3GPP Work Item mapping to Change Requests
3GPP Work Item = 370037 (RANimp-UplinkEnhState)
This page lists the approved Change Requests to 3GPP Technical Specifications and Reports associated with the above work item. Click on the CR find it in the CR table associated with the spec to which it pertains. Click on the spec to open its web page.
| Spec | CR number and Revision | CR Title |
|---|---|---|
| 25.101 | 0622 | Minimum requirement on the detection of E-AI |
| 25.101 | 0640 | Introduction of E-AI requirements |
| 25.101 | 0640 rev 1 | Introduction of E-AI requirements |
| 25.133 | 0931 | Uplink Power Headroom definition for E-DCH in CELL_FACH |
| 25.133 | 0938 | Uplink Power Headroom Definition for EUL in CELL_FACH |
| 25.133 | 0942 | Performance requirements for mobility for Enhanced Uplink for CELL_FACH state and Enhanced UE DRX |
| 25.133 | 0947 | Performance requirements for mobility for Enhanced Uplink for CELL_FACH state and Enhanced UE DRX |
| 25.133 | 0947 rev 1 | Performance requirements for mobility for Enhanced Uplink for CELL_FACH state and Enhanced UE DRX |
| 25.133 | 0948 | Uplink Power Headroom Definition for EUL in CELL_FACH |
| 25.133 | 0952 | Initial E-TFC restriction for enhanced uplink in cell FACH |
| 25.133 | 0959 | Uplink power headroom definition for EUL in CELL_FACH |
| 25.133 | 0974 | Initial E-TFC restriction for enhanced uplink in cell FACH |
| 25.133 | 0982 | Correction of initial E-TFC restriction for E-DCH in CELL_FACH state and Idle mode (Technically Endorsed in R4-50bis: R4-091052) |
| 25.211 | 0256 rev 1 | Introduction of the Enhanced Uplink for CELL_FACH state |
| 25.211 | 0256 rev 2 | Introduction of the Enhanced Uplink for CELL_FACH state |
| 25.211 | 0259 rev 1 | Removal of a reference to E-AICH |
| 25.211 | 0268 | Clarification on STTD encoding description for AICH |
| 25.211 | 0302 | Removal of the relative amplitude weighting factor between EAI and AI |
| 25.211 | 0305 | Removal of the relative amplitude weighting factor between EAI and AI |
| 25.211 | 0305 rev 1 | Removal of the relative amplitude weighting factor between EAI and AI |
| 25.212 | 0490 rev 1 | Introduction of the Enhanced Uplink for CELL_FACH state |
| 25.214 | 0490 | Introduction of the Enhanced Uplink for CELL_FACH state |
| 25.214 | 0490 rev 1 | |
| 25.214 | 0504 rev 1 | Corrections in the physical random access procedure for Enhanced Uplink in CELL_FACH State and Idle mode |
| 25.214 | 0513 | Support of HS-DPCCH for Enhanced uplink in CELL_FACH state |
| 25.214 | 0654 rev 1 | Clarification of when to use Sync A procedure when UE transitions from CELL_FACH to CELL_DCH |
| 25.214 | 0655 | Clarification of when to use Sync A procedure when UE transitions from CELL_FACH to CELL_DCH |
| 25.214 | 0656 | Clarification of when to use Sync A procedure when UE transitions from CELL_FACH to CELL_DCH |
| 25.214 | 0666 | Further Clarification of when to use Sync A procedure when UE transitions from CELL_FACH to CELL_DCH |
| 25.214 | 0667 | Further Clarification of when to use Sync A procedure when UE transitions from CELL_FACH to CELL_DCH |
| 25.214 | 0668 | Further Clarification of when to use Sync A procedure when UE transitions from CELL_FACH to CELL_DCH |
| 25.214 | 0671 | Further Clarification of when to use Sync A procedure when UE transitions from CELL_FACH to CELL_DCH |
| 25.215 | 0189 | UPH measurement support for Enhanced Uplink for CELL_FACH state |
| 25.301 | 0097 | Introduction of Uplink Enhanced CELL_FACH in 25.301 |
| 25.301 | 0102 | Correction of Protocol termination points for E-DCH for CCCH(R8) |
| 25.301 | 0103 | Correction of Protocol termination points for E-DCH for CCCH(R9) |
| 25.302 | 0183 | Introduction of Enhanced Uplink in CELL_FACH in 25.302 |
| 25.302 | 0184 rev 1 | Replacement of E-AICH in 25.302 |
| 25.304 | 0176 rev 2 | Triggering of cell reselection in Cell_FACH |
| 25.304 | 0259 rev 1 | Triggering of absolute priority based reselection while common E-DCH allocated |
| 25.304 | 0260 rev 1 | Triggering of absolute priority based reselection while common E-DCH allocated |
| 25.306 | 0201 rev 2 | Introduction of support of “Enhanced Uplink for CELL_FACH State in FDD” and “Improved L2 for uplink” |
| 25.308 | 0051 rev 1 | Addition of HS-DPCCH feedback in CELL_FACH state |
| 25.319 | 0022 rev 1 | Introduction of Enhanced Uplink in CELL_FACH in 25.319 |
| 25.319 | 0023 | Some clarifications and closing of open issues left for Enhanced Uplink in CELL_FACH |
| 25.319 | 0026 rev 1 | Clarification of common E-DCH resource usage in 25.319 |
| 25.319 | 0027 | Update of stage 2 description for Enhanced Uplink for CELL_FACH State and Idle mode in FDD |
| 25.319 | 0058 | Error Detection instead of error correction in Enhanced Uplink in CELL_FACH |
| 25.319 | 0059 | Error Detection instead of error correction in Enhanced Uplink in CELL_FACH |
| 25.319 | 0065 | Corrections to CRC attachment entity in MAC-i/is |
| 25.319 | 0066 | Corrections to CRC attachment entity in MAC-i/is |
| 25.319 | 0067 | Corrections to CRC attachment entity in MAC-i/is |
| 25.319 | 0075 | Clarification of 16QAM support for Enhanced Uplink in CELL_FACH state and Idle mode |
| 25.319 | 0076 | Clarification of 16QAM support for Enhanced Uplink in CELL_FACH state and Idle mode |
| 25.319 | 0077 | Clarification of 16QAM support for Enhanced Uplink in CELL_FACH state and Idle mode |
| 25.319 | 0102 | Clarification of F-DPCH with STTD in CELL_FACH |
| 25.319 | 0133 | |
| 25.321 | 0430 rev 1 | Introduction of Enhanced Uplink in CELL_FACH state and Idle mode in 25.321 |
| 25.321 | 0449 | Resource release after collision resolution failure |
| 25.321 | 0452 rev 1 | Replacement of E-AICH in 25.321 |
| 25.321 | 0458 | Correction to the segmentation status field |
| 25.321 | 0459 | HARQ feedback with Enhanced Uplink in Cell_FACH state |
| 25.321 | 0460 | Clarification of common E-DCH resource usage in 25.321 |
| 25.321 | 0468 rev 1 | CRC attachment point for MAC-is when transmitting MAC-c PDU |
| 25.321 | 0471 | Clarification on SI transmission for CCCH in CELL_FACH state and idle mode |
| 25.321 | 0472 | Correction to E-TFC selection in CELL_FACH |
| 25.321 | 0492 rev 1 | Setting of initial serving grant value for common E-DCH transmission |
| 25.321 | 0505 | Proposed to HARQ delivery failure for triggered scheduling information for CELL_FACH state and Idle mode |
| 25.321 | 0509 rev 1 | Correction on adding CMAC_STATUS in figure 11.2.2A-3 |
| 25.321 | 0511 rev 1 | HARQ delivery correction |
| 25.321 | 0517 | MAC-STATUS-Ind for CCCH transmissions |
| 25.321 | 0527 | Corrections to Enhanced Uplink procedure in CELL_FACH state and Idle mode for FDD |
| 25.321 | 0530 | Enhanced Uplink in CELL_FACH and Idle mode: ACK/NACK for BCCH and max. CCH resource allocation start time. |
| 25.321 | 0551 rev 1 | Corrections to Enhanced Uplink in CELL_FACH state and Idle mode |
| 25.321 | 0557 | Scheduling method in CELL_FACH state |
| 25.321 | 0618 | Error Detection instead of error correction in Enhanced Uplink in CELL_FACH |
| 25.321 | 0619 | Error Detection instead of error correction in Enhanced Uplink in CELL_FACH |
| 25.321 | 0625 | Start of timer for contention resolution |
| 25.321 | 0626 | Start of timer for contention resolution |
| 25.321 | 0647 | Corrections to MAC-i/is |
| 25.321 | 0648 | Corrections to MAC-i/is |
| 25.321 | 0650 | Scheduling Information transmission for Enhanced CELL_FACH |
| 25.321 | 0651 | Scheduling Information transmission for Enhanced CELL_FACH |
| 25.321 | 0652 | Clarification of UE Id handling after collision resolution |
| 25.321 | 0653 | Clarification of UE Id handling after collision resolution |
| 25.321 | 0685 | Clarification on the use of timer T2 in Enhanced Uplink in CELL_FACH state and Idle mode for FDD |
| 25.321 | 0686 | Clarification on the use of timer T2 in Enhanced Uplink in CELL_FACH state and Idle mode for FDD |
| 25.321 | 0699 rev 1 | Corrections for Enhanced Uplink in CELL_FACH state and idle mode |
| 25.321 | 0700 rev 1 | Corrections for Enhanced Uplink in CELL_FACH state and idle mode |
| 25.321 | 0708 | Correction in release of common E-DCH resources |
| 25.321 | 0709 | Correction in release of common E-DCH resources |
| 25.321 | 0710 | Correction in release of common E-DCH resources |
| 25.321 | 0737 rev 1 | Scheduling Information corrections for CELL_FACH and Idle mode |
| 25.321 | 0738 rev 1 | Scheduling Information corrections for CELL_FACH and Idle mode |
| 25.321 | 0739 rev 1 | Scheduling Information corrections for CELL_FACH and Idle mode |
| 25.321 | 0755 | SI attachment during DCCH/DTCH EUL transmission in CELL_FACH state |
| 25.321 | 0756 | SI attachment during DCCH/DTCH EUL transmission in CELL_FACH state |
| 25.321 | 0757 | SI attachment during DCCH/DTCH EUL transmission in CELL_FACH state |
| 25.321 | 0758 | SI attachment during DCCH/DTCH EUL transmission in CELL_FACH state |
| 25.321 | 0759 | Total E-DCH buffer size in case of CCCH transmission |
| 25.321 | 0760 | Total E-DCH buffer size in case of CCCH transmission |
| 25.321 | 0761 | Total E-DCH buffer size in case of CCCH transmission |
| 25.321 | 0762 | Total E-DCH buffer size in case of CCCH transmission |
| 25.321 | 0776 | Clarification of CRC parity bits appended to MAC-c PDUs |
| 25.321 | 0777 | Clarification of CRC parity bits appended to MAC-c PDUs |
| 25.321 | 0778 | Clarification of CRC parity bits appended to MAC-c PDUs |
| 25.321 | 0779 | Clarification of CRC parity bits appended to MAC-c PDUs |
| 25.321 | 0780 | Clarification for standalone periodic SI when TEBS=0 |
| 25.321 | 0781 | Clarification for standalone periodic SI when TEBS=0 |
| 25.321 | 0782 | Clarification for standalone periodic SI when TEBS=0 |
| 25.321 | 0783 | Clarification for standalone periodic SI when TEBS=0 |
| 25.331 | 3387 rev 3 | Introduction of Enhanced Uplink in CELL_FACH in 25.331 |
| 25.331 | 3414 | HARQ feedback with Enhanced Uplink in Cell_FACH state |
| 25.331 | 3422 rev 1 | Replacement of E-AICH in 25.331 |
| 25.331 | 3425 rev 2 | Reseting the periodic cell update timer T305 after autonomous state transition to CELL_FACH in Enhanced Uplink in CELL_FACH state |
| 25.331 | 3426 rev 1 | Clarification of common E-DCH resource usage in 25.331 |
| 25.331 | 3427 rev 1 | Corrections for Enhanced Uplink in CELL_FACH in 25.331 |
| 25.331 | 3445 rev 1 | SIB7 reading time with Enhanced Uplink for CELL_FACH state in 25.331 |
| 25.331 | 3447 | Clarification of HS-DPCCH usage for Enhanced Uplink in CELL_FACH |
| 25.331 | 3546 rev 1 | Clarification of ACK/NACK reporting for Enhanced Uplink in CELL_FACH |
| 25.331 | 3550 | Addition of E-RNTI and H-RNTI in URA UPDATE CONFIRM message |
| 25.331 | 3566 rev 1 | Removal of redundant Cell Update procedure |
| 25.331 | 3618 | Correction on F-DPCH slot format for E-DCH in CELL_FACH |
| 25.331 | 3650 | Corrections to common E-DCH operation |
| 25.331 | 3684 | Configuration of EAI power offset |
| 25.331 | 3695 | Clarification of SIB7 reading for enhanced uplink in CELL_FACH state |
| 25.331 | 3722 | Inconsistency with ASN.1 for TVM for Enhanced UL for CELL_FACH |
| 25.331 | 3830 rev 2 | Clarification of common E-DCH mac-d flow for CCCH transmission |
| 25.331 | 3831 rev 2 | Clarification of common E-DCH mac-d flow for CCCH transmission |
| 25.331 | 3897 | Clarification on the transmission of MAC-c PDUs (R8) |
| 25.331 | 3898 | Clarification on the transmission of MAC-c PDUs (R9) |
| 25.331 | 4006 | Common E-DCH MAC-d flow List ASN.1 definition correction |
| 25.331 | 4007 | Common E-DCH MAC-d flow List ASN.1 definition correction |
| 25.331 | 4082 rev 1 | Correction of RNTIs handling for Enhanced Uplink in CELL_FACH |
| 25.331 | 4083 rev 1 | Correction of RNTIs handling for Enhanced Uplink in CELL_FACH |
| 25.331 | 4125 | Clarification of Tx interruption after trigger handling for Enhanced Uplink in CELL_FACH state and Idle mode |
| 25.331 | 4126 | Clarification of Tx interruption after trigger handling for Enhanced Uplink in CELL_FACH state and Idle mode |
| 25.331 | 4335 | Correction on actions related to HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4336 | Correction on actions related to HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4337 | Correction on actions related to HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4340 | Correction on READY_FOR_COMMON_EDCH definition |
| 25.331 | 4341 | Correction on READY_FOR_COMMON_EDCH definition |
| 25.331 | 4342 | Correction on READY_FOR_COMMON_EDCH definition |
| 25.331 | 4384 rev 3 | SIB5 changes for E-DCH in CELL_FACH and Idle Mode |
| 25.331 | 4385 rev 3 | SIB5 changes for E-DCH in CELL_FACH and Idle Mode |
| 25.331 | 4386 rev 3 | SIB5 changes for E-DCH in CELL_FACH and Idle Mode |
| 25.331 | 4395 | RRC procedure performance requirements for Enhanced Uplink in CELL_FACH |
| 25.331 | 4396 | RRC procedure performance requirements for Enhanced Uplink in CELL_FACH |
| 25.331 | 4397 | RRC procedure performance requirements for Enhanced Uplink in CELL_FACH |
| 25.331 | 4404 | Correction of HSPA_RNTI_STORED_CELL_PCH handling |
| 25.331 | 4405 | Correction of HSPA_RNTI_STORED_CELL_PCH handling |
| 25.331 | 4406 | Correction of HSPA_RNTI_STORED_CELL_PCH handling |
| 25.331 | 4432 rev 2 | Further corrections on actions related to HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4433 rev 2 | Further corrections on actions related to HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4434 rev 2 | Further corrections on actions related to HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4435 | Change in the radio bearer mapping due to a system info message |
| 25.331 | 4436 | Change in the radio bearer mapping due to a system info message |
| 25.331 | 4437 | Change in the radio bearer mapping due to a system info message |
| 25.331 | 4442 | Correction of RB mapping option selection for HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4443 | Correction of RB mapping option selection for HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4444 | Correction of RB mapping option selection for HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4599 rev 1 | Further clarification on UE behavior during state transition from CELL_PCH/URA_PCH to CELL_FACH |
| 25.331 | 4600 rev 1 | Further clarification on UE behavior during state transition from CELL_PCH/URA_PCH to CELL_FACH |
| 25.331 | 4601 rev 1 | Further clarification on UE behavior during state transition from CELL_PCH/URA_PCH to CELL_FACH |
| 25.331 | 4655 rev 1 | Correction to SIB5/5bis and SIB6 handle for Enhanced Uplink |
| 25.331 | 4656 rev 1 | Correction to SIB5/5bis and SIB6 handle for Enhanced Uplink |
| 25.331 | 4657 rev 1 | Correction to SIB5/5bis and SIB6 handle for Enhanced Uplink |
| 25.331 | 4729 rev 2 | Clarification on Uplink DPCH power control info for Common E-DCH |
| 25.331 | 4730 rev 2 | Clarification on Uplink DPCH power control info for Common E-DCH |
| 25.331 | 4731 rev 2 | Clarification on Uplink DPCH power control info for Common E-DCH |
| 25.331 | 4773 | Use of New E-RNTI in UMI message |
| 25.331 | 4774 | Use of New E-RNTI in UMI message |
| 25.331 | 4775 | Use of New E-RNTI in UMI message |
| 25.331 | 4932 | Clarifications of the UE behaviours when initiating a cell update procedure |
| 25.331 | 4933 | Clarifications of the UE behaviours when initiating a cell update procedure |
| 25.331 | 4934 | Clarifications of the UE behaviours when initiating a cell update procedure |
| 25.331 | 4935 | Clarifications of the UE behaviours when initiating a cell update procedure |
| 25.331 | 4964 | Corrections regarding the UE behaviour on evaluating the variable HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4965 | Corrections regarding the UE behaviour on evaluating the variable HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4966 | Corrections regarding the UE behaviour on evaluating the variable HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 4967 | Corrections regarding the UE behaviour on evaluating the variable HSPA_RNTI_STORED_CELL_PCH |
| 25.331 | 5276 | Corrections of the UE behavior when variable E_RNTI is not set in CELL_PCH state |
| 25.331 | 5277 | Corrections of the UE behavior when variable E_RNTI is not set in CELL_PCH state |
| 25.331 | 5278 | Corrections of the UE behavior when variable E_RNTI is not set in CELL_PCH state |
| 25.331 | 5279 | Corrections of the UE behavior when variable E_RNTI is not set in CELL_PCH state |
| 25.331 | 5293 | CR to 25.331 on PRACH preamble control parameters for Enhanced Uplink (R8) |
| 25.331 | 5294 | CR to 25.331 on PRACH preamble control parameters for Enhanced Uplink (R9) |
| 25.331 | 5295 | CR to 25.331 on PRACH preamble control parameters for Enhanced Uplink (R10) |
| 25.331 | 5296 | CR to 25.331 on PRACH preamble control parameters for Enhanced Uplink (R11) |
| 25.331 | 5296 rev 1 | CR to 25.331 on PRACH preamble control parameters for Enhanced Uplink (R11) |
| 25.331 | 5297 | Clarification to RRC padding for CCCH transmission in case of EUL FACH |
| 25.331 | 5297 rev 1 | Clarification to RRC padding for CCCH transmission in case of EUL FACH |
| 25.331 | 5298 | Clarification to RRC padding for CCCH transmission in case of EUL FACH |
| 25.331 | 5298 rev 1 | Clarification to RRC padding for CCCH transmission in case of EUL FACH |
| 25.331 | 5299 | Clarification to RRC padding for CCCH transmission in case of EUL FACH |
| 25.331 | 5299 rev 1 | Clarification to RRC padding for CCCH transmission in case of EUL FACH |
| 25.331 | 5300 | Clarification to RRC padding for CCCH transmission in case of EUL FACH |
| 25.331 | 5300 rev 1 | Clarification to RRC padding for CCCH transmission in case of EUL FACH |
| 25.331 | 5320 | Correction of UE behavior when variable E_RNTI is not set in CELL_PCH |
| 25.331 | 5321 | Corrections of the UE behavior when variable E_RNTI is not set in CELL_PCH state |
| 25.331 | 5322 | Corrections of the UE behavior when variable E_RNTI is not set in CELL_PCH state |
| 25.331 | 5323 | Corrections of the UE behavior when variable E_RNTI is not set in CELL_PCH state |
| 25.331 | 5333 | UE behavior at activation and deactivation of Enhanced Uplink in CELL_FACH state in SIB5/5bis |
| 25.331 | 5334 | UE behavior at activation and deactivation of Enhanced Uplink in CELL_FACH state in SIB5/5bis |
| 25.331 | 5335 | UE behavior at activation and deactivation of Enhanced Uplink in CELL_FACH state in SIB5/5bis |
| 25.331 | 5352 | Clarification on available signature ordering in common E-DCH |
| 25.331 | 5362 | Clarification of the IE 'Scheduled Transmission configuration' in Enhanced Uplink in CELL_FACH state |
| 25.331 | 5368 | Clarification on available signature ordering in common E-DCH |
| 25.331 | 5369 | Clarification on available signature ordering in common E-DCH |
| 25.331 | 5370 | Clarification on available signature ordering in common E-DCH |
| 25.331 | 5470 | Applying MAC-hs/ehs reset for state transition |
| 25.331 | 5470 rev 1 | Applying MAC-hs/ehs reset for state transition |
| 25.331 | 5471 rev 1 | Applying MAC-hs/ehs reset for state transition |
| 25.331 | 5472 | Applying MAC-hs/ehs reset for state transition |
| 25.331 | 5472 rev 1 | Applying MAC-hs/ehs reset for state transition |
| 25.331 | 5632 | |
| 25.331 | 5633 | |
| 25.331 | 5634 | |
| 25.331 | 5635 | |
| 25.331 | 5684 | |
| 25.331 | 5688 | |
| 25.331 | 5688 rev 1 | |
| 25.331 | 5709 | |
| 25.331 | 5710 | |
| 25.331 | 5885 | |
| 25.331 | 5885 rev 1 | |
| 25.331 | 5885 rev 2 | |
| 25.331 | 5906 | |
| 25.331 | 5906 rev 1 | |
| 25.331 | 5907 | |
| 25.331 | 5907 rev 1 | |
| 25.331 | 5916 | |
| 25.331 | 5917 | |
| 25.401 | 0123 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.423 | 1400 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.423 | 1400 rev 1 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.423 | 1400 rev 2 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.423 | 1420 | Correction on procedural text for Enhanced Uplink in Cell_FACH |
| 25.423 | 1577 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.423 | 1577 rev 1 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.423 | 1582 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.423 | 1582 rev 1 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.425 | 0129 | Introduction of frame formats supporting E-DCH for CELL_FACH and Idle over Iur |
| 25.425 | 0129 rev 1 | Introduction of frame formats supporting E-DCH for CELL_FACH and Idle over Iur |
| 25.425 | 0130 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.425 | 0137 | Corrections to IE definitions for E-DCH DATA FRAME and Definitions chapter |
| 25.425 | 0145 | Correction on value range for Number of MAC-is SDU in frame |
| 25.433 | 1492 | Max Transport Block Size limit for EUL in CELL_FACH Ues |
| 25.433 | 1537 | Max Transport Block Size limits for EUL in CELL_FACH Ues |
| 25.433 | 1539 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.433 | 1539 rev 1 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.433 | 1539 rev 2 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.433 | 1545 | New NBAP Measurement on Common E-DCH Resource Usage |
| 25.433 | 1545 rev 1 | New NBAP Measurement on Common E-DCH Resource Usage |
| 25.433 | 1545 rev 2 | New NBAP Measurement on Common E-DCH Resource Usage |
| 25.433 | 1545 rev 3 | New NBAP Measurement on Common E-DCH Resource Usage |
| 25.433 | 1557 | Some corrections for common E-DCH |
| 25.433 | 1558 | Adding Common E-DCH implicit release indicator IE into NBAP message |
| 25.433 | 1564 | E-RNTI in RL Setup Request |
| 25.433 | 1564 rev 1 | E-RNTI in RL Setup Request |
| 25.433 | 1565 | Introduction of two RRC IEs for Enhanced Uplink in Cell_FACH |
| 25.433 | 1596 | Clean up: FDD Enhanced Uplink in Cell_FACH |
| 25.433 | 1596 rev 1 | Clean up: FDD Enhanced Uplink in Cell_FACH |
| 25.433 | 1596 rev 2 | Clean up: FDD Enhanced Uplink in Cell_FACH |
| 25.433 | 1597 | HS-DPCCH Capability for Enhanced Uplink in Cell_FACH |
| 25.433 | 1597 rev 1 | HS-DPCCH Capability for Enhanced Uplink in Cell_FACH |
| 25.433 | 1597 rev 2 | HS-DPCCH Capability for Enhanced Uplink in Cell_FACH |
| 25.433 | 1655 | Update of description for UE Status Update Procedure |
| 25.433 | 1656 | Addition of Semantics Description for E-DCH RACH Report Information in Common Measurement Value |
| 25.433 | 1677 | Clarification of DPC mode configuration for common E-DCH |
| 25.433 | 1678 | Clarification of DPC mode configuration for common E-DCH |
| 25.433 | 1717 | Introduction of E-RNTI in RL Information in RL Setup Request |
| 25.433 | 1718 | Introduction of E-RNTI in RL Information in RL Setup Request |
| 25.433 | 1734 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.433 | 1734 rev 1 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.433 | 1734 rev 2 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.433 | 1739 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.433 | 1739 rev 1 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.433 | 1739 rev 2 | E-RNTI Allocation for UE moves to Cell_FACH from Cell_DCH |
| 25.433 | 1768 | Clarification of common E-DCH mac-d flow for CCCH transmission |
| 25.433 | 1769 | Clarification of common E-DCH mac-d flow for CCCH transmission |
| 25.433 | 1779 | Addition of F-DPCH TX Power info in Common E-DCH System Information |
| 25.433 | 1779 rev 1 | Addition of F-DPCH TX Power info in Common E-DCH System Information |
| 25.433 | 1780 | Addition of F-DPCH TX Power info in Common E-DCH System Information |
| 25.433 | 1780 rev 1 | Addition of F-DPCH TX Power info in Common E-DCH System Information |
| 25.433 | 1784 | Removal of procedural text for DPC Mode IE in Common E-DCH System Information |
| 25.433 | 1784 rev 1 | Removal of procedural text for DPC Mode IE in Common E-DCH System Information |
| 25.433 | 1784 rev 2 | Removal of procedural text for DPC Mode IE in Common E-DCH System Information |
| 25.433 | 1784 rev 3 | Removal of procedural text for DPC Mode IE in Common E-DCH System Information |
| 25.433 | 1785 | Removal of procedural text for DPC Mode IE in Common E-DCH System Information |
| 25.433 | 1785 rev 1 | Removal of procedural text for DPC Mode IE in Common E-DCH System Information |
| 25.433 | 1861 | Changed values for a sub-IE in Common E-DCH Information for E-DCH IE |
| 25.433 | 1862 | Changed values for a sub-IE in Common E-DCH Information for E-DCH IE |
| 25.433 | 1867 | Inclusion of Additional E-DCH Transmission Back Off in Common E-DCH Information |
| 25.433 | 1868 | Inclusion of Additional E-DCH Transmission Back Off in Common E-DCH Information |
| 25.433 | 1879 | Clarification on Measurement Filter Coefficient used for E-DCH RACH Report |
| 25.433 | 1880 | Clarification on Measurement Filter Coefficient used for E-DCH RACH Report |
| 25.433 | 1964 | Correction to DL control channel power control for E-DCH in Cell_FACH |
| 25.433 | 1965 | Correction to DL control channel power control for E-DCH in Cell_FACH |
| 25.433 | 1966 | Correction to DL control channel power control for E-DCH in Cell_FACH |
| 25.433 | 1967 | Correction to DL control channel power control for E-DCH in Cell_FACH |
| 25.435 | 0186 | Introduction of frame formats supporting E-DCH for CELL_FACH and Idle over Iub |
| 25.435 | 0187 | Introduction of Enhanced Uplink in Cell_FACH |
| 25.435 | 0192 | Corrections to IE definitions for E-DCH DATA FRAME and Common MAC flow |
| 25.435 | 0211 | Silent Mode for Common E-DCH |
| 25.435 | 0212 | Correction on value range for Number of MAC-is SDU in frame |
| 25.435 | 0251 | Correction of propagation delay handling for E-DCH Data Frame |
page generated from database: 2024-05-06 06:38:32