uicc.hci.services.cardemulation
Interface CardEmulationMessage

All Superinterfaces:

HCIMessage

public interface CardEmulationMessage
extends HCIMessage

The CardEmulationMessage offers specialized methods to generate card emulation commands or events. Note: An Applet which did not register a listener for card emulation mode will be invoked with process() method.

Field Summary

static byte	PARAM_ID_TYPE_A_CARD_APPLICATION_DATA The historical bytes as defined in ISO/IEC 14443-4 for type A
static byte	PARAM_ID_TYPE_A_CARD_ATQA Pre-formatted ATQA; byte 1 shall contain b8..1, byte 2 b16..9 of the ATQA coded as defined in ISO/IEC 14443- 3 [6] for type A
static byte	PARAM_ID_TYPE_A_CARD_CID_SUPPORT support for CID as defined ISO/IEC 14443-4
static byte	PARAM_ID_TYPE_A_CARD_CLT_SUPPORT Support of tunneling mode for ISO/IEC 14443-4 [7] non compliant protocols
static byte	PARAM_ID_TYPE_A_CARD_DATARATE_MAX Maximum data rate supported
static byte	PARAM_ID_TYPE_A_CARD_FWI_SFGI Frame waiting time and Start-up frame guard time as defined in ISO/IEC 14443-4 for type A
static byte	PARAM_ID_TYPE_A_CARD_MODE Type A card emulation enabled indicator
static byte	PARAM_ID_TYPE_A_CARD_SAK Pre-formatted SAK as defined in ISO/IEC 14443-3 for type A
static byte	PARAM_ID_TYPE_A_CARD_UID_REG UID as defined in ISO/IEC14443-3 for type A
static byte	PARAM_ID_TYPE_B_CARD_AFI Application family identifier as defined in ISO/IEC 14443-3 [6] for type B
static byte	PARAM_ID_TYPE_B_CARD_ATQB Additional data for ATQB
static byte	PARAM_ID_TYPE_B_CARD_DATARATE_MAX Maximum data rate supported
static byte	PARAM_ID_TYPE_B_CARD_HIGHER_LAYER_RESPONSE Higher Layer response in answer to ATTRIB command as defined in ISO/IEC 14443-3 [6] for type B
static byte	PARAM_ID_TYPE_B_CARD_MODE Type B card emulation enabled indicator
static byte	PARAM_ID_TYPE_B_CARD_PUPI_REG PUPI as defined in ISO/IEC 14443-3 [6] for type B.
static byte	PARAM_ID_TYPE_B_PRIME_CARD_DAT_OUT Data to reply if the incoming data matches with PAT_IN pattern
static byte	PARAM_ID_TYPE_B_PRIME_CARD_MODE Type B' card emulation enabled indicator
static byte	PARAM_ID_TYPE_B_PRIME_CARD_PAT_IN Pattern to match with the incoming data
static byte	PARAM_ID_TYPE_F_CARD_CLT_SUPPORT Support of tunnelling mode for anti-collision data exchange in type F card emulation
static byte	PARAM_ID_TYPE_F_CARD_MODE Type F card emulation enabled indicator
static byte	PARAM_ID_TYPE_F_CARD_SPEED_CAP CLF Speed Capabilities for Type F

Fields inherited from interface uicc.hci.framework.HCIMessage

INS_ANY_CLOSE_PIPE, INS_ANY_GET_PARAMETER, INS_ANY_OPEN_PIPE, INS_ANY_SET_PARAMETER, RESP_ADM_E_NO_PIPES_AVAILABLE, RESP_ANY_E_CMD_NOT_SUPPORTED, RESP_ANY_E_CMD_PAR_UNKNOWN, RESP_ANY_E_INHIBITED, RESP_ANY_E_NOK, RESP_ANY_E_NOT_CONNECTED, RESP_ANY_E_PIPE_ACCESS_DENIED, RESP_ANY_E_PIPE_NOT_OPENED, RESP_ANY_E_REG_ACCESS_DENIED, RESP_ANY_E_REG_PAR_UNKNOWN, RESP_ANY_OK, TYPE_COMMAND, TYPE_EVENT, TYPE_RESPONSE

Method Summary

void	prepareAndSendGetParameterCommmand(byte paramID) This method builds the HCI command ANY_GET_PARAMETER for the indicated information and sends it to the Contactless Reader Gate of the CLF.
void	prepareAndSendSendDataEvent(byte[] data, short offset, short len) This method builds the the HCI event EVT_SEND_DATA sends it to the Contactless Card Emulation Gate of the CLF.

Methods inherited from interface uicc.hci.framework.HCIMessage

getInstruction, getReceiveBuffer, getReceiveLength, getReceiveOffset, getType, isComplete, isHeading

Field Detail

PARAM_ID_TYPE_A_CARD_MODE

static final byte PARAM_ID_TYPE_A_CARD_MODE

Type A card emulation enabled indicator

See Also:

Constant Field Values

PARAM_ID_TYPE_A_CARD_UID_REG

static final byte PARAM_ID_TYPE_A_CARD_UID_REG

UID as defined in ISO/IEC14443-3 for type A

See Also:

Constant Field Values

PARAM_ID_TYPE_A_CARD_SAK

static final byte PARAM_ID_TYPE_A_CARD_SAK

Pre-formatted SAK as defined in ISO/IEC 14443-3 for type A

See Also:

Constant Field Values

PARAM_ID_TYPE_A_CARD_ATQA

static final byte PARAM_ID_TYPE_A_CARD_ATQA

Pre-formatted ATQA; byte 1 shall contain b8..1, byte 2 b16..9 of the ATQA coded as defined in ISO/IEC 14443- 3 [6] for type A

See Also:

Constant Field Values

PARAM_ID_TYPE_A_CARD_APPLICATION_DATA

static final byte PARAM_ID_TYPE_A_CARD_APPLICATION_DATA

The historical bytes as defined in ISO/IEC 14443-4 for type A

See Also:

Constant Field Values

PARAM_ID_TYPE_A_CARD_FWI_SFGI

static final byte PARAM_ID_TYPE_A_CARD_FWI_SFGI

Frame waiting time and Start-up frame guard time as defined in ISO/IEC 14443-4 for type A

See Also:

Constant Field Values

PARAM_ID_TYPE_A_CARD_CID_SUPPORT

static final byte PARAM_ID_TYPE_A_CARD_CID_SUPPORT

support for CID as defined ISO/IEC 14443-4

See Also:

Constant Field Values

PARAM_ID_TYPE_A_CARD_CLT_SUPPORT

static final byte PARAM_ID_TYPE_A_CARD_CLT_SUPPORT

Support of tunneling mode for ISO/IEC 14443-4 [7] non compliant protocols

See Also:

Constant Field Values

PARAM_ID_TYPE_A_CARD_DATARATE_MAX

static final byte PARAM_ID_TYPE_A_CARD_DATARATE_MAX

Maximum data rate supported

See Also:

Constant Field Values

PARAM_ID_TYPE_B_CARD_MODE

static final byte PARAM_ID_TYPE_B_CARD_MODE

Type B card emulation enabled indicator

See Also:

Constant Field Values

PARAM_ID_TYPE_B_CARD_PUPI_REG

static final byte PARAM_ID_TYPE_B_CARD_PUPI_REG

PUPI as defined in ISO/IEC 14443-3 [6] for type B.

See Also:

Constant Field Values

PARAM_ID_TYPE_B_CARD_AFI

static final byte PARAM_ID_TYPE_B_CARD_AFI

Application family identifier as defined in ISO/IEC 14443-3 [6] for type B

See Also:

Constant Field Values

PARAM_ID_TYPE_B_CARD_ATQB

static final byte PARAM_ID_TYPE_B_CARD_ATQB

Additional data for ATQB

See Also:

Constant Field Values

PARAM_ID_TYPE_B_CARD_HIGHER_LAYER_RESPONSE

static final byte PARAM_ID_TYPE_B_CARD_HIGHER_LAYER_RESPONSE

Higher Layer response in answer to ATTRIB command as defined in ISO/IEC 14443-3 [6] for type B

See Also:

Constant Field Values

PARAM_ID_TYPE_B_CARD_DATARATE_MAX

static final byte PARAM_ID_TYPE_B_CARD_DATARATE_MAX

Maximum data rate supported

See Also:

Constant Field Values

PARAM_ID_TYPE_B_PRIME_CARD_MODE

static final byte PARAM_ID_TYPE_B_PRIME_CARD_MODE

Type B' card emulation enabled indicator

See Also:

Constant Field Values

PARAM_ID_TYPE_B_PRIME_CARD_PAT_IN

static final byte PARAM_ID_TYPE_B_PRIME_CARD_PAT_IN

Pattern to match with the incoming data

See Also:

Constant Field Values

PARAM_ID_TYPE_B_PRIME_CARD_DAT_OUT

static final byte PARAM_ID_TYPE_B_PRIME_CARD_DAT_OUT

Data to reply if the incoming data matches with PAT_IN pattern

See Also:

Constant Field Values

PARAM_ID_TYPE_F_CARD_MODE

static final byte PARAM_ID_TYPE_F_CARD_MODE

Type F card emulation enabled indicator

See Also:

Constant Field Values

PARAM_ID_TYPE_F_CARD_SPEED_CAP

static final byte PARAM_ID_TYPE_F_CARD_SPEED_CAP

CLF Speed Capabilities for Type F

See Also:

Constant Field Values

PARAM_ID_TYPE_F_CARD_CLT_SUPPORT

static final byte PARAM_ID_TYPE_F_CARD_CLT_SUPPORT

Support of tunnelling mode for anti-collision data exchange in type F card emulation

See Also:

Constant Field Values

Method Detail

prepareAndSendGetParameterCommmand

void prepareAndSendGetParameterCommmand(byte paramID)
                                        throws HCIException

This method builds the HCI command ANY_GET_PARAMETER for the indicated information and sends it to the Contactless Reader Gate of the CLF.

Parameters:

paramID - constant PARAM_ID_* indicating the requested value

Throws:

HCIException - (editor's note: add exceptions)

prepareAndSendSendDataEvent

void prepareAndSendSendDataEvent(byte[] data,
                                 short offset,
                                 short len)
                                 throws HCIException

This method builds the the HCI event EVT_SEND_DATA sends it to the Contactless Card Emulation Gate of the CLF.

Parameters:

data - data to be sent

offset - offset of data

len - length of data

Throws:

HCIException - (editor's note: add exceptions