The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R2-11 - 2000-02-28 to 2000-03-03, TURIN

meeting id: R2-11 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R2‑000292 - - -
R2‑000293 Draft Report of the 10th TSG-RAN meeting 3GPP support team -
R2‑000294 Approved Report of the 10th TSG-RAN meeting 3GPP support team -
R2‑000295 - - -
R2‑000296 - - -
R2‑000297 - - -
R2‑000298 - - -
R2‑000299 - - -
R2‑000300 - - -
R2‑000301 - - -
R2‑000302 - - -
R2‑000303 - - -
R2‑000304 - - -
R2‑000305 - - -
R2‑000306 - - -
R2‑000307 - - -
R2‑000308 - - -
R2‑000309 - - -
R2‑000310 Liaison on UE processing capabilities RAN WG1 -
R2‑000311 - - -
R2‑000312 Liaison to TSG-R WG2 and TSG-R WG4 on proposed changes to TR25.926 regarding the need to support downlink and uplink compressed modes TSG-R WG1 -
R2‑000313 : liaison statement on support of compressed mode by the UE Source: RAN WG1 -
R2‑000314 - - -
R2‑000315 - - -
R2‑000316 - - -
R2‑000317 - - -
R2‑000318 - - -
R2‑000319 - - -
R2‑000320 - - -
R2‑000321 - - -
R2‑000322 - - -
R2‑000323 - - -
R2‑000324 - - -
R2‑000325 - - -
R2‑000326 - - -
R2‑000327 - - -
R2‑000328 - - -
R2‑000329 - - -
R2‑000330 - - -
R2‑000331 - - -
R2‑000332 - - -
R2‑000333 - - -
R2‑000334 - - -
R2‑000335 - - -
R2‑000336 - - -
R2‑000337 - - -
R2‑000338 - - -
R2‑000339 - - -
R2‑000340 - - -
R2‑000341 - - -
R2‑000342 - - -
R2‑000344 - - -
R2‑000345 - - -
R2‑000346 PDSCH multi-code - -
R2‑000347 - - -
R2‑000348 PDSCH code usage and signalling - -
R2‑000349 - - -
R2‑000350 - - -
R2‑000351 - - -
R2‑000353 - - -
R2‑000354 - - -
R2‑000355 - - -
R2‑000356 - - -
R2‑000357 Support of Multiple CCTrCH's in TDD Mode - -
R2‑000358 - - -
R2‑000360 - - -
R2‑000362 - - -
R2‑000363 - - -
R2‑000368 - - -
R2‑000369 - - -
R2‑000370 - - -
R2‑000371 Corrections to Timer_discard procedures - -
R2‑000372 - - -
R2‑000373 - - -
R2‑000374 - - -
R2‑000375 - - -
R2‑000376 - - -
R2‑000377 - - -
R2‑000378 - - -
R2‑000379 General error handling procedures - -
R2‑000380 - - -
R2‑000381 - - -
R2‑000382 - - -
R2‑000383 - - -
R2‑000384 - - -
R2‑000385 - - -
R2‑000386 - - -
R2‑000387 UTRAN mobility information elements - -
R2‑000388 - - -
R2‑000389 - - -
R2‑000390 - - -
R2‑000391 UE variables - -
R2‑000392 - - -
R2‑000393 Usage of pilot bits - -
R2‑000394 System information procedure corrections - -
R2‑000395 - - -
R2‑000396 RRC message extensions - -
R2‑000397 - - -
R2‑000398 - - -
R2‑000399 Physical channel BER - -
R2‑000400 - - -
R2‑000401 - - -
R2‑000402 Restructuring - -
R2‑000403 - - -
R2‑000404 - - -
R2‑000405 - - -
R2‑000406 Redirection of RRC connection setup - -
R2‑000407 - - -
R2‑000408 - - -
R2‑000409 Updates to RRC Initialization Information transparent container and addition of reverse direction container description - -
R2‑000410 - - -
R2‑000411 - - -
R2‑000412 - - -
R2‑000413 - - -
R2‑000414 - - -
R2‑000416 - - -
R2‑000417 - - -
R2‑000419 - - -
R2‑000420 - - -
R2‑000421 - - -
R2‑000422 - - -
R2‑000423 - - -
R2‑000424 - - -
R2‑000425 - - -
R2‑000427 - - -
R2‑000429 - - -
R2‑000430 - - -
R2‑000431 - - -
R2‑000432 Random access transmission sequence - -
R2‑000433 UE-ID type indication - -
R2‑000434 - - -
R2‑000435 - - -
R2‑000436 - - -
R2‑000437 - - -
R2‑000439 Editorial modification on AMR trblk size - -
R2‑000440 Updated RLC SDL - -
R2‑000442 - - -
R2‑000443 - - -
R2‑000444 - - -
R2‑000445 - - -
R2‑000446 - - -
R2‑000447 - - -
R2‑000448 - - -
R2‑000449 - - -
R2‑000450 - - -
R2‑000451 - - -
R2‑000452 - - -
R2‑000453 - - -
R2‑000454 - - -
R2‑000456 - - -
R2‑000458 - - -
R2‑000459 - - -
R2‑000460 - - -
R2‑000461 - - -
R2‑000463 - - -
R2‑000464 - - -
R2‑000465 - - -
R2‑000466 - - -
R2‑000467 - - -
R2‑000468 Corrections to TDD specific parameters in PICH info - -
R2‑000469 Editorial modifications - -
R2‑000470 - - -
R2‑000472 - - -
R2‑000473 - - -
R2‑000474 - - -
R2‑000475 - - -
R2‑000476 - - -
R2‑000477 - - -
R2‑000478 - - -
R2‑000479 - - -
R2‑000480 - - -
R2‑000482 - - -
R2‑000484 - - -
R2‑000486 - - -
R2‑000487 - - -
R2‑000488 Modified description of DRX - -
R2‑000489 - - -
R2‑000490 Reporting cell status - -
R2‑000491 - - -
R2‑000492 - - -
R2‑000493 - - -
R2‑000494 - - -
R2‑000495 - - -
R2‑000496 - - -
R2‑000497 Reconfiguration of ciphering - -
R2‑000498 Ciphering and integrity HFN - -
R2‑000499 - - -
R2‑000500 - - -
R2‑000501 Corrections and clarifications on L1 and L2 functionality descriptions - -
R2‑000502 - - -
R2‑000503 - - -
R2‑000504 - - -
R2‑000506 - - -
R2‑000507 - - -
R2‑000509 - - -
R2‑000511 Correction of RNC functions - -
R2‑000512 - - -
R2‑000513 - - -
R2‑000514 - - -
R2‑000515 - - -
R2‑000516 Clarification to layer 1 model regarding transport blocks received by UE with CRC failure - -
R2‑000517 - - -
R2‑000518 - - -
R2‑000519 - - -
R2‑000520 Modification of the 'presence' column specification in tabular format, and other editorial modifications - -
R2‑000521 - - -
R2‑000522 - - -
R2‑000523 - - -
R2‑000524 - - -
R2‑000525 CPCH start of message indication - -
R2‑000526 - - -
R2‑000527 Variable Rate Packet Transmission for uplink DCH - -
R2‑000528 Transport Block Transmission - -
R2‑000529 RACH transmission control procedure - -
R2‑000530 Clarification of the different LMU types - -
R2‑000531 - - -
R2‑000532 Primitives for CPCH Abnormal Situation Handling - -
R2‑000533 - - -
R2‑000534 - - -
R2‑000535 Network assisted GPS LCS - -
R2‑000536 OTDOA - GPS Location Procedures - -
R2‑000538 UE individual DRX cycles in CELL_PCH and URA_PCH states - -
R2‑000539 - - -
R2‑000540 - - -
R2‑000541 - - -
R2‑000542 - - -
R2‑000543 - - -
R2‑000544 Editorial corrections on section 11.2 - -
R2‑000545 - - -
R2‑000546 Cell re-selection criteria including HCS - -
R2‑000547 Identification of Shared Channel Physical Configuration in TDD Mode - -
R2‑000548 - - -
R2‑000549 Uplink Outer Loop Power Control During Hard Handover - -
R2‑000550 - - -
R2‑000551 - - -
R2‑000552 - - -
R2‑000553 LMU signalling description - -
R2‑000554 New SIB for LCS - -
R2‑000555 - - -
R2‑000556 Segmentation of RLC SDUs - -
R2‑000557 STATUS PDUs - -
R2‑000558 - - -
R2‑000559 - - -
R2‑000560 - - -
R2‑000561 - - -
R2‑000562 - - -
R2‑000564 CPCH Emergency Stop sequence - -
R2‑000565 CPCH start of message indication - -
R2‑000566 CPCH including Channel Assignment - -
R2‑000567 - - -
R2‑000568 Removal of SCH - -
R2‑000569 Removal of SCH and SCCH - -
R2‑000570 Removal of SCH and SCCH - -
R2‑000571 Removal of SCCH - -
R2‑000572 Removal of synchronisation Case 3 - -
R2‑000573 - - -
R2‑000574 - - -
R2‑000575 - - -
R2‑000576 - - -
R2‑000577 - - -
R2‑000578 - - -
R2‑000579 - - -
R2‑000580 - - -
R2‑000581 - - -
R2‑000582 - - -
R2‑000583 - - -
R2‑000584 - - -
R2‑000585 - - -
R2‑000586 - - -
R2‑000587 Downlink outer loop power control - -
R2‑000588 - - -
R2‑000589 - - -
R2‑000590 - - -
R2‑000591 - - -
R2‑000592 Uplink Physical Channel Control in TDD Mode - -
R2‑000593 Replacement of Time of Arrival Measurement by RTT - -
R2‑000594 - - -
R2‑000595 - - -
R2‑000596 - - -
R2‑000597 RLC Editorial Changes - -
R2‑000598 UE information elements - -
R2‑000600 Physical shared channel allocation procedure - -
R2‑000601 UE individual DRX cycles in CELL_PCH and URA_PCH states - -
R2‑000602 DRX indicator presence and state entering mechanism at the end of a procedure - -
R2‑000603 Inter-frequency measurements in CELL_FACH state - -
R2‑000605 Physical channel information elements - -
R2‑000606 Actions when entering idle mode - -
R2‑000608 - - -
R2‑000609 - - -
R2‑000610 - - -
R2‑000611 - - -
R2‑000612 - - -
R2‑000613 - - -
R2‑000614 - - -
R2‑000615 - - -
R2‑000616 - - -
R2‑000617 - - -
R2‑000618 - - -
R2‑000619 Improvement of integers and enumerated, and introduction of reals and octet strings - -
R2‑000620 Bit order of PDCP PDUs - -
R2‑000621 - - -
R2‑000622 RRC measurement filtering parameters - -
R2‑000623 - - -
R2‑000624 Modifications related to FDD mode DSCH - -
R2‑000625 RB information elements - -
R2‑000626 UE capability information elements - -
R2‑000627 - - -
R2‑000628 Correction of messages and bit ordering - -
R2‑000629 TX Diversity - -
R2‑000630 Transfer of initial information from UE to target RNC prior to handover to UTRAN - -
R2‑000631 Integrity protection function - -
R2‑000632 Update of tabular format Section 10 - -
R2‑000633 ASN.1 description - -
R2‑000634 Modification of SDU discard to support virtual PDCP sequence numbers - -
R2‑000635 Corrections to RLC - -
R2‑000636 Changes to PDCP - -
R2‑000637 - - -
R2‑000638 RAB-RB relations - -
R2‑000639 - - -
R2‑000640 - - -
R2‑000641 - - -
R2‑000642 - - -
R2‑000643 - - -
R2‑000644 Separation of physical channel BER measurements - -
R2‑000645 Order of bit transmission for RLC PDUs - -
R2‑000647 - - -
R2‑000648 Revision of compressed mode description - -
R2‑000649 - - -
R2‑000650 - - -
R2‑000651 Inclusion of Location Services - -
R2‑000652 Clarification of RLC AMD Model - -
R2‑000653 - - -
R2‑000654 CPCH - -
R2‑000655 Incorporation of Measurement filtering model - -
R2‑000656 - - -
R2‑000657 - - -
R2‑000658 Introduction of mapping function information in Cell selection and - -
R2‑000659 Handover to UTRAN including procedure for pre- configuration - -
R2‑000660 Enhancements to RRC connection re-establishment procedure - -
R2‑000661 - - -
R2‑000662 - - -
R2‑000663 - - -
R2‑000664 - - -
R2‑000665 - - -
R2‑000666 - - -
R2‑000667 - - -
R2‑000668 - - -
R2‑000669 - - -
R2‑000670 - - -
R2‑000671 Clarification of bit order - -
R2‑000672 Changes in RRC messages to support lossless SRNC relocation - -
R2‑000673 Application of Access Service Classes and relation to Access Classes - -
R2‑000674 Measurements of unlisted neighbouring cells - -
R2‑000675 CN information elements - -

page generated from database: 2019-08-20 08:43:13