relative accuracy testcase | - | - |
R4‑050397 | Modification of UTRA carrier RSSI relative accuracy testcase to use 3 cells and carrier frequencies | - | - |
R4‑050398 | - | - | - |
R4‑050399 | Feature Clean Up: Removal of dedicated pilot as sole phase reference | - | - |
R4‑050400 | Feature Clean Up: Removal of dedicated pilot as sole phase reference | - | - |
R4‑050401 | Feature Clean Up: Removal of SSDT | - | - |
R4‑050402 | Feature Clean Up: Removal of SSDT | - | - |
R4‑050403 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050404 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050405 | Feature Clean Up: Removal of Tx diversity closed loop mode2 | - | - |
R4‑050406 | Feature Clean Up: Removal of Tx diversity closed loop mode2 | - | - |
R4‑050407 | Feature Clean Up: Removal of Compressed mode by puncturing | - | - |
R4‑050408 | Feature Clean Up: Removal of Compressed mode by puncturing | - | - |
R4‑050409 | Feature Clean Up: Removal of Observed time difference to GSM cell | - | - |
R4‑050410 | Feature Clean Up: Removal of Observed time difference to GSM cell | - | - |
R4‑050411 | Feature Clean Up: Removal of Compressed mode by puncturing | - | - |
R4‑050412 | Feature Clean Up: Removal of Compressed mode by puncturing | - | - |
R4‑050413 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050414 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050415 | Feature Clean Up: Removal of dedicated pilot as sole phase reference | - | - |
R4‑050416 | Feature Clean Up: Removal of dedicated pilot as sole phase reference | - | - |
R4‑050417 | - | - | - |
R4‑050418 | - | - | - |
R4‑050419 | - | - | - |
R4‑050420 | LS on RAN4 MBMS simulation results for SA4 | R4 | - |
R4‑050421 | - | - | - |
R4‑050422 | - | - | - |
R4‑050423 | - | - | - |
R4‑050424 | - | - | - |
R4‑050425 | Correction of error in the implementation of CR 368 (in R4-040779) to 25.101 | - | - |
R4‑050426 | PRACH Burst timing Accuracy | - | - |
R4‑050427 | - | - | - |
R4‑050428 | - | - | - |
R4‑050429 | - | - | - |
R4‑050430 | - | - | - |
R4‑050431 | - | - | - |
R4‑050432 | UE transmitted power measurement report mapping. | - | - |
R4‑050433 | UE transmitted power measurement report mapping. | - | - |
R4‑050434 | Correction to DCH demodulation requirements | - | - |
R4‑050435 | - | - | - |
R4‑050436 | Further clarification to HS-DPCCH time mask requirements | - | - |
R4‑050437 | Further clarification to HS-DPCCH time mask requirements | - | - |
R4‑050438 | - | - | - |
R4‑050439 | - | - | - |
R4‑050440 | - | - | - |
R4‑050441 | - | - | - |
R4‑050442 | - | - | - |
R4‑050443 | - | - | - |
R4‑050445 | - | - | - |
R4‑050446 | - | - | - |
R4‑050448 | - | - | - |
R4‑050449 | - | - | - |
R4‑050450 | - | - | - |
R4‑050451 | - | - | - |
R4‑050452 | - | - | - |
R4‑050453 | - | - | - |
R4‑050454 | - | - | - |
R4‑050455 | - | - | - |
R4‑050456 | - | - | - |
R4‑050457 | - | - | - |
R4‑050458 | - | - | - |
R4‑050459 | - | - | - |
R4‑050460 | - | - | - |
R4‑050461 | - | - | - |
R4‑050462 | - | - | - |
R4‑050463 | Correction of parameters for HSDPA fixed reference channel test | - | - |
R4‑050464 | Correction of parameters for HSDPA fixed reference channel test | - | - |
R4‑050465 | Correction of parameters for TDD 1.28 Mcps HSDPA fixed and variable reference channel tests | - | - |
R4‑050466 | Correction of parameters for TDD 1.28 Mcps HSDPA fixed and variable reference channel tests | - | - |
R4‑050467 | - | - | - |
R4‑050468 | - | - | - |
R4‑050469 | - | - | - |
R4‑050470 | - | - | - |
R4‑050471 | - | - | - |
R4‑050472 | - | - | - |
R4‑050473 | - | - | - |
R4‑050474 | - | - | - |
R4‑050475 | - | - | - |
R4‑050476 | Clarification to HS-DPCCH time mask requirements | - | - |
R4‑050477 | Clarification to HS-DPCCH time mask requirements | - | - |
R4‑050478 | - | - | - |
R4‑050479 | Clarification of modulation accuracy requirements for HS-DPCCH | - | - |
R4‑050480 | Clarification of modulation accuracy requirements for HS-DPCCH | - | - |
R4‑050481 | - | - | - |
R4‑050482 | Addition of code power stability requirements for multi-code transmission | - | - |
R4‑050483 | PRACH burst timing | - | - |
R4‑050484 | - | - | - |
R4‑050485 | - | - | - |
R4‑050486 | - | - | - |
R4‑050487 | - | - | - |
R4‑050488 | - | - | - |
R4‑050489 | - | - | - |
R4‑050490 | Clarification of Test requirements on FDD/FDD Soft Handover test | - | - |
R4‑050491 | - | - | - |
R4‑050492 | - | - | - |
R4‑050493 | - | - | - |
R4‑050494 | - | - | - |
R4‑050495 | - | - | - |
R4‑050496 | - | - | - |
R4‑050497 | - | - | - |
R4‑050498 | - | - | - |
R4‑050499 | - | - | - |
R4‑050500 | - | - | - |
R4‑050501 | - | - | - |
R4‑050502 | - | - | - |
R4‑050503 | - | - | - |
R4‑050504 | - | - | - |
R4‑050505 | - | - | - |
R4‑050506 | - | - | - |
R4‑050507 | - | - | - |
R4‑050508 | - | - | - |
R4‑050509 | - | - | - |
R4‑050510 | - | - | - |
R4‑050511 | - | - | - |
R4‑050512 | - | - | - |
R4‑050513 | - | - | - |
R4‑050514 | - | - | - |
R4‑050515 | - | - | - |
R4‑050516 | Correction for the description of HS-DPCCH requirements | - | - |
R4‑050517 | - | - | - |
R4‑050518 | - | - | - |
R4‑050519 | - | - | - |
R4‑050520 | - | - | - |
R4‑050521 | - | - | - |
R4‑050523 | - | - | - |
R4‑050524 | - | - | - |
R4‑050525 | - | - | - |
R4‑050526 | - | - | - |
R4‑050527 | Response LS to UE transmit timing (34.121 Clause 8.5.1, 25.133 Clause 7.1 and A.7.1) | R4 | - |
R4‑050528 | - | - | - |
R4‑050529 | - | - | - |
R4‑050530 | - | - | - |
R4‑050532 | Feature Clean Up: Removal of CPCH | - | - |
R4‑050534 | UE transmitted power measurement report mapping. | - | - |
R4‑050535 | UE transmitted power measurement report mapping. | - | - |
R4‑050536 | - | - | - |
R4‑050537 | - | - | - |
R4‑050538 | Specification of enhanced performance requirements type 2 | - | - |
R4‑050539 | - | - | - |
R4‑050540 | - | - | - |
R4‑050541 | - | - | - |
R4‑050542 | - | - | - |
R4‑050543 | Test configuration for BS with integrated Iuant BS Modem | - | - |
R4‑050544 | E-TFC selection in the UE | - | - |
R4‑050545 | UE maximum output power with HS-DPCCH & EDCH | - | - |
R4‑050546 | - | - | - |
R4‑050547 | - | - | - |
R4‑050548 | - | - | - |
R4‑050549 | - | - | - |
R4‑050551 | Clarification to HS-DPCCH time mask requirements | - | - |
R4‑050552 | Clarification to HS-DPCCH time mask requirements | - | - |
R4‑050553 | - | - | - |
R4‑050554 | LS Typical Limiting interference parameters for terrestrial UMTS systems | R4 | - |
R4‑050555 | Introduction of UMTS 2.6 GHz requirements | - | - |
R4‑050556 | LS on RAN4 progress in UMTS 2.6GHz WI (FDD INT) | R4 | - |
R4‑050557 | Introduction of UMTS2600 requirements | - | - |
R4‑050558 | - | - | - |
R4‑050559 | Introduction of UMTS 2.6 GHz requirements | - | - |
R4‑050560 | Introduction of UMTS 2.6 GHz adjacent band services | - | - |
R4‑050561 | - | - | - |
R4‑050562 | Introduction of UMTS 2.6 GHz blocking requirements | - | - |
R4‑050563 | - | - | - |
R4‑050564 | - | - | - |
R4‑050565 | - | - | - |
R4‑050566 | - | - | - |
R4‑050567 | - | - | - |
R4‑050568 | - | - | - |
R4‑050569 | - | - | - |
R4‑050570 | - | - | - |
R4‑050571 | Modification of UTRA carrier RSSI relative accuracy testcase to use 3 cells and carrier frequencies | - | - |
R4‑050572 | - | - | - |
R4‑050573 | Correction of CPICH_RSCP Intra frequency absolute measurement accuracy side conditions for Band III | - | - |
R4‑050574 | - | - | - |
R4‑050575 | - | - | - |
R4‑050576 | Response LS to RAN5 regarding Worksplit on RRM test cases between RAN4 and RAN5 | R4 | - |
R4‑050577 | - | - | - |
R4‑050578 | - | - | - |
R4‑050579 | New requirements Fast L1 Sync | - | - |
R4‑050580 | New requirements Timing-maintained hard handover | - | - |
R4‑050581 | - | - | - |
R4‑050582 | Clarification of Test requirements on FDD/FDD Soft Handover test | - | - |
R4‑050585 | - | - | - |
R4‑050586 | PRACH Burst timing Accuracy | - | - |
R4‑050587 | Reply LS on loopback for HSDPA | R4 | - |
R4‑050588 | - | - | - |
R4‑050589 | Reply LS to RAN2 on Management of Power Limitation for EUL | R4 | - |
R4‑050590 | - | - | - |
R4‑050591 | - | - | - |
R4‑050592 | - | - | - |
R4‑050593 | Introduction of UMTS 2.6 GHz requirements in 25.141 | - | - |
R4‑050594 | Introduction of UMTS 2.6 GHz blocking requirements | - | - |
R4‑050595 | Introduction of UMTS 2.6 GHz adjacent band services | - | - |
R4‑050596 | - | - | - |
R4‑050597 | - | - | - |
R4‑050598 | - | - | - |
R4‑050599 | Addition of DL power control response time | - | - |
R4‑050600 | Response to LS on accuracy of TFC selection at RACH access for FDD | R4 | - |
R4‑050601 | UE transmitted power measurement report mapping. | - | - |
R4‑050602 | UE transmitted power measurement report mapping. | - | - |
R4‑050603 | UE maximum output power with HS-DPCCH & EDCH | - | - |
R4‑050604 | New requirements Timing-maintained hard handover | - | - |
R4‑050605 | Response LS to RAN WG5 on the SS behavior in Downlink Power Control Test cases | R4 | - |
R4‑050606 | Reply LS on Introduction of Fractional DPCH | R4 | - |
R4‑050607 | UE transmitted power measurement report mapping. | - | - |
page generated from database: 2024-07-20 12:15:34