The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R3-49 - 2005-11-07 to 2005-11-11, Seoul

meeting id: R3-49 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R3‑051160 - - -
R3‑051161 - - -
R3‑051162 - - -
R3‑051163 - - -
R3‑051164 Addition of the U-TDOA positioning method to the UTRAN - -
R3‑051165 Enabling the Providing of Velocity - -
R3‑051166 Enabling the Providing of Velocity - -
R3‑051167 Enabling the Providing of Velocity - -
R3‑051168 Enabling the Providing of Velocity - -
R3‑051170 - - -
R3‑051171 - - -
R3‑051172 - - -
R3‑051173 - - -
R3‑051174 - - -
R3‑051175 - - -
R3‑051176 - - -
R3‑051177 - - -
R3‑051178 - - -
R3‑051179 - - -
R3‑051180 - - -
R3‑051181 - - -
R3‑051182 - - -
R3‑051183 - - -
R3‑051184 - - -
R3‑051185 - - -
R3‑051186 Correction of performance measurement point IRATHO.SuccOutPSUE - -
R3‑051187 Correction of performance measurement point IRATHO.SuccOutPSUE - -
R3‑051188 Clarification on transfer of Shared Network Information with no SNA configured - -
R3‑051189 Clarification on transfer of Shared Network Information with no SNA configured - -
R3‑051191 HARQ Info addition For E-DCH - -
R3‑051192 Clarification for the Node B behavior at E-DCH serving cell change - -
R3‑051193 Clarification for the DRNS behavior at E-DCH serving cell change - -
R3‑051194 - - -
R3‑051195 Indexed Inter-frequency RACH measurement reporting - -
R3‑051197 - - -
R3‑051198 Removing unnecessary IMEI(SV)s in MBA Trace - -
R3‑051199 - - -
R3‑051200 - - -
R3‑051201 Introduction of the Time to MBMS Data Trasfer - -
R3‑051203 - - -
R3‑051204 - - -
R3‑051207 Handling of DIRECT TRANSFER messages during the Relocation Preparation procedure - -
R3‑051208 Handling of DIRECT TRANSFER messages during the Relocation Preparation procedure - -
R3‑051209 Compressed Mode Reconfiguration - -
R3‑051210 Non EDCH Load Measurement - -
R3‑051211 EDCH Corrections and Improvements - -
R3‑051213 E-DCH HARQ RV Configuration - -
R3‑051214 E-DCH HARQ RV Configuration - -
R3‑051215 NBAP clean-up - -
R3‑051216 - - -
R3‑051217 EDCH Cell Capability Enhancement - -
R3‑051218 FDD Downlink Unidirectional DCH Indicator - -
R3‑051219 FDD Downlink Unidirectional DCH Indicator - -
R3‑051220 FDD Unidirectional DCH Indicator reconfiguration - -
R3‑051221 FDD Unidirectional DCH Indicator reconfiguration - -
R3‑051222 PCAP Review - -
R3‑051223 - - -
R3‑051224 Correctios to the synchronised radio link reconfiguration procedure for 1.28Mcps TDD - -
R3‑051225 - - -
R3‑051226 - - -
R3‑051227 - - -
R3‑051228 - - -
R3‑051229 - - -
R3‑051230 - - -
R3‑051231 Addition of TDD aspects of the U-TDOA positioning method - -
R3‑051232 - - -
R3‑051233 - - -
R3‑051234 - - -
R3‑051235 M3UA Client in IP Transport Option - -
R3‑051236 M3UA Client in IP Transport Option - -
R3‑051237 Correction of SCUDIF Relocation - -
R3‑051238 Error Handling of unused IEs - -
R3‑051239 Relocation involving some preserved RABs - -
R3‑051240 - - -
R3‑051241 CN Node Unavailable in Iu-Flex - -
R3‑051242 Overload procedure in Iu-Flex - -
R3‑051243 - - -
R3‑051244 - - -
R3‑051245 - - -
R3‑051247 HARQ Info addition For E-DCH - -
R3‑051248 - - -
R3‑051249 PCAP Review - -
R3‑051250 - - -
R3‑051251 - - -
R3‑051252 Addition of ANSI protocol options - -
R3‑051253 Addition of ANSI protocol options - -
R3‑051254 Addition of ANSI protocol options - -
R3‑051255 Rewording of interaction text from CR784 - -
R3‑051256 PS/CS registration coordination in shared RAN for MOCN - -
R3‑051257 HARQ Process Management for E-DCH - -
R3‑051258 HARQ Process Management for E-DCH - -
R3‑051259 - - -
R3‑051260 E-DCH processing issue and rate limitation - -
R3‑051261 E-DCH processing issue and rate limitation - -
R3‑051262 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051264 Cleanup of editorials found during the Rel6 review before specification freezing - -
R3‑051265 Conditions for sending HARQ Failure - -
R3‑051266 HARQ failure shall be sent on highest bearer. - -
R3‑051269 - - -
R3‑051270 Alignment of RNSAP with latest HSUPA agreements - -
R3‑051271 Alignment of NBAP with latest HSUPA agreements - -
R3‑051272 Correction on HARQ Failure Indication - -
R3‑051273 Abnormal Condition for Maximum Target Received Total Wideband Power - -
R3‑051274 Correction on E-DCH MAC-Flow to Add IE - -
R3‑051275 HSUPA DL Channel Code Allocation per Cell Portion - -
R3‑051277 Correction for HARQ Preamble and Postamble - -
R3‑051278 Correction for HARQ Preamble and Postamble - -
R3‑051279 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051280 - - -
R3‑051281 Alignment of Tables in the Common Measurement Description - -
R3‑051282 - - -
R3‑051283 ASN.1 Review Siemens Part - -
R3‑051284 - - -
R3‑051285 - - -
R3‑051286 Rapporteur's Review of 25.413 - -
R3‑051287 - - -
R3‑051288 Wording Alignment for Procedure Text - -
R3‑051289 Reporting of Reason for RL Deletion - -
R3‑051291 Introduction of UMTS 900 - -
R3‑051292 Introduction of UMTS 1700 - -
R3‑051293 Indication of Node B Overload Situations - -
R3‑051294 Introduction of E-DCH Overload Levels - -
R3‑051295 Correction for HARQ Preamble and Postamble - -
R3‑051296 Correction for HARQ Preamble and Postamble - -
R3‑051297 - - -
R3‑051298 MBMS Service Area List IE Encoding Correction - -
R3‑051299 - - -
R3‑051300 - - -
R3‑051301 - - -
R3‑051302 Alignment of RNSAP with latest HSUPA agreements - -
R3‑051303 Alignment of NBAP with latest HSUPA agreements - -
R3‑051304 - - -
R3‑051305 - - -
R3‑051306 - - -
R3‑051307 - - -
R3‑051308 - - -
R3‑051309 Introduction of UMTS 1700 requirements - -
R3‑051310 NBAP clean-up - -
R3‑051311 FDD Unidirectional DCH Indicator reconfiguration - -
R3‑051312 HARQ Process Management for E-DCH - -
R3‑051313 HARQ Process Management for E-DCH - -
R3‑051314 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051315 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051316 FDD Unidirectional DCH Indicator reconfiguration - -
R3‑051317 - - -
R3‑051318 - - -
R3‑051319 - - -
R3‑051320 - - -
R3‑051321 Introduction of the Time to MBMS Data Trasfer - -
R3‑051322 EDCH HARQ Combining Capability - -
R3‑051323 EDCH HARQ IR Combining Support Indicator - -
R3‑051324 Rewording of interaction text from CR784 - -
R3‑051325 HARQ Process Management for E-DCH - -
R3‑051326 HARQ Process Management for E-DCH - -
R3‑051327 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051328 MBMS Service Area List IE Encoding Correction - -
R3‑051329 - - -
R3‑051330 - - -
R3‑051331 Rapporteur's Review of 25.413 - -
R3‑051332 E-DCH HARQ RV Configuration - -
R3‑051333 E-DCH HARQ RV Configuration - -
R3‑051336 Alignment of RNSAP with latest HSUPA agreements - -
R3‑051337 Alignment of NBAP with latest HSUPA agreements - -
R3‑051338 Correction for HARQ Preamble and Postamble - -
R3‑051339 Correction for HARQ Preamble and Postamble - -
R3‑051340 - - -
R3‑051341 - - -
R3‑051342 - - -
R3‑051343 - - -
R3‑051344 - - -
R3‑051345 - - -
R3‑051346 - - -
R3‑051347 - - -
R3‑051348 - - -
R3‑051349 Addition of TDD aspects of the U-TDOA positioning method - -
R3‑051350 - - -
R3‑051351 - - -
R3‑051352 - - -
R3‑051353 Enabling the Providing of Velocity - -
R3‑051354 Enabling the Providing of Velocity - -
R3‑051355 - - -
R3‑051356 - - -
R3‑051357 Update of EDCH Capacity consumption law - -
R3‑051358 - - -
R3‑051359 - - -
R3‑051360 - - -
R3‑051361 Introduction of UMTS 900 - -
R3‑051362 Introduction of UMTS 1700 requirements - -
R3‑051363 - - -
R3‑051364 - - -
R3‑051365 Error Handling of unused IEs - -
R3‑051366 - - -
R3‑051367 - - -
R3‑051368 NBAP clean-up - -
R3‑051369 EDCH setup by unsynchronised reconfiguration - -
R3‑051370 EDCH setup by unsynchronised reconfiguration - -
R3‑051371 ASN.1 error corrections to RADIO LINK RECONFIGURATION READY TDD - -
R3‑051372 ASN.1 error corrections to RADIO LINK RECONFIGURATION READY TDD - -
R3‑051373 ASN.1 error corrections to RADIO LINK RECONFIGURATION READY TDD - -
R3‑051374 FDPCH and HS-SCCH power offset - -
R3‑051375 FDPCH and HS-SCCH power offset - -
R3‑051376 HARQ Process Management for E-DCH - -
R3‑051377 HARQ Process Management for E-DCH - -
R3‑051380 - - -
R3‑051381 - - -
R3‑051383 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051384 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051385 Correctios to the synchronised radio link reconfiguration procedure for 1.28Mcps TDD - -
R3‑051386 Correction on E-DCH MAC-Flow to Add IE - -
R3‑051387 ASN.1 error corrections to RADIO LINK RECONFIGURATION READY TDD - -
R3‑051388 ASN.1 error corrections to RADIO LINK RECONFIGURATION READY TDD - -
R3‑051389 ASN.1 error corrections to RADIO LINK RECONFIGURATION READY TDD - -
R3‑051390 Cleanup of editorials found during the Rel6 review before specification freezing - -
R3‑051391 - - -
R3‑051392 - - -
R3‑051393 - - -
R3‑051394 Test Procedures - -
R3‑051395 Test Procedures - -
R3‑051396 Correction to modem isolation and emission - -
R3‑051397 Correction to modem isolation and emission - -
R3‑051398 FDD Unidirectional DCH Indicator reconfiguration - -
R3‑051399 FDD Unidirectional DCH Indicator reconfiguration - -
R3‑051400 E-DCH processing issue and rate limitation - -
R3‑051401 E-DCH processing issue and rate limitation - -
R3‑051402 EDCH setup by unsynchronised reconfiguration - -
R3‑051403 EDCH setup by unsynchronised reconfiguration - -
R3‑051404 - - -
R3‑051405 - - -
R3‑051406 - - -
R3‑051407 - - -
R3‑051408 Indexed Inter-frequency RACH measurement reporting - -
R3‑051409 NBAP clean-up - -
R3‑051410 - - -
R3‑051411 Update of EDCH Capacity consumption law - -
R3‑051412 EDCH Cell Capability Enhancement - -
R3‑051413 EDCH Cell Capability Enhancement - -
R3‑051414 Conditions for sending HARQ Failure - -
R3‑051415 HARQ failure shall be sent on highest bearer. - -
R3‑051416 Reply LS on time to MBMS data transfer coding R3 -
R3‑051417 REPLY LS on “Alignment of IE encoding for MBMS” R3 -
R3‑051418 - - -
R3‑051419 - - -
R3‑051420 PS/CS registration coordination in shared RAN for MOCN - -
R3‑051421 LS on E-DCH Maximum Bitrate R3 -
R3‑051422 E-DCH processing issue and rate limitation - -
R3‑051423 E-DCH processing issue and rate limitation - -
R3‑051424 - - -
R3‑051425 correction of referencing - -
R3‑051426 correction of referencing - -
R3‑051427 RET Control Unit spurious emission simplified version - -
R3‑051428 RET Control Unit spurious emission simplified version - -
R3‑051429 LS on Relocation of Preserved RABs R3 -
R3‑051430 Compressed Mode Reconfiguration - -
R3‑051431 - - -
R3‑051432 - - -
R3‑051433 FDD Unidirectional DCH Indicator reconfiguration - -
R3‑051434 FDD Unidirectional DCH Indicator reconfiguration - -
R3‑051435 HARQ Process Management for E-DCH - -
R3‑051436 HARQ Process Management for E-DCH - -
R3‑051437 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051438 HSPA Serving Cell Change by RL Addition Procedure - -
R3‑051439 - - -
R3‑051440 RET Control Unit spurious emission simplified version - -
R3‑051441 RET Control Unit spurious emission simplified version - -
R3‑051442 - - -
R3‑051443 - - -
R3‑051444 - - -
R3‑051445 Abnormal Condition for Maximum Target Received Total Wideband Power - -
R3‑051446 Response LS on PSI/SI Information Transfer during inter-RAT PS Handover R3 -
R3‑051447 LS on PS and CS coordination in shared RAN for MOCN R3 -
R3‑051448 Indexed Inter-frequency RACH measurement reporting - -
R3‑051449 Addition of TDD aspects of the U-TDOA positioning method - -
R3‑051450 EDCH Cell Capability Enhancement - -
R3‑051451 EDCH Cell Capability Enhancement - -
R3‑051452 Alignment of RNSAP with latest HSUPA agreements - -
R3‑051453 Alignment of NBAP with latest HSUPA agreements - -
R3‑051454 LS on Support of Different Combining Schemes R3 -
R3‑051455 Enabling the Providing of Velocity - -
R3‑051456 Enabling the Providing of Velocity - -
R3‑051457 Addition of ANSI protocol options - -
R3‑051458 Addition of ANSI protocol options - -
R3‑051459 Reply LS on Synchronisation of Reconfiguration with activation time “now” R3 -
R3‑051460 LS on switched inter-RAT handovers controlled by UE R3 -

page generated from database: 2019-08-20 08:43:13