3GPP Work Item mapping to Change Requests
3GPP Work Item = 470042 (OAM-PM-UE)
This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.
| Spec | CR number and Revision | CR Title |
|---|---|---|
| 23.008 | 0330 | Minimization of Drive Tests (MDT) |
| 23.008 | 0330 rev 1 | Minimization of Drive Tests (MDT) |
| 23.008 | 0330 rev 2 | Minimization of Drive Tests (MDT) |
| 23.008 | 0338 | MDT user consent |
| 23.008 | 0338 rev 1 | MDT user consent |
| 29.002 | 1007 | Minimization of Drive Tests (MDT) |
| 29.002 | 1007 rev 1 | Minimization of Drive Tests (MDT) |
| 29.002 | 1007 rev 2 | Minimization of Drive Tests (MDT) |
| 29.002 | 1019 | MDT user consent |
| 29.002 | 1034 | Extending the Area-Scope for MDT |
| 29.002 | 1034 rev 1 | Extending the Area-Scope for MDT |
| 29.230 | 0207 | Minimization of Drive Tests (MDT) |
| 29.230 | 0207 rev 1 | Minimization of Drive Tests (MDT) |
| 29.230 | 0207 rev 2 | Minimization of Drive Tests (MDT) |
| 29.230 | 0216 | MDT user consent |
| 29.230 | 0232 | Addition of allowed PLMN-id in Area-Scope for MDT |
| 29.230 | 0232 rev 1 | Addition of allowed PLMN-id in Area-Scope for MDT |
| 29.272 | 0329 | Minimization of Drive Tests (MDT) |
| 29.272 | 0329 rev 1 | Minimization of Drive Tests (MDT) |
| 29.272 | 0329 rev 2 | Minimization of Drive Tests (MDT) |
| 29.272 | 0357 | MDT user consent |
| 29.272 | 0357 rev 1 | MDT user consent |
| 29.272 | 0357 rev 2 | MDT user consent |
| 29.272 | 0364 | Extending the Area-Scope for MDT |
| 29.272 | 0364 rev 1 | Extending the Area-Scope for MDT |
| 29.272 | 0364 rev 2 | Extending the Area-Scope for MDT |
| 29.272 | 0698 | |
| 29.272 | 0698 rev 1 | |
| 29.274 | 0975 | MDT configuration information |
| 29.274 | 0975 rev 1 | MDT configuration information |
| 29.274 | 0975 rev 2 | MDT configuration information |
| 29.274 | 0975 rev 3 | MDT configuration information |
| 29.274 | 1838 | |
| 29.274 | 1838 rev 1 | |
| 29.274 | 1838 rev 2 | |
| 29.274 | 1838 rev 3 | |
| 29.274 | 1838 rev 4 | |
| 32.421 | 0025 | Adding Requirements for managing UE based network performance measurements |
| 32.421 | 0029 rev 3 | Add requirements for security and privacy of UE-based Network Performance Measurements / MDT as required by SA3 (Security) |
| 32.421 | 0030 | Change UE based network performance measurements to MDT - Align cross-3GPP terminology on MDT work |
| 32.421 | 0032 | CR R10 32 421 clarify and correct requirements |
| 32.421 | 0034 rev 1 | MDT for multiple PLMN IDs |
| 32.421 | 0038 rev 2 | Introduce the missing MDT data controller user privacy requiremens |
| 32.421 | 0039 rev 2 | Introduce the missing MDT data controller user privacy requiremens |
| 32.421 | 0045 | Add MDT data deletion note |
| 32.421 | 0046 rev 1 | Add MDT data deletion note |
| 32.421 | 0050 | CR R10 32 421 Support multiple cells in area based MDT |
| 32.421 | 0051 | CR R11 32 421 Support multiple cells in area based MDT |
| 32.421 | 0057 rev 1 | CR 32.421 R10 Remove MDT Country Restriction |
| 32.421 | 0058 rev 1 | CR 32.421 R11 Remove MDT Country Restriction |
| 32.422 | 0080 | Adding the procedures for managing Minimization of Drive Tests (MDT) functionality |
| 32.422 | 0080 rev 1 | Adding the procedures for managing Minimization of Drive Tests (MDT) functionality |
| 32.422 | 0081 rev 2 | Correcting the handling of Minimization of Drive Tests (MDT) trace at handovers |
| 32.422 | 0083 rev 1 | Adding definition of Stage 3 coding of Minimization of Drive Tests (MDT) parameters |
| 32.422 | 0098 | Removing UE capability from Minimization of Drive Tests (MDT) parameters |
| 32.422 | 0099 | Change UE based network performance measurements to MDT - Align cross-3GPP terminology on MDT work |
| 32.422 | 0100 | CR R10 32.422 Add RLF as event trigger criteria |
| 32.422 | 0100 rev 1 | CR R10 32.422 Align the reporting trigger with RAN2 agreement |
| 32.422 | 0100 rev 2 | Align the reporting trigger with RAN2 TS 37.320 |
| 32.422 | 0101 | CR R10 32.422 Update the E-UTRAN activation mechanism for area based MDT |
| 32.422 | 0101 rev 1 | CR R10 32.422 Update the E-UTRAN activation mechanism for area based MDT to align with TS32.441 |
| 32.422 | 0101 rev 2 | Update the E-UTRAN activation mechanism for area based MDT |
| 32.422 | 0103 | CR R10 32.422 Using TCE identity in logged MDT configuration |
| 32.422 | 0103 rev 1 | CR R10 32.422 Using TCE identity in logged MDT configuration |
| 32.422 | 0103 rev 2 | CR R10 32.422 clarify TR-TRSR combination per trace session associated with a UE |
| 32.422 | 0103 rev 3 | Using TCE identity in logged MDT configuration |
| 32.422 | 0103 rev 4 | Clarify that there can be only one TRSR per TR at a given time per UE trace session for signalling based trace. |
| 32.422 | 0104 | CR R10 32.422 Removal of TCE IP Address in MDT configuration sent to UE |
| 32.422 | 0105 | CR R10 32.422 Include the user consent in procedures of Logged MDT |
| 32.422 | 0106 | CR R10 32.422 Include the user consent in MDT activation |
| 32.422 | 0107 | R10 CR to 32422v1021 adding user consent description |
| 32.422 | 0107 rev 1 | R10 CR to 32422v1021 adding user consent description |
| 32.422 | 0107 rev 2 | Adding user consent handling in MDT activation |
| 32.422 | 0107 rev 3 | Adding user consent handling in MDT activation |
| 32.422 | 0108 | R10 CR to 32422v1021 fetching TCE address |
| 32.422 | 0110 | CR R10 32 422 clarify inconsistency in EPC initiated MDT |
| 32.422 | 0111 | 32 422 Add RLF as a explicit MDT trigger |
| 32.422 | 0114 | Modify UMTS M2 measurement - Align with RAN2 25.215 and 25.225 |
| 32.422 | 0115 rev 3 | Add error handling for Management based MDT scenarios |
| 32.422 | 0116 rev 3 | Add error handling for EPC Signalling based MDT scenarios |
| 32.422 | 0120 rev 1 | Add Area scope validation for cell level granularity |
| 32.422 | 0121 rev 2 | Add error handling for PS domain MDT activation scenarios |
| 32.422 | 0122 rev 2 | Add error handling for CS domain MDT activation scenarios |
| 32.422 | 0124 rev 2 | Aligning MDT activation procedures with SA3 privacy requirements |
| 32.422 | 0125 rev 2 | Adding definition of area based MDT and subscription based MDT |
| 32.422 | 0128 rev 2 | Add behaviour of signalling-based MDT when area criterion is not met |
| 32.422 | 0133 | Add PS domain MDT activiation procedure after UE attach |
| 32.422 | 0134 | Add PS domain MDT activiation procedure after UE attach |
| 32.422 | 0137 | RAI/LAI in MDT area scope |
| 32.422 | 0141 rev 1 | RAI in MDT/LAI area scope |
| 32.422 | 0148 rev 1 | MDT measurement alignment |
| 32.422 | 0149 rev 1 | MDT measurement alignment |
| 32.422 | 0150 | Error correction on description of “TCE IP address” in MDT report |
| 32.422 | 0151 | Error correction on description of “TCE IP address” in MDT report |
| 32.422 | 0155 | Correction in flow chart for area based MDT activation in E-UTRAN |
| 32.422 | 0156 rev 1 | Correction in flow chart for area based MDT activation in E-UTRAN |
| 32.422 | 0159 rev 1 | Align the user consent description with RAN3 and add description on activating MDT in home operator that uses more than one PLMN |
| 32.422 | 0160 rev 1 | Align the user consent description with RAN3 and add description on activating MDT in home operator that uses more than one PLMN |
| 32.422 | 0163 rev 2 | Correct MDT UE selection procedures to protect user privacy |
| 32.422 | 0164 rev 2 | Correct MDT UE selection procedures to protect user privacy |
| 32.422 | 0173 rev 1 | Align the Reporting Trigger parameter with the RAN implementation |
| 32.422 | 0174 rev 1 | Align the Reporting Trigger parameter with the RAN implementation |
| 32.422 | 0175 | Clean-up Immediate MDT handling at handover |
| 32.422 | 0176 | Clean-up Immediate MDT handling at handover |
| 32.422 | 0179 | CR R10 32.422 Support multiple cells in area based MDT |
| 32.422 | 0180 | CR R11 32.422 Support multiple cells in area based MDT |
| 32.422 | 0181 | CR R10 32.422 Error handling correction |
| 32.422 | 0181 rev 1 | Error handling correction |
| 32.422 | 0182 | CR R11 32.422 Error handling correction |
| 32.422 | 0182 rev 1 | Error handling correction |
| 32.422 | 0183 | CR R10 32.422 Add TCE address for UTRAN MDT activation |
| 32.422 | 0183 rev 1 | CR R10 32.422 Add TCE address for UTRAN MDT activation |
| 32.422 | 0183 rev 2 | Add TCE address for UTRAN MDT activation |
| 32.422 | 0184 | CR R11 32.422 Add TCE address for UTRAN MDT activation |
| 32.422 | 0184 rev 1 | CR R11 32.422 Add TCE address for UTRAN MDT activation |
| 32.422 | 0184 rev 2 | Add TCE address for UTRAN MDT activation |
| 32.422 | 0185 | CR R10 clarify anonymization when jobtype is MDT+trace |
| 32.422 | 0185 rev 1 | CR R10 clarify anonymization when jobtype is MDT+trace |
| 32.422 | 0186 | CR R11 clarify anonymization when jobtype is MDT+trace |
| 32.422 | 0186 rev 1 | CR R11 clarify anonymization when jobtype is MDT+trace |
| 32.422 | 0187 | CR R10 32.422 Support multiple cells in area based MDT |
| 32.422 | 0187 rev 1 | Support multiple cells in area based MDT |
| 32.422 | 0188 | Support multiple cells in area based MDT |
| 32.422 | 0189 rev 1 | Clarify handling of anonymization when JobType is MDT+Trace - to align with RAN3 36.413 CR#0954 |
| 32.422 | 0190 rev 1 | Clarify handling of anonymization when JobType is MDT+Trace - to align with RAN3 36.413 CR#0954 CR R3-113117 |
| 32.422 | 0192 rev 1 | Aligning the MDT specification with RAN specifications TS 36.413 and TS 25.413 |
| 32.422 | 0193 rev 1 | Aligning the MDT specification with RAN specifications TS 36.413 and TS 25.413 |
| 32.422 | 0198 | CR 32.422 R10 Remove MDT Country Restriction |
| 32.422 | 0199 | CR 32.422 R11 Remove MDT Country Restriction |
| 32.422 | 0200 | CR 32.422 R10 Align MDT Reporting |
| 32.422 | 0201 | CR 32.422 R11 Align MDT Reporting |
| 32.422 | 0218 | Rel10 CR 32422 Correcting the missing event threshold parameters for the event 1F and event 1l reporting triggers |
| 32.422 | 0218 rev 1 | Rel10 CR 32422 Correcting the missing event threshold parameters for the event 1F and event 1l reporting triggers |
| 32.422 | 0218 rev 2 | Rel10 CR 32422 Correcting the missing event threshold parameters for the event 1F and event 1l reporting triggers |
| 32.422 | 0218 rev 3 | Correcting the missing event threshold parameters for the event 1F and event 1l reporting triggers |
| 32.422 | 0219 rev 3 | Correcting the missing event threshold parameters for the event 1F and event 1l reporting triggers |
| 32.422 | 0222 | Add combined Trace and Immediate MDT job type to the MDT parameters scope |
| 32.422 | 0223 | Add combined Trace and Immediate MDT job type to the MDT parameters scope |
| 32.422 | 0233 | CR R10 32.422 Correction of UMTS M2 reporting trigger configuration |
| 32.422 | 0233 rev 1 | Correction of UMTS M2 reporting trigger configuration |
| 32.422 | 0234 rev 1 | Correction of UMTS M2 reporting trigger configuration |
| 32.422 | 0239 | Add report amount applicability clarification |
| 32.422 | 0239 rev 1 | CR 32.422 R10 add report amount clarification |
| 32.422 | 0240 | Add report amount applicability clarification |
| 32.422 | 0246 | Clarify report interval parameter scope |
| 32.422 | 0247 | Clarify report interval parameter scope |
| 32.422 | 0258 | Align MDT Report Interval parameter |
| 32.423 | 0050 rev 1 | Applying trace data file to MDT data format |
| 32.423 | 0054 | Correcting the description of meas vendorSpecific attribute in the XML trace file |
| 32.423 | 0055 | CR R10 Correct IMSI retrieval file to include MDT anonymization info |
| 32.423 | 0055 rev 1 | CR R10 Correct IMSI retrieval file to include MDT anonymization info |
| 32.423 | 0056 | CR R11 Correct IMSI retrieval file to include MDT anonymization info |
| 32.423 | 0056 rev 1 | CR R11 Correct IMSI retrieval file to include MDT anonymization info |
| 32.423 | 0057 rev 1 | Correct IMSI retrieval file to include MDT anonymization info |
| 32.423 | 0058 rev 1 | Correct IMSI retrieval file to include MDT anonymization info |
| 32.441 | 0004 | Adding requirements for managing UE based network performance measurements |
| 32.441 | 0005 | Change UE based network performance measurements to MDT - Align cross-3GPP terminology on MDT work |
| 32.442 | 0004 | Adding Minimization of Drive Tests (MDT) to Trace IRP |
| 32.442 | 0004 rev 1 | CR R10 32.442 Adding area selection attribute to TraceJob |
| 32.442 | 0006 | CR R10 32.442 Add areascope parameter for MDT combination criteria |
| 32.442 | 0007 rev 1 | Add areascope parameter as a MDT configuration |
| 32.442 | 0014 | CR R10 32.442 Support multiple cells in area based MDT |
| 32.442 | 0014 rev 1 | CR R10 32.442 Support multiple cells in area based MDT |
| 32.442 | 0014 rev 2 | Support multiple cells in area based MDT |
| 32.442 | 0015 | CR R11 32.442 Support multiple cells in area based MDT |
| 32.442 | 0015 rev 1 | CR R11 32.442 Support multiple cells in area based MDT |
| 32.442 | 0015 rev 2 | Support multiple cells in area based MDT |
| 32.442 | 0016 | CR R10 32.442 Add TCE address for UTRAN MDT activation |
| 32.442 | 0016 rev 1 | CR R10 32.442 Add TCE address for UTRAN MDT activation |
| 32.442 | 0016 rev 2 | Add TCE address for UTRAN MDT activation |
| 32.442 | 0017 | CR R11 32.442 Add TCE address for UTRAN MDT activation |
| 32.442 | 0017 rev 1 | CR R11 32.442 Add TCE address for UTRAN MDT activation |
| 32.442 | 0017 rev 2 | Add TCE address for UTRAN MDT activation |
| 32.442 | 0019 rev 1 | Inconsistency correction on trace target - Align with 32.422 |
| 32.442 | 0020 rev 1 | Inconsistency correction on trace target -Align with 32.422 |
| 32.442 | 0214 | Rel-10 CR TS32.442 Alignment of the Anonymization parameter with TS 32.422 |
| 32.442 | 0215 | Rel-11 CR TS32.442 Alignment of the Anonymization parameter with TS 32.422 |
| 32.442 | 0218 | Rel10 CR 32442 Add missing threshold params for UMTS event triggered measurements |
| 32.442 | 0218 rev 1 | Add missing threshold parameter for UMTS event triggered measurements |
| 32.442 | 0219 rev 1 | Add missing threshold parameter for UMTS event triggered measurements |
| 32.442 | 0225 | CR R10 32.442 Correction of UMTS M2 reporting trigger configuration -Align with 32.422 |
| 32.442 | 0225 rev 1 | Correction of UMTS M2 reporting trigger configuration -Align with 32.422 |
| 32.442 | 0226 rev 1 | Correction of UMTS M2 reporting trigger configuration -Align with 32.422 |
| 32.446 | 0030 | CR R10 32.446 extend traceIRP operation to support MDT configuration |
| 32.446 | 0030 rev 1 | Extend TraceIRP operation to support MDT configuration - Align with 32.442 |
| 32.446 | 0031 rev 1 | Add areascope parameter as a MDT configuration |
| 32.446 | 0034 | Support multiple cells in area based MDT |
| 32.446 | 0035 | Support multiple cells in area based MDT |
| 32.446 | 0037 | Inconsistency correction on trace target -Align with 32.442 IS version number |
| 32.446 | 0038 | Inconsistency correction on trace target -Align with 32.442 IS version number |
| 32.446 | 0040 | Rel-10 CR TS32.446 Alignment of the Anonymization parameter with TS 32.422 |
| 32.446 | 0041 | Rel-11 CR TS32.446 Alignment of the Anonymization parameter with TS 32.422 |
| 32.446 | 0046 | Add missing threshold parameter for UMTS event triggered measurements |
| 32.446 | 0047 | Add missing threshold parameter for UMTS event triggered measurements |
| 32.446 | 0050 | Correction of UMTS M2 reporting trigger configuration -Align with 32.442 |
| 32.446 | 0051 rev 1 | Correction of UMTS M2 reporting trigger configuration |
| 32.642 | 0066 | R10 CR 32642 Adding TCE address and TCE ID mapping information to RNCFunction |
| 32.642 | 0066 rev 1 | Adding TCE address and TCE ID mapping information to RNCFunction |
| 32.646 | 0011 | R10 CR to 32646-a20 adding TCE address to RNCFunction |
| 32.646 | 0012 | R10 CR 32646 Adding TCE address and TCE ID mapping information to RNCFunction |
| 32.646 | 0012 rev 1 | Adding TCE address and TCE ID mapping information to RNCFunction |
| 32.762 | 0062 | R10 CR 32762 Adding TCE address and TCE ID mapping information to eNB Function |
| 32.762 | 0062 rev 1 | Adding TCE address and TCE ID mapping information to ENBFunction |
| 32.766 | 0020 | R10 CR 32766 Adding TCE address and TCE ID mapping information to eNB Function |
| 32.766 | 0020 rev 1 | Adding TCE address and TCE ID mapping information to ENBFunction |
| 32.766 | 0029 rev 1 | Adding TCE address and TCE ID mapping information to ENBFunction |
page generated from database: 2024-04-28 19:33:05