The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R4-35 - 2005-05-09 to 2005-05-13, Athens

meeting id: R4-35 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R4‑050288 - - -
R4‑050289 - - -
R4‑050290 - - -
R4‑050291 - - -
R4‑050292 - - -
R4‑050293 - - -
R4‑050294 - - -
R4‑050295 - - -
R4‑050296 - - -
R4‑050297 - - -
R4‑050298 - - -
R4‑050299 - - -
R4‑050300 - - -
R4‑050301 - - -
R4‑050302 - - -
R4‑050303 - - -
R4‑050304 Introduction of UMTS 2.6 GHz requirements in 25.113 - -
R4‑050305 Introduction of UMTS 2.6 GHz requirements in 25.141 - -
R4‑050306 Correction of spectrum mask requirements for Bands I and III - -
R4‑050307 - - -
R4‑050308 - - -
R4‑050309 - - -
R4‑050310 - - -
R4‑050311 - - -
R4‑050312 LS to RAN3: Summary of Chapters in TS 25.461 to be put under RAN4 mandate R4 -
R4‑050313 - - -
R4‑050314 - - -
R4‑050315 - - -
R4‑050316 - - -
R4‑050317 - - -
R4‑050319 - - -
R4‑050320 - - -
R4‑050321 - - -
R4‑050322 - - -
R4‑050323 - - -
R4‑050326 Removing of event triggered reporting testcase in fading A.8.1.4 - -
R4‑050327 - - -
R4‑050328 - - -
R4‑050329 - - -
R4‑050330 New requirements Fast L1 Sync - -
R4‑050331 New requirements Timing-maintained hard handover - -
R4‑050332 - - -
R4‑050333 - - -
R4‑050334 UE maximum output power with HS-DPCCH & EDCH - -
R4‑050335 E-TFC selection in the UE - -
R4‑050336 - - -
R4‑050337 Maximum size of active set for HSUPA - -
R4‑050338 - - -
R4‑050339 - - -
R4‑050340 - - -
R4‑050341 - - -
R4‑050342 - - -
R4‑050343 - - -
R4‑050344 - - -
R4‑050345 - - -
R4‑050346 - - -
R4‑050347 - - -
R4‑050348 - - -
R4‑050349 - - -
R4‑050350 - - -
R4‑050351 - - -
R4‑050352 - - -
R4‑050353 - - -
R4‑050354 - - -
R4‑050355 - - -
R4‑050356 Introduction of UMTS 2.6 GHz requirements - -
R4‑050357 - - -
R4‑050358 - - -
R4‑050359 Introduction of UMTS 2.6 GHz requirements - -
R4‑050360 Correction of spurious emissions requirement - -
R4‑050361 - - -
R4‑050362 - - -
R4‑050363 Introduction of Fractional DPCH - -
R4‑050364 Definition of the Reference Cell in case of initial Macro Diversity allocation - -
R4‑050365 - - -
R4‑050366 - - -
R4‑050367 - - -
R4‑050368 - - -
R4‑050369 - - -
R4‑050370 Alignment of Requirements for Inter Frequency Cell Identification Test Case - -
R4‑050371 - - -
R4‑050372 - - -
R4‑050373 - - -
R4‑050374 Introduction of UMTS2600 requirements - -
R4‑050375 Introduction of UMTS2600 requirements - -
R4‑050376 - - -
R4‑050377 Correction of receiver exclusion bands - -
R4‑050378 Correction of CPICH RSCP absolute accuracy condition - -
R4‑050379 Feature Clean Up: Removal of CPCH - -
R4‑050380 Feature Clean Up: Removal of CPCH - -
R4‑050381 Feature Clean Up: Removal of CPCH - -
R4‑050382 Feature Clean Up: Removal of CPCH - -
R4‑050383 Feature Clean Up: Removal of SSDT - -
R4‑050384 Feature Clean Up: Removal of SSDT - -
R4‑050385 Feature Clean Up: Removal of SSDT - -
R4‑050386 Feature Clean Up: Removal of SSDT - -
R4‑050387 Test configuration for BS with integrated Iuant BS Modem - -
R4‑050388 - - -
R4‑050389 - - -
R4‑050390 - - -
R4‑050392 - - -
R4‑050393 - - -
R4‑050394 Removal of UTRA carrier RSSI relative accuracy testcase - -
R4‑050395 Removal of UTRA carrier RSSI relative accuracy testcase - -
R4‑050396 Removal of UTRA carrier RSSI relative accuracy testcase - -
R4‑050397 Modification of UTRA carrier RSSI relative accuracy testcase to use 3 cells and carrier frequencies - -
R4‑050398 - - -
R4‑050399 Feature Clean Up: Removal of dedicated pilot as sole phase reference - -
R4‑050400 Feature Clean Up: Removal of dedicated pilot as sole phase reference - -
R4‑050401 Feature Clean Up: Removal of SSDT - -
R4‑050402 Feature Clean Up: Removal of SSDT - -
R4‑050403 Feature Clean Up: Removal of CPCH - -
R4‑050404 Feature Clean Up: Removal of CPCH - -
R4‑050405 Feature Clean Up: Removal of Tx diversity closed loop mode2 - -
R4‑050406 Feature Clean Up: Removal of Tx diversity closed loop mode2 - -
R4‑050407 Feature Clean Up: Removal of Compressed mode by puncturing - -
R4‑050408 Feature Clean Up: Removal of Compressed mode by puncturing - -
R4‑050409 Feature Clean Up: Removal of Observed time difference to GSM cell - -
R4‑050410 Feature Clean Up: Removal of Observed time difference to GSM cell - -
R4‑050411 Feature Clean Up: Removal of Compressed mode by puncturing - -
R4‑050412 Feature Clean Up: Removal of Compressed mode by puncturing - -
R4‑050413 Feature Clean Up: Removal of CPCH - -
R4‑050414 Feature Clean Up: Removal of CPCH - -
R4‑050415 Feature Clean Up: Removal of dedicated pilot as sole phase reference - -
R4‑050416 Feature Clean Up: Removal of dedicated pilot as sole phase reference - -
R4‑050417 - - -
R4‑050418 - - -
R4‑050419 - - -
R4‑050420 LS on RAN4 MBMS simulation results for SA4 R4 -
R4‑050421 - - -
R4‑050422 - - -
R4‑050423 - - -
R4‑050424 - - -
R4‑050425 Correction of error in the implementation of CR 368 (in R4-040779) to 25.101 - -
R4‑050426 PRACH Burst timing Accuracy - -
R4‑050427 - - -
R4‑050428 - - -
R4‑050429 - - -
R4‑050430 - - -
R4‑050431 - - -
R4‑050432 UE transmitted power measurement report mapping. - -
R4‑050433 UE transmitted power measurement report mapping. - -
R4‑050434 Correction to DCH demodulation requirements - -
R4‑050435 - - -
R4‑050436 Further clarification to HS-DPCCH time mask requirements - -
R4‑050437 Further clarification to HS-DPCCH time mask requirements - -
R4‑050438 - - -
R4‑050439 - - -
R4‑050440 - - -
R4‑050441 - - -
R4‑050442 - - -
R4‑050443 - - -
R4‑050445 - - -
R4‑050446 - - -
R4‑050448 - - -
R4‑050449 - - -
R4‑050450 - - -
R4‑050451 - - -
R4‑050452 - - -
R4‑050453 - - -
R4‑050454 - - -
R4‑050455 - - -
R4‑050456 - - -
R4‑050457 - - -
R4‑050458 - - -
R4‑050459 - - -
R4‑050460 - - -
R4‑050461 - - -
R4‑050462 - - -
R4‑050463 Correction of parameters for HSDPA fixed reference channel test - -
R4‑050464 Correction of parameters for HSDPA fixed reference channel test - -
R4‑050465 Correction of parameters for TDD 1.28 Mcps HSDPA fixed and variable reference channel tests - -
R4‑050466 Correction of parameters for TDD 1.28 Mcps HSDPA fixed and variable reference channel tests - -
R4‑050467 - - -
R4‑050468 - - -
R4‑050469 - - -
R4‑050470 - - -
R4‑050471 - - -
R4‑050472 - - -
R4‑050473 - - -
R4‑050474 - - -
R4‑050475 - - -
R4‑050476 Clarification to HS-DPCCH time mask requirements - -
R4‑050477 Clarification to HS-DPCCH time mask requirements - -
R4‑050478 - - -
R4‑050479 Clarification of modulation accuracy requirements for HS-DPCCH - -
R4‑050480 Clarification of modulation accuracy requirements for HS-DPCCH - -
R4‑050481 - - -
R4‑050482 Addition of code power stability requirements for multi-code transmission - -
R4‑050483 PRACH burst timing - -
R4‑050484 - - -
R4‑050485 - - -
R4‑050486 - - -
R4‑050487 - - -
R4‑050488 - - -
R4‑050489 - - -
R4‑050490 Clarification of Test requirements on FDD/FDD Soft Handover test - -
R4‑050491 - - -
R4‑050492 - - -
R4‑050493 - - -
R4‑050494 - - -
R4‑050495 - - -
R4‑050496 - - -
R4‑050497 - - -
R4‑050498 - - -
R4‑050499 - - -
R4‑050500 - - -
R4‑050501 - - -
R4‑050502 - - -
R4‑050503 - - -
R4‑050504 - - -
R4‑050505 - - -
R4‑050506 - - -
R4‑050507 - - -
R4‑050508 - - -
R4‑050509 - - -
R4‑050510 - - -
R4‑050511 - - -
R4‑050512 - - -
R4‑050513 - - -
R4‑050514 - - -
R4‑050515 - - -
R4‑050516 Correction for the description of HS-DPCCH requirements - -
R4‑050517 - - -
R4‑050518 - - -
R4‑050519 - - -
R4‑050520 - - -
R4‑050521 - - -
R4‑050523 - - -
R4‑050524 - - -
R4‑050525 - - -
R4‑050526 - - -
R4‑050527 Response LS to UE transmit timing (34.121 Clause 8.5.1, 25.133 Clause 7.1 and A.7.1) R4 -
R4‑050528 - - -
R4‑050529 - - -
R4‑050530 - - -
R4‑050532 Feature Clean Up: Removal of CPCH - -
R4‑050534 UE transmitted power measurement report mapping. - -
R4‑050535 UE transmitted power measurement report mapping. - -
R4‑050536 - - -
R4‑050537 - - -
R4‑050538 Specification of enhanced performance requirements type 2 - -
R4‑050539 - - -
R4‑050540 - - -
R4‑050541 - - -
R4‑050542 - - -
R4‑050543 Test configuration for BS with integrated Iuant BS Modem - -
R4‑050544 E-TFC selection in the UE - -
R4‑050545 UE maximum output power with HS-DPCCH & EDCH - -
R4‑050546 - - -
R4‑050547 - - -
R4‑050548 - - -
R4‑050549 - - -
R4‑050551 Clarification to HS-DPCCH time mask requirements - -
R4‑050552 Clarification to HS-DPCCH time mask requirements - -
R4‑050553 - - -
R4‑050554 LS Typical Limiting interference parameters for terrestrial UMTS systems R4 -
R4‑050555 Introduction of UMTS 2.6 GHz requirements - -
R4‑050556 LS on RAN4 progress in UMTS 2.6GHz WI (FDD INT) R4 -
R4‑050557 Introduction of UMTS2600 requirements - -
R4‑050558 - - -
R4‑050559 Introduction of UMTS 2.6 GHz requirements - -
R4‑050560 Introduction of UMTS 2.6 GHz adjacent band services - -
R4‑050561 - - -
R4‑050562 Introduction of UMTS 2.6 GHz blocking requirements - -
R4‑050563 - - -
R4‑050564 - - -
R4‑050565 - - -
R4‑050566 - - -
R4‑050567 - - -
R4‑050568 - - -
R4‑050569 - - -
R4‑050570 - - -
R4‑050571 Modification of UTRA carrier RSSI relative accuracy testcase to use 3 cells and carrier frequencies - -
R4‑050572 - - -
R4‑050573 Correction of CPICH_RSCP Intra frequency absolute measurement accuracy side conditions for Band III - -
R4‑050574 - - -
R4‑050575 - - -
R4‑050576 Response LS to RAN5 regarding Worksplit on RRM test cases between RAN4 and RAN5 R4 -
R4‑050577 - - -
R4‑050578 - - -
R4‑050579 New requirements Fast L1 Sync - -
R4‑050580 New requirements Timing-maintained hard handover - -
R4‑050581 - - -
R4‑050582 Clarification of Test requirements on FDD/FDD Soft Handover test - -
R4‑050585 - - -
R4‑050586 PRACH Burst timing Accuracy - -
R4‑050587 Reply LS on loopback for HSDPA R4 -
R4‑050588 - - -
R4‑050589 Reply LS to RAN2 on Management of Power Limitation for EUL R4 -
R4‑050590 - - -
R4‑050591 - - -
R4‑050592 - - -
R4‑050593 Introduction of UMTS 2.6 GHz requirements in 25.141 - -
R4‑050594 Introduction of UMTS 2.6 GHz blocking requirements - -
R4‑050595 Introduction of UMTS 2.6 GHz adjacent band services - -
R4‑050596 - - -
R4‑050597 - - -
R4‑050598 - - -
R4‑050599 Addition of DL power control response time - -
R4‑050600 Response to LS on accuracy of TFC selection at RACH access for FDD R4 -
R4‑050601 UE transmitted power measurement report mapping. - -
R4‑050602 UE transmitted power measurement report mapping. - -
R4‑050603 UE maximum output power with HS-DPCCH & EDCH - -
R4‑050604 New requirements Timing-maintained hard handover - -
R4‑050605 Response LS to RAN WG5 on the SS behavior in Downlink Power Control Test cases R4 -
R4‑050606 Reply LS on Introduction of Fractional DPCH R4 -
R4‑050607 UE transmitted power measurement report mapping. - -

page generated from database: 2019-08-20 08:43:13