The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R4-10 - 2000-01-18 to 2000-01-21, SAN JOSE

meeting id: R4-10 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R4‑000001 - - -
R4‑000002 - - -
R4‑000003 - - -
R4‑000004 Conformance test descriptions for spectrum emission mask and ACLR - -
R4‑000005 Proposed CR to TS 25.142 on Siemens AG, Rohde & Schwarz -
R4‑000006 Conformance test description for Adjacent Channel Selectivity (ACS) - -
R4‑000007 Conformance test description for blocking characteristics - -
R4‑000008 Proposed CR to TS 25.142 on Siemens AG, Rohde & Schwarz -
R4‑000009 - - -
R4‑000010 An evaluation of handover criteria Telia AB -
R4‑000011 - - -
R4‑000012 - - -
R4‑000013 - - -
R4‑000014 - - -
R4‑000015 - - -
R4‑000016 - - -
R4‑000018 - - -
R4‑000019 Removal of chapter 6.6.2.3 in 25.104 - -
R4‑000020 Simulation Results of CPICH RSCP/RSSI vrs. CPICH RSCP/ISCP Nokia -
R4‑000021 - - -
R4‑000022 - - -
R4‑000023 - - -
R4‑000024 - - -
R4‑000025 Corrections to TS 25.113 - -
R4‑000026 Corrections for BS FDD Modulation Accuracy - -
R4‑000027 - - -
R4‑000028 BS TDD Blocking Requirements for ITU Region 2 and editorial corrections SIEMENS -
R4‑000029 Revised Spurious Emission Requirements for 25.105 SIEMENS -
R4‑000030 Clarification of Receiver Dynamic Range requirement - -
R4‑000031 - - -
R4‑000032 - - -
R4‑000033 - - -
R4‑000034 - - -
R4‑000036 Further SSDT Simulation Results for UE Performance Tests Fujitsu -
R4‑000037 Pico Base station maximum power InterDigital -
R4‑000038 TDD Base station classification criteria and classification items InterDigital -
R4‑000040 Description of Signal Levels for Receiver Characteristics - -
R4‑000041 - - -
R4‑000042 - - -
R4‑000043 - - -
R4‑000044 - - -
R4‑000045 - - -
R4‑000046 - - -
R4‑000047 - - -
R4‑000048 - - -
R4‑000049 - - -
R4‑000050 - - -
R4‑000052 Downlink outer loop power control (revised) Ericsson -
R4‑000053 TPC command combining R4 -
R4‑000054 - - -
R4‑000055 - - -
R4‑000056 - - -
R4‑000057 - - -
R4‑000058 Definitions for TS 25.113 - -
R4‑000059 Clarifications to measurement channels - -
R4‑000060 - - -
R4‑000061 - - -
R4‑000062 Editorial changes - -
R4‑000063 - - -
R4‑000064 - - -
r4‑000065 - - -
r4‑000066 - - -
r4‑000067 Occupied bandwidth measurement - -
r4‑000068 - - -
r4‑000069 - - -
r4‑000070 Clarification of "random" in relation to injected bit errors - -
R4‑000072 - - -
R4‑000073 - - -
R4‑000074 - - -
R4‑000075 - - -
R4‑000076 TR 25.942v2.1.2 “RF System Scenarios” Omnitel Pronto Italia S.p.a. -
R4‑000077 - - -
R4‑000078 Simulation results for cell selection single carrier/cell case MOTOROLA -
R4‑000079 - - -
R4‑000080 Test Models for transmitter - -
R4‑000081 - - -
R4‑000082 - - -
R4‑000083 Block STTD test specifications for P-CCPCH in TS 25.102 Motorola -
R4‑000084 Proposal for performance requirement of Blind transport format detection NTT DoCoMo -
R4‑000085 LS on the measurement requirements for GSM in UMTS ETSI STC SMG2 -
R4‑000086 Editorial changes to 25.104 - -
R4‑000088 Revised Spurious Emission Requirements - -
R4‑000089 Proposal for channel models in TR 25.943 Ericsson -
R4‑000090 FDD UE minimum transmission power MOTOROLA -
R4‑000091 CPICH RSCP/RSSI vs. CPICH RSCP/ISCP based Handover with Measurement Errors NOKIA -
r4‑000093 ACLR measurement - -
R4‑000094 Peak code domain error measurement - -
R4‑000095 Blocking test - -
R4‑000096 Change of propagation conditions for Case 2 - -
R4‑000097 Answer to LS on UE Measurement of ISCP RAN WG 1 -
R4‑000098 - - -
R4‑000099 BS TDD Blocking Requirements for ITU Region 2 and editorial corrections SIEMENS -
R4‑000100 Corrections of spurious emissions aligning to GSM for UTRA: TDD BS - -
R4‑000101 Corrections of spurious emissions aligning to GSM for UTRA: FDD BS - -
R4‑000103 Power measurement definitions for wanted signal (in-channel signal) - -
R4‑000104 Regional requirements in BS specifications 25.104 and 25.141 Ericsson -
R4‑000105 Assumptions for link level simulations – AH01DL Ericsson, Nokia, NEC, NTT DoCoMo, Motorola -
R4‑000106 Off-line discussion result for performance requirement of Samsung Electronics Co. -
R4‑000107 - - -

page generated from database: 2019-12-06 10:39:20