The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R3-11 - 2000-02-28 to 2000-03-03, Sophia Antipolis

meeting id: R3-11 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R3_IndexI - - -
R3‑000407 - - -
R3‑000408 - - -
R3‑000409 - - -
R3‑000410 - - -
R3‑000411 - - -
R3‑000412 - - -
R3‑000413 - - -
R3‑000414 - - -
R3‑000415 - - -
R3‑000416 - - -
R3‑000417 Removal of ATM Protection Switching - -
R3‑000418 Removal of ATM Protection Switching - -
R3‑000419 - - -
R3‑000420 - - -
R3‑000432 - - -
R3‑000441 - - -
R3‑000442 - - -
R3‑000443 - - -
R3‑000444 - - -
R3‑000445 - - -
R3‑000446 - - -
R3‑000447 - - -
R3‑000448 - - -
R3‑000449 - - -
R3‑000450 - - -
R3‑000451 - - -
R3‑000453 - - -
R3‑000454 - - -
R3‑000455 - - -
R3‑000456 - - -
R3‑000457 - - -
R3‑000458 - - -
R3‑000459 - - -
R3‑000460 - - -
R3‑000461 - - -
R3‑000462 - - -
R3‑000463 - - -
R3‑000464 - - -
R3‑000465 - - -
R3‑000466 Clarification on the ''BLER'' parameter - -
R3‑000467 - - -
R3‑000468 - - -
R3‑000469 Removal of open issues chapter - -
R3‑000470 Removal of open issues chapter - -
R3‑000471 Primary CPICH Power - -
R3‑000472 Primary CPICH Power - -
R3‑000473 - - -
R3‑000474 - - -
R3‑000475 - - -
R3‑000476 Change of definition of QE - -
R3‑000477 - - -
R3‑000478 - - -
R3‑000479 - - -
R3‑000480 - - -
R3‑000481 - - -
R3‑000482 - - -
R3‑000483 Clarification of UL/DL signalling transfer proc. and Uu interface - -
R3‑000484 - - -
R3‑000485 - - -
R3‑000486 - - -
R3‑000487 Clarification on measurement characteristics - -
R3‑000488 Clarification on measurement characteristics - -
R3‑000489 - - -
R3‑000490 - - -
R3‑000491 - - -
R3‑000492 Alignment to R3 definition of puncturing limit range and step size - -
R3‑000493 Alignment to R3 definition of puncturing limit range and step size - -
R3‑000494 Update of system information procedure - -
R3‑000495 Pre-amble threshold for PRACH - -
R3‑000496 - - -
R3‑000497 - - -
R3‑000498 - - -
R3‑000499 - - -
R3‑000500 - - -
R3‑000501 - - -
R3‑000502 Clarification of the Blocking and Unblocking procedures - -
R3‑000503 - - -
R3‑000504 Addition of UE-ID Indicator IE in Iur FACH FP - -
R3‑000505 Data stream definitions - -
R3‑000506 - - -
R3‑000507 - - -
R3‑000508 - - -
R3‑000509 - - -
R3‑000510 Enhancement of the description of the message type IE - -
R3‑000511 Enhancement of the description of the message type IE - -
R3‑000512 Enhancement of the description of the message type IE - -
R3‑000513 Modification of the CRC description - -
R3‑000514 Modification of the CRC description - -
R3‑000515 - - -
R3‑000516 - - -
R3‑000517 - - -
R3‑000520 - - -
R3‑000521 - - -
R3‑000522 - - -
R3‑000523 - - -
R3‑000526 - - -
R3‑000527 - - -
R3‑000528 Generalisation of the combining/splitting functionality in UTRAN - -
R3‑000529 - - -
R3‑000530 - - -
R3‑000531 - - -
R3‑000532 - - -
R3‑000533 Introduction of ‘Presence’ information element for Extension - -
R3‑000534 - - -
R3‑000535 - - -
R3‑000536 Introduction of ‘Presence’ information element for Extension - -
R3‑000537 - - -
R3‑000538 - - -
R3‑000539 Introduction of ‘Presence’ information element for Extension - -
R3‑000540 Generalisation of the - -
R3‑000541 - - -
R3‑000542 Generalisation of the combining/splitting functionality in the Node B - -
R3‑000543 PDSCH and PUSCH handling in NodeB - -
R3‑000544 Functional list update - -
R3‑000545 - - -
R3‑000546 - - -
R3‑000547 - - -
R3‑000548 - - -
R3‑000549 - - -
R3‑000550 - - -
R3‑000551 - - -
R3‑000552 - - -
R3‑000553 - - -
R3‑000554 Modification for number of PCH channels for TDD - -
R3‑000555 Editorial changes to 25.427 - -
R3‑000557 Aligned definition of Rx Timing Deviation - -
R3‑000558 Corrections to 25.427 on DTX - -
R3‑000559 Corrections to 25.435 on DTX - -
R3‑000560 Aligned definition of Rx Timing Deviation - -
R3‑000561 Add QE in USCH Data Frame - -
R3‑000562 Correction of PI Bitmapping for TDD - -
R3‑000563 Aligned definition of Rx Timing Deviation - -
R3‑000564 - - -
R3‑000565 Changes for USCH - -
R3‑000566 USCH over Iur - -
R3‑000567 - - -
R3‑000569 - - -
R3‑000570 - - -
R3‑000571 - - -
R3‑000572 - - -
R3‑000573 - - -
R3‑000574 - - -
R3‑000575 - - -
R3‑000576 - - -
R3‑000577 - - -
R3‑000578 - - -
R3‑000579 - - -
R3‑000580 - - -
R3‑000581 - - -
R3‑000582 - - -
R3‑000583 - - -
R3‑000585 - - -
R3‑000586 - - -
R3‑000587 - - -
R3‑000588 - - -
R3‑000591 - - -
R3‑000592 - - -
R3‑000593 - - -
R3‑000594 - - -
R3‑000595 - - -
R3‑000596 - - -
R3‑000597 - - -
R3‑000598 - - -
R3‑000599 - - -
R3‑000600 - - -
R3‑000601 UTRAN Cell-Id not visible over Iu - -
R3‑000602 Changing local RAB ID to global - -
R3‑000603 - - -
R3‑000604 - - -
R3‑000605 - - -
R3‑000606 - - -
R3‑000607 Cleanup of 25.415 - -
R3‑000608 - - -
R3‑000609 Editorial changes to RANAP - -
R3‑000610 - - -
R3‑000611 - - -
R3‑000612 - - -
R3‑000613 Correction of the tabular format for the Cause IE - -
R3‑000614 CN Domain Identifier in Target ID in Relocation Required - -
R3‑000615 - - -
R3‑000616 Clarification of when RELOCATION REQUEST ACKNOWLEDGE will contain the transparent container - -
R3‑000617 Clarifying of failure situations for RAB Assignment - -
R3‑000618 DL/UL GTP-PDU Sequence Numbers on wrong level in RAB Assignment Response - -
R3‑000619 - - -
R3‑000620 Clarification of the interaction between Event Reported and Direct Reported Location Reporting - -
R3‑000621 - - -
R3‑000622 - - -
R3‑000623 Aligning the definition of N-PDU Sequence Number throughout RANAP - -
R3‑000624 Cause value “RAB pre-empted” moved from IU RELEASE REQUEST to RAB RELEASE REQUEST - -
R3‑000625 Clarification of relation between RAB and Radio Bearers - -
R3‑000626 Cause value to use in connection with Relocation Preparation - -
R3‑000627 Correction of range for security algorithms and number of keys - -
R3‑000628 - - -
R3‑000629 Security information in Relocation messages - -
R3‑000630 Resetting of HFN when new security keys are activated - -
R3‑000631 - - -
R3‑000632 - - -
R3‑000633 IPv6 support as optional in Iu and Gn - -
R3‑000634 Correction and clarification of IP over ATM in 25.414, rev 1 - -
R3‑000635 Clarification of Multi protocol encapsulation - -
R3‑000636 Removal of UDP port description in 25.414 - -
r3‑000637 - - -
R3‑000638 - - -
r3‑000639 - - -
r3‑000640 Addition of exception to Error Indication - -
r3‑000641 - - -
r3‑000642 - - -
R3‑000643 - - -
R3‑000644 - - -
R3‑000645 - - -
R3‑000646 - - -
R3‑000647 - - -
R3‑000648 - - -
R3‑000649 - - -
R3‑000650 CR to 25.413: missing cause value in RANAP (CR11r1) - -
R3‑000651 CR to 25.413: cause value range of cause miscelleneous in RANAP (CR9r1) - -
R3‑000652 CR to 25.413: Cause value related to relocation (CR10r1) - -
R3‑000653 - - -
R3‑000654 - - -
R3‑000655 CR to 25.433: Editorial Correction of the ASN.1 with the Syntax Checking of the NBAP : PDU Module and correction of the tarbular format. (CR24r1) - -
R3‑000656 - - -
R3‑000657 - - -
R3‑000659 - - -
R3‑000660 - - -
R3‑000661 - - -
R3‑000662 - - -
R3‑000663 - - -
R3‑000664 - - -
R3‑000665 - - -
R3‑000666 - - -
R3‑000667 Correction of Node B common resources for TDD - -
R3‑000668 - - -
R3‑000669 - - -
R3‑000670 - - -
R3‑000671 - - -
R3‑000673 - - -
R3‑000674 - - -
R3‑000675 - - -
R3‑000676 - - -
R3‑000677 - - -
R3‑000678 Removal of interaction between Iu Release and Relocation Resource - -
R3‑000679 CN intitiated RAB release during ongoing RAB Assingment procedure - -
R3‑000680 - - -
R3‑000681 - - -
R3‑000682 - - -
R3‑000683 - - -
R3‑000684 - - -
R3‑000685 - - -
R3‑000686 - - -
R3‑000687 - - -
R3‑000688 - - -
R3‑000689 - - -
R3‑000690 - - -
R3‑000691 - - -
R3‑000692 - - -
R3‑000693 - - -
R3‑000694 - - -
R3‑000695 - - -
R3‑000696 - - -
R3‑000697 - - -
R3‑000698 - - -
R3‑000699 - - -
R3‑000700 - - -
R3‑000701 - - -
R3‑000702 - - -
R3‑000703 - - -
R3‑000704 CR to 25.413: Editorial changes to RANAP for better readability the level of indentation has been indicated by arrows. - -
R3‑000705 - - -
R3‑000706 - - -
R3‑000707 - - -
R3‑000708 - - -
R3‑000710 - - -
R3‑000711 Relocation execution trigger - -
R3‑000712 Start Timer TDATAfwd upon reception of RELOCATION COMMAND - -
R3‑000713 - - -
r3‑000714 - - -
R3‑000715 Removal of Rate Control from Iu-UP-Status Request primitive - -
R3‑000716 - - -
R3‑000717 - - -
R3‑000718 - - -
R3‑000719 - - -
R3‑000720 - - -
R3‑000721 - - -
R3‑000722 - - -
r3‑000723 - - -
R3‑000726 - - -
R3‑000727 - - -
R3‑000728 Addition of measurement threshold information elements. - -
R3‑000729 Addition of measurement threshold information elements. - -
R3‑000730 Clarification on criticality modelling - -
R3‑000731 Clarification on criticality modelling - -
R3‑000732 Clarification on criticality modelling - -
R3‑000733 This is an update to tdoc R3-000532. New CR28r1. - -
R3‑000734 This is an update to trdoc R3-000535. New CR32r1. - -
R3‑000735 Introduction of ‘Repetition Number’ into ‘Criticality Diagnostics’ - -
R3‑000736 - - -
R3‑000737 Proposed changes to NBAP to incorporate Node B capacity modelling - -
R3‑000738 Proposed changes to RNSAP ASN.1 descriptions for private messages - -
R3‑000740 - - -
R3‑000741 - - -
R3‑000742 Protocol stack updates for Iu-PS - -
R3‑000743 Protocol stack updates for Iu-PS - -
R3‑000744 CR to 25.423: Editorial changes to RNSAP for better readability the level of indentation has been indicated by arrows. - -
R3‑000745 CR to 25.433: Editorial changes to NBAP for better readability the level of indentation has been indicated by arrows. - -
R3‑000746 - - -
R3‑000747 - - -
R3‑000748 Clarification on the ''RLC Mode'' parameter - -
R3‑000749 - - -
R3‑000750 Introduction of RLS in NBAP - -
R3‑000751 Introduction of RLS in RNSAP - -
R3‑000752 - - -
R3‑000753 Restriction to allowed procedure parallelism - -
R3‑000754 Restriction to allowed procedure parallelism - -
R3‑000755 Inclusion of Beta C/D TFCS - -
R3‑000756 Inclusion of Beta C/D TFCS - -
R3‑000757 UL Interference for TDD - -
R3‑000758 UL Interference for TDD - -
R3‑000759 - - -
R3‑000760 Update to R3-000441. - -
R3‑000761 - - -
R3‑000762 DCH Frame Protocol Error Handling Clarification - -
R3‑000763 CCH Frame Protocol error handling - -
R3‑000766 - - -
R3‑000767 - - -
R3‑000768 - - -
R3‑000769 - - -
R3‑000770 Modification to “TGD” unit and range (RNSAP) - -
R3‑000771 Modification to “TGD” unit and range (NBAP) - -
R3‑000772 - - -
R3‑000773 - - -
R3‑000774 Definition of the DL Power IE - -
R3‑000775 Clarification on the definition of the DL Power IE - -
R3‑000776 - - -
R3‑000777 Clarification on the definition of the parameter - -
R3‑000778 - - -
R3‑000779 Replacement of the mean bit rate parameter with the 'TrCh Source Statistics Descriptor' - -
R3‑000780 TDD Neighbor Cell Power - -
R3‑000781 O&M data addition - -
R3‑000782 Modification of the CRC description - -
R3‑000783 Initialisation and rate control - -
R3‑000784 - - -
R3‑000785 Time Alignment - -
R3‑000786 Addition of “Cell Individual Offset” IE to Neighbouring Cell Information - -
R3‑000788 - - -
r3‑000789 Addition of exception to Error Indication - -
r3‑000790 Addition of exception to Error Indication - -
R3‑000791 Problem with piggybacking RADIO LINK SETUP REQUEST message on SCCP: CR message - -
R3‑000792 - - -
R3‑000793 Clarification on the C-RNTI parameter in UL signalling transfer procedure - -
R3‑000794 - - -
R3‑000796 Modification of System Information related IEs - -
R3‑000797 estructuring of System Information Update Request - -
R3‑000798 - - -
R3‑000799 Corrections of RANAP RAB parameters - -
R3‑000800 Definition of global RAB ID in RANAP - -
R3‑000801 Renaming NAS Binding information to RAB ID and removing local RAB ID in RANAP - -
R3‑000802 - - -
R3‑000803 Addition of cause values for NBAP block resource procedure - -
R3‑000804 Addition of new indication type category in Resource Status Indication message - -
R3‑000805 - - -
R3‑000806 - - -
R3‑000807 - - -
R3‑000808 - - -
R3‑000809 - - -
R3‑000810 - - -
R3‑000811 - - -
R3‑000812 - - -
R3‑000814 Editorial fault in tabular format - -
R3‑000815 Clarification on the DL power control procedure and message - -
R3‑000816 Clarification on the DL power control procedure and message - -
R3‑000817 - - -
R3‑000818 Removal of Sync Case 3 - -
R3‑000819 Clarifications to Implementation Specific O&M Transport - -
R3‑000820 Protocol stack updates - -
R3‑000821 Protocol stack updates - -
R3‑000822 Some Editorial modifications to RNSAP - -
R3‑000823 Some Editorial modifications to NBAP - -
R3‑000824 - - -
R3‑000825 - - -
R3‑000826 - - -
R3‑000827 - - -
R3‑000828 Addition of Spare Extension. - -
R3‑000829 Addition of Spare Extension. - -
R3‑000830 Addition of Spare Extension. - -
R3‑000831 - - -
R3‑000832 - - -
R3‑000833 - - -
R3‑000834 - - -
R3‑000835 - - -
R3‑000836 - - -
R3‑000839 - - -
R3‑000840 - - -
R3‑000841 - - -
R3‑000842 Addition of Paging related parameter: CR53r2 - -
R3‑000844 CR to 25.413: Modifying Conditions for security information in Source RNC to Target RNC Transparent Container - -
R3‑000845 - - -
R3‑000846 CR to 25.413: Clarification of CN actions for Iu Release Request - -
R3‑000847 CR to 25.413: Editorial correction of cause in RANAP - -
R3‑000848 - - -
R3‑000849 - - -
R3‑000852 Problem with piggybacking RADIO LINK SETUP REQUEST message on SCCP: CR message - -
R3‑000853 Maximum allowed UL Tx Power in a cell - -
R3‑000854 Introduction of “TFCI - -
R3‑000855 - - -
R3‑000856 Quality of Service differentiation over Iu-PS - -
R3‑000857 Support of infinite PD in compressed mode (RNSAP) - -
R3‑000858 Support of infinite PD in compressed mode (RNSAP) - -
R3‑000860 Editorial update of RNSAP - -
R3‑000861 - - -
R3‑000862 - - -
R3‑000863 UL and DL UARFCN (RNSAP) - -
R3‑000864 UL and DL UARFCN (NBAP) - -
R3‑000865 Addition of Call Trace Deactivation functionality - -
R3‑000866 Criticality assignment for NBAP - -
R3‑000867 Criticality assignment for RNSAP - -
R3‑000868 - - -
R3‑000869 - - -
R3‑000870 - - -
R3‑000871 - - -
R3‑000872 - - -
R3‑000873 - - -
R3‑000874 - - -
r3‑000875 - - -
R3‑000876 - - -
R3‑000877 - - -
R3‑000878 Radio Interface Parameter Updates - -
R3‑000879 - - -
R3‑000880 Extension with CBS Topic - -
R3‑000881 - - -
R3‑000882 - - -
R3‑000883 - - -
R3‑000884 Clarifications in the Paging and Common ID procedures - -
R3‑000885 Clarification of Elementary Procedure Definition - -
R3‑000886 - - -
R3‑000887 - - -
R3‑000888 Transport layer in Iub U-Plane. - -
R3‑000889 - - -
R3‑000890 - - -
R3‑000891 Changes for CPCH - -
R3‑000892 Corrections in the TS 25.402 (the one that includes CR1 and CR2) - -
R3‑000893 Addition of Time Alignment Handling feature - -
R3‑000894 - - -
R3‑000895 - - -
R3‑000896 - - -
R3‑000897 - - -
R3‑000899 Formal cleanup of 25.414 - -
R3‑000900 Editorial modifications of RNSAP version 3.0.0 - -
R3‑000901 Correction for RACH - -
R3‑000902 Clarification on the ''RLC Mode'' parameter - -
R3‑000903 Power Ramping [RNSAP] - -
R3‑000904 Beginning of DL transmission in one RL - -
R3‑000905 DL user plane synchronisation - -
R3‑000906 - - -
R3‑000907 - - -
R3‑000908 - - -
R3‑000909 - - -
R3‑000910 - - -
R3‑000911 - - -
R3‑000912 - - -
R3‑000913 Handling of possible inconsistencies between LAC and SAI in Initial UE message - -
R3‑000914 CR to 25.413: Correcting the conditions for RAB information in Relocation Request Acknowledge message - -
R3‑000918 - - -
R3‑000919 - - -
R3‑000920 CR to 25.413: Clarification of CN actions for RAB Release Request - -
R3‑000921 - - -
R3‑000922 - - -
R3‑000923 - - -
R3‑000926 - - -
R3‑000928 - - -
R3‑000929 - - -
R3‑000930 - - -
r3‑000931 High-level Iu interface changes for SA Broadcast - -
R3‑000932 Extension with Service Area Broadcast Protocol - -
R3‑000933 - - -
R3‑000934 ddition of IEs required by the DRAC procedure in RNSAP messages - -
R3‑000935 - - -
R3‑000936 Target Cell ID at SRNS Relocation with UE involvement - -
R3‑000937 Introduction of Node B synchronisation of the last 8 bits of SFN - -
R3‑000938 CR to 25.413: Addition of a Cause Value - ‘Repeated Integrity Checking Failure’ for Iu Release Request - -
R3‑000939 Change of definition of QE - -
R3‑000940 Change of definition of QE - -
R3‑000941 - - -
R3‑000942 Additional IEs to Neighbouring Cell Information regarding Tx Diversity - -
R3‑000944 Update to R3-000478: CR32r1 - -
R3‑000945 RL-Failure/Restoration procedure text update - -
R3‑000946 - - -
R3‑000947 - - -
R3‑000948 Iu signalling connection identity: CR67r4 - -
R3‑000949 A new IE for “RL information” regarding Transmit Diversity (RNSAP) - -
R3‑000951 A new IE for “RL information” regarding Transmit Diversity (NBAP) - -
R3‑000952 Changes for CPCH - -
R3‑000953 - - -
R3‑000954 Changes for CPCH - -
R3‑000955 - - -
R3‑000956 - - -
R3‑000957 - - -
R3‑000958 DSCH and USCH over Iur - -
r3‑000959 Alignment of PDCP Sequence Number Length with RAN 2 - -
R3‑000960 - - -
R3‑000961 - - -
R3‑000962 Changes for CPCH - -
R3‑000963 Coding and definition of RANAP Relocation InformationCR56r2 - -
R3‑000964 - - -
R3‑000965 Rearrangement of Neighbouring Cell Information group - -
R3‑000966 Physical shared channel reconfiguration - -
R3‑000967 - - -
R3‑000968 - - -
R3‑000969 Modification to DSCH frame protocol - -
R3‑000970 Removal of Sync Case 3 - -
R3‑000971 Clarification of using IP over ATM - -
R3‑000973 - - -
R3‑000974 - - -
R3‑000975 CR to 25.423: Refinement of Tabular and ASN.1 in RNSAP - -
R3‑000976 Capacity Modeling of Node B - -
R3‑000977 Corrections to 25.401 - -
R3‑000979 Inclusion of DSCH and [TDD USCH] FP procedures - -
R3‑000980 - - -

page generated from database: 2019-10-18 15:20:11