Agenda Item: 3

Source: ARIB (Japan)

Title: Baseline document proposal from ARIB SWG4 #1

Contents of ARIB Volume 4 ”Specifications of Mobile Station for 3G Mobile System (Ver.1.0-1.0)”[1] and major parameters of RF specification requirements are attached.
As shown the list below, Chapter2 (General requirement), Chapter5, Section5.1 (Transmitting and receiving characteristics) and Section5.4 (Performance requirements) to Section5.5 (Timing requirements) should be discussed in TSG-RAN WG4.
Chapter3 (EMC) and Chapter4 (Safety) are possibly handled in TSG-RAN WG4.
TSG-T (Terminal) WG1 and TSG-T WG2 will be handled other items (e.g. test and interfaces).

Relationship between ARIB Volume4 and 3GPP TSG WGs
Contents of ARIB Volume4	3GPP TSG-RAN WG4	3GPP TSG-T	
		TSG-T WG1	TSG-T WG2	
Chapter1
 “Introduction”	Sec.1.1 “Scope” to 
Sec.1.3 “References”				
Chapter2
 “General
 Requirement”	Sec.2.1 “Functional Requirements”				
	Sec.2.2 “Radio Frequency band” to Sec.2.6 “Antenna Characteristics”				
	Sec.2.7 “Security” to Sec.2.10 “Test Function Requirements”				
Chapter3 “EMC”	()		()	
Chapter4 “Safety”	()		()	
Chapter5, 6
 “Technical 
Requirements”	Section5.1 “RF Specifications”
Section5.4 
 “Performance Requirements”
Section5.5 
 “Timing Requirements”				
Chapter7 “Sequence Flow”	N/A				
Chapter8 “External Interface”				
Chapter9 “Logical Test Interface”				
Chapter10 “Reporting Practice” Chapter11 “Standard Test Conditions”	N/A				
Chapter12 ”Confidence Limit”				
Chapter13 “Measurement Procedures”				
Reference 
 [1] The latest Mobile Station specifications of ARIB Volume 4 ”Specifications of Mobile Station for 3G Mobile System (Ver.1.0-1.0)”, Source: ARIB, 3GPP TSGR4#1(99)002

Annex-A

Contents of ARIB Volume 4 
“Specification of Mobile Station for 3G Mobile System” 

  1. Introduction
  2. General Requirements
  3. EMC 
  4. Safety
  5. Technical Requirements for FDD Mode
  6. TDD Mode
  [7 Sequence Flow]
  8. External Interface
  9. Logical Test Interface
  [10. Reporting Practice]
  [11. Standard Test Conditions]
  12. Confidence Limit
  13. Measurement Procedures

Annex-B
Volume 4 Contents for TSG-T WG1

9. Logical Test Interface
9.1 Overview of Logical Interface
9.1.1 Logical Service model
9.1.2 List of logical service
9.1.3 Extension of logical test interface
9.1.4 Handling of Parameters/data
9.1.4.1 Object model of parameters/data
9.1.4.2 Setting and Retrieving Services Sequence
9.1.4.3 List of Settable/retrievable Parameters/data
9.1.5 Test Control Operation
9.1.5.1 Extension of the test control operation
9.1.5.2 Object model of test control operation
9.1.5.3 Sequence of test control operation
9.2 Underlying protocol and physical test interface

13. Measurement Procedures
13.1	RF Specification
13.1.1	Transmitting Characteristics
13.1.1.1 Frequency Stability
13.1.1.2 Maximum Output Power
13.1.1.3 Output Power Control
13.1.1.4 Adjacent Channel Leakage Power
13.1.1.5 Spurious Emission Power
13.1.1.6 Transmitting Intermodulation
13.1.1.7 Transmitting ON/OFF Ratio
13.1.1.8 Modulation Accuracy
13.1.1.9 DTX 
13.1.2	Receiving Characteristics
13.1.2.1 Reference Sensitivity
13.1.2.2 Dynamic Range
13.1.2.3 Adjacent Channel Selectivity
13.1.2.4 Intermodulation Sensitivity
13.1.2.5 Spurious Response
13.1.2.6 RSSI Detection Range and Accuracy
13.1.2.7 SIR Measurement Range and Accuracy
13.1.2.8 Spurious Emission Power
13.2	Performance Requirements
13.2.1 Static Performance
13.2.2 Dynamic Performance
13.2.3 Synchronization Performance
13.2.4 Search of other Cells
13.3 Timing Requirements
13.3.1 Synchronization
13.3.2 Channel Timing Dependencies
13.3.3 Reception Timing