The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R3-13 - 2000-05-22 to 2000-05-26, Kapolei

meeting id: R3-13 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R3‑001259 - - -
R3‑001260 - - -
R3‑001261 - - -
R3‑001262 Clarification on the Combining Control field: Update to R3-001209 - -
R3‑001263 - - -
R3‑001264 - - -
R3‑001265 - - -
R3‑001266 - - -
R3‑001267 - - -
R3‑001268 Clarification that basid Per is used - -
R3‑001269 Clarification that basic Per is used - -
R3‑001270 - - -
R3‑001271 - - -
R3‑001272 - - -
R3‑001273 Handling of presence field - -
R3‑001274 Handling of presence field - -
R3‑001275 Handling of presence field - -
R3‑001276 Basic protocol robustness - -
R3‑001277 Basic protocol robustness - -
R3‑001278 Granularity of Max DL power capability/transmission power - -
R3‑001279 - - -
R3‑001280 - - -
R3‑001281 - - -
R3‑001282 Addition of DL TPC step sizes - -
R3‑001283 Addition of DL TPC step sizes - -
R3‑001284 Correction of reference handling and some other editorial issues - -
R3‑001285 - - -
R3‑001286 Addition of protocol version - -
R3‑001287 Addition of protocol version - -
R3‑001288 Addition of protocol version - -
R3‑001289 Scheduling of SDU delivery from DRNC - -
R3‑001290 - - -
R3‑001291 - - -
R3‑001292 - - -
R3‑001293 Clarification of the correspondence of the Cell SFN to the CFN indicated in the PCH frame. - -
R3‑001294 - - -
R3‑001295 - - -
R3‑001296 Selection of secondary S-CCPCH in RNSAP - -
R3‑001297 Clarification of notations used in NBAP - -
R3‑001298 Clarification of notations used in RNSAP - -
R3‑001299 Clarification of notations used in RANAP - -
R3‑001300 Definition Node B and CRNC communication contexts - -
R3‑001301 - - -
R3‑001302 Crossing signalling between the Physical Channel Reconfiguration procedure and other procedures. - -
R3‑001303 Mismatch between measurement type and object - -
R3‑001304 - - -
R3‑001305 Clarification of Common measurement object IE - -
R3‑001306 Remocal of the DedicatedMeasurement Type - -
R3‑001307 - - -
R3‑001308 - - -
R3‑001309 AICH Transmissing Timing IE corrections - -
R3‑001310 Message type IE corrections - -
R3‑001311 RACH Slot format IE mismatch - -
R3‑001312 RL Set info in Dedicated measurement initiation request - -
R3‑001313 - - -
R3‑001314 Introduction of first RLS indicator - -
R3‑001315 - - -
R3‑001317 - - -
R3‑001318 - - -
R3‑001319 Editorial correction for RNSAP - -
R3‑001320 (ASN.1) Error Indication and Private message for common procedure - -
R3‑001321 Addition criticality information to the CHOICE tags(RNSAP) - -
R3‑001322 - - -
R3‑001323 - - -
R3‑001324 - - -
R3‑001325 - - -
R3‑001326 - - -
R3‑001327 - - -
R3‑001328 - - -
R3‑001329 - - -
R3‑001330 - - -
R3‑001331 - - -
R3‑001332 - - -
R3‑001333 - - -
R3‑001334 - - -
R3‑001335 - - -
R3‑001336 - - -
R3‑001337 Correction of tabular format - -
R3‑001338 - - -
R3‑001339 - - -
R3‑001340 - - -
R3‑001341 - - -
R3‑001342 - - -
R3‑001343 - - -
R3‑001344 - - -
R3‑001348 - - -
R3‑001349 - - -
R3‑001350 Clarification of Radio Link Reconfiguration with CCTrCH and DPCH deletion in TDD - -
R3‑001351 Clarification of Radio Link Reconfiguration with CCTrCH and DPCH deletion in TDD - -
R3‑001352 - - -
R3‑001353 - - -
R3‑001354 Correction of Common resources in Node B - -
R3‑001355 - - -
R3‑001356 - - -
R3‑001357 - - -
R3‑001358 - - -
R3‑001359 Measurement periods and accuracy for TDD - -
R3‑001360 Measurement periods and accuracy for TDD - -
R3‑001361 - - -
R3‑001362 Add Block STTD Indicator to TDD Neighbouring Cell Information - -
R3‑001363 - - -
R3‑001364 - - -
R3‑001365 - - -
R3‑001366 - - -
R3‑001367 - - -
R3‑001368 - - -
R3‑001369 - - -
R3‑001370 - - -
R3‑001371 - - -
R3‑001372 - - -
R3‑001373 - - -
R3‑001374 - - -
R3‑001375 - - -
R3‑001376 - - -
R3‑001377 - - -
R3‑001378 - - -
R3‑001379 - - -
R3‑001380 - - -
R3‑001381 Correction of STTD Indicator IE - -
R3‑001382 - - -
R3‑001383 - - -
R3‑001384 - - -
R3‑001385 Alignment of Diversity Indication IE between tabular format and ASN.1 - -
R3‑001386 Rapporteur update to RNSAP symbol update - -
R3‑001387 - - -
R3‑001388 - - -
R3‑001389 - - -
R3‑001390 - - -
R3‑001391 - - -
R3‑001392 - - -
R3‑001393 - - -
R3‑001394 - - -
R3‑001395 - - -
R3‑001396 - - -
R3‑001397 - - -
R3‑001398 Tx diversity indicator in neighboring cell information - -
R3‑001399 - - -
R3‑001400 - - -
R3‑001401 - - -
R3‑001402 - - -
R3‑001403 - - -
R3‑001404 - - -
R3‑001405 - - -
R3‑001406 - - -
R3‑001407 - - -
R3‑001408 - - -
R3‑001409 - - -
R3‑001410 Clarification that Basic PER is used - -
R3‑001411 - - -
R3‑001412 New text for RAB Assignment misplaced - -
R3‑001413 No priority from CN for Security Algorithms - -
R3‑001414 - - -
R3‑001415 Updating the RFC 1483 to RFC 2684 - -
R3‑001416 CRC of Frame Payload Part - -
R3‑001417 RFC set for Initialisation - -
R3‑001418 Figures with spare extension - -
R3‑001419 Editorial corrections for RNSAP (IEs) - -
R3‑001420 Editorial corrections for NBAP (IEs) - -
r3‑001421 - - -
r3‑001422 - - -
r3‑001425 - - -
R3‑001427 - - -
R3‑001428 - - -
R3‑001429 - - -
R3‑001430 Definition of the Relation between the Tabular Format and ASN.1 in RANAP - -
R3‑001431 Definition of the Relation between the Tabular Format and ASN.1 in RNSAP - -
R3‑001432 Definition of the Relation between the Tabular Format and ASN.1 in NBAP - -
R3‑001433 - - -
R3‑001434 - - -
R3‑001435 - - -
R3‑001436 - - -
R3‑001437 - - -
R3‑001438 - - -
R3‑001439 - - -
R3‑001440 - - -
R3‑001441 - - -
R3‑001442 Alignment of clause 7with clause 6 - -
R3‑001443 Edirotial Correction to the maxSDU-size in RANAP ASN.1 - -
R3‑001444 Clarification on Security Mode Control - -
R3‑001445 Correction of reference handling and some other editorial issues - -
R3‑001447 - - -
R3‑001448 - - -
R3‑001449 - - -
R3‑001450 Updated CR on cause values on msg and RL level in NBAP (update TDOC R3-001120/CR086r1) - -
R3‑001451 Updated CR on cause values on msg and RL level in RNSAP (update TDOC R3-001121/CR073r1) - -
R3‑001452 - - -
R3‑001453 DL ISCP values for Node B - -
R3‑001454 Indication of discontinuous transfer for NT data in RAB assignment - -
R3‑001455 Maximum value of IE 'RAB Subflow Combination bit rate' - -
R3‑001456 - - -
R3‑001457 - - -
R3‑001458 - - -
R3‑001464 - - -
R3‑001465 Clarification to RNSAP Message Syntax - -
R3‑001466 - - -
R3‑001467 - - -
R3‑001469 Editorial correction for NBAP ASN.1 - -
R3‑001470 Number of DL channelisation code - -
R3‑001471 - - -
R3‑001472 - - -
R3‑001473 - - -
R3‑001474 - - -
R3‑001476 Correction of CR implementation on version - -
R3‑001477 - - -
R3‑001478 - - -
R3‑001479 Section 9.1 alignment - -
R3‑001480 Section 9.1 alignment - -
R3‑001481 - - -
R3‑001483 Introduction of Rx Timing Deviation measurement for TDD for location services - -
R3‑001484 Introduction of Rx Timing Deviation measurement for TDD for locations services - -
R3‑001485 - - -
R3‑001486 - - -
R3‑001487 Definition of UE context - -
R3‑001488 Mismatch between measurement type and object - -
R3‑001489 Introduction of first RLS indicator - -
R3‑001490 - - -
R3‑001491 - - -
R3‑001492 - - -
R3‑001493 - - -
R3‑001494 - - -
R3‑001495 - - -
R3‑001496 - - -
R3‑001497 Alignment of Diversity Indication IE between tabular format and ASN.1 - -
R3‑001498 Corrections on inconsistency sync channel definition for TDDs - -
R3‑001499 - - -
R3‑001500 - - -
R3‑001501 - - -
R3‑001502 Reference for the limited power increase algorithm - -
R3‑001503 - - -
R3‑001504 - - -
R3‑001505 - - -
R3‑001506 - - -
R3‑001507 - - -
R3‑001508 - - -
R3‑001509 Proposed removing constrained statement in Location Report (RANAP) - -
R3‑001510 Clarification of handling of priority and pre-emption - -
R3‑001511 Description of interaction between Relocation Resource Allocation procedure and Iu Release procedure is incomplete - -
R3‑001512 Interaction between Class 2 messages and the RELOCATION REQUIRED message. - -
R3‑001513 Change of the RANAP IMEI coding to hexadecimal from present TBCD - -
R3‑001514 Clarification for Relocation Resource Allocation procedure - -
R3‑001515 - - -
R3‑001516 - - -
R3‑001517 - - -
R3‑001518 - - -
R3‑001519 Correction of DPCH Constant value IE - -
R3‑001520 More stringent power control behaviour specification in NBAP - -
R3‑001521 More stringent power control behaviour specification in RNSAP - -
R3‑001522 d-RNTI allocation during Relocation - -
r3‑001523 Limiting length of Spare Extension over Iu - -
r3‑001524 - - -
R3‑001525 - - -
R3‑001527 Ambiguous CTrCh Setup Resp - -
R3‑001528 Range bounds related to TFCS, TFS and PDSCH code mapping - -
R3‑001529 Simplified fault handling for CTrCh Reconfiguration - -
R3‑001530 - - -
R3‑001531 - - -
R3‑001532 PRACH scambling code word - -
R3‑001533 - - -
R3‑001534 - - -
R3‑001536 Clarification of notations used in SABP - -
R3‑001537 Charging issues during RAB modification - -
R3‑001538 - - -
R3‑001539 Clarification of ATM cell format - -
R3‑001540 Clarification of ATM cell format - -
R3‑001541 Correction of CR implementation on version 3.0.0 - -
R3‑001542 - - -
R3‑001543 - - -
R3‑001544 - - -
R3‑001545 - - -
R3‑001546 Change of definition of the Quality Estimation (QE) for TDD - -
R3‑001547 Change of definition of the Quality Estimation (QE) for TDD - -
R3‑001548 Modification of number of PI for TDD - -
R3‑001549 Zero bit transport block Handling for USCH - -
R3‑001550 - - -
R3‑001551 User Plane Protocol Version Control R3 -
R3‑001552 Codec impacts of SRNS Relocation R3 -
R3‑001554 - - -
R3‑001555 - - -
R3‑001556 - - -
R3‑001557 - - -
R3‑001559 Clarification of ATM cell format - -
R3‑001560 Clarification of ATM cell format - -
R3‑001561 - - -
R3‑001562 Clarification on "ALLNBCC" - -
R3‑001564 Change of definition of the Quality Estimation (QE) for TDD - -
R3‑001565 Change of definition of the Quality Estimation (QE) for TDD - -
R3‑001567 - - -
R3‑001568 Introduction of SFN IE - -
R3‑001569 - - -
R3‑001570 DL Initial Power after Handover - -
R3‑001571 - - -
R3‑001572 - - -
R3‑001573 - - -
R3‑001574 Alignment of Common TrCH init with RRC - -
R3‑001575 UL Power Clarification for Node B generated SIB in TDD - -
R3‑001576 - - -
R3‑001577 Clarification of which ASN.1 - -
R3‑001578 Progress of Real-Time PS Domain SRNS Relocation R3 -
R3‑001579 - - -
R3‑001580 - - -
r3‑001581 Relocation interaction with PDCP R3 -
r3‑001582 Mapping between RAB-ID and DCH is missing in Relocation container - -
R3‑001583 - - -
R3‑001584 Reference for the limited power increase algorithm - -
R3‑001585 Power Offset for S-CCPCH - -
R3‑001586 Reference for the definition of invalid CFN. - -
R3‑001587 Change of definition of the quality estimate (QE) - -
R3‑001588 - - -
R3‑001589 - - -
R3‑001590 Addition of limited power increase parameters in Cell Setup and Reconfiguration - -
R3‑001591 Alignment of System Information - -
R3‑001592 Modifications related to DSCH and [TDD USCH] on Iur - -
R3‑001594 - - -
R3‑001595 Iu user plane version negotiation for TrFO - -
R3‑001596 - - -
R3‑001597 Selection of S-CCPCH in the FACH data transfer procedure - -
R3‑001598 SCTP corrections for ALCAP - -
R3‑001599 Correction to version number of SCTP and M3UA - -
R3‑001600 Correction to version number of SCTP and M3UA - -
r3‑001601 - - -
r3‑001602 emoving redundant specification from Iu UP - -
R3‑001603 - - -
R3‑001604 - - -
R3‑001605 - - -
R3‑001606 - - -
R3‑001607 - - -
R3‑001610 - - -
R3‑001611 Downlink power balancing - -
R3‑001612 Downlink power balancing - -
R3‑001613 - - -
R3‑001614 Transport bearer related parameters - -
R3‑001615 LCS support on Iur - -
R3‑001616 Transport bearer related parameters - -
R3‑001617 RNSAP support for switching from CELL-DCH to CELL-FACH - -
R3‑001618 - - -
R3‑001619 - - -
R3‑001620 Section 9.1 alignment - -
R3‑001621 Section 9.1 alignment - -
R3‑001622 Insertion of missing chapter header - -
R3‑001623 - - -
R3‑001624 - - -
R3‑001625 Connection of the tabular format/ASN.1 for the cause IE - -
R3‑001626 Clarification of criticality modelling and protocol error identity - -
R3‑001627 Introduction of "rapporteur number" into criticality - -
R3‑001628 - - -
R3‑001629 Clarification to RANAP Message Syntax - -
R3‑001630 Clarification to NBAP Message Syntax - -
R3‑001631 Adjusting the presentation of EP descriptions to follow specirfication notations - -
R3‑001632 Modification of CN Broadcast Information - -
R3‑001634 - - -
R3‑001635 - - -
R3‑001636 - - -
R3‑001637 Transforming tabular format Choices to ASN.1 for RNSAP - -
R3‑001638 Transforming tabular format Choices to ASN.1 for NBAP - -
R3‑001639 Handling of measurements non available - -
R3‑001640 Handling of measurements non available - -
R3‑001642 - - -
R3‑001643 - - -

page generated from database: 2019-08-12 14:39:02