A C D E F G H I L M O P R S T U

P

PARAM_ID_TYPE_A_CARD_APPLICATION_DATA - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

The historical bytes as defined in ISO/IEC 14443-4 for type A

PARAM_ID_TYPE_A_CARD_ATQA - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Pre-formatted ATQA; byte 1 shall contain b8..1, byte 2 b16..9 of the ATQA coded as defined in ISO/IEC 14443- 3 [6] for type A

PARAM_ID_TYPE_A_CARD_CID_SUPPORT - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

support for CID as defined ISO/IEC 14443-4

PARAM_ID_TYPE_A_CARD_CLT_SUPPORT - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Support of tunneling mode for ISO/IEC 14443-4 [7] non compliant protocols

PARAM_ID_TYPE_A_CARD_DATARATE_MAX - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Maximum data rate supported

PARAM_ID_TYPE_A_CARD_FWI_SFGI - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Frame waiting time and Start-up frame guard time as defined in ISO/IEC 14443-4 for type A

PARAM_ID_TYPE_A_CARD_MODE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Type A card emulation enabled indicator

PARAM_ID_TYPE_A_CARD_SAK - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Pre-formatted SAK as defined in ISO/IEC 14443-3 for type A

PARAM_ID_TYPE_A_CARD_UID_REG - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

UID as defined in ISO/IEC14443-3 for type A

PARAM_ID_TYPE_A_READER_APPLICATION_DATA - Static variable in interface uicc.hci.services.readermode.ReaderMessage

The historical bytes as defined in ISO/IEC 14443-3 for type A

PARAM_ID_TYPE_A_READER_ATQA - Static variable in interface uicc.hci.services.readermode.ReaderMessage

Pre-formatted ATQA as defined in ISO/IEC 14443-3 for type A (see TS 102 622 for coding of the value)

PARAM_ID_TYPE_A_READER_DATARATE_MAX - Static variable in interface uicc.hci.services.readermode.ReaderMessage

Maximum data rate supported

PARAM_ID_TYPE_A_READER_FWI - Static variable in interface uicc.hci.services.readermode.ReaderMessage

SFGT Frame waiting time and start-up frame guard time as defined in ISO/IEC 14443-4 for type A

PARAM_ID_TYPE_A_READER_SAK - Static variable in interface uicc.hci.services.readermode.ReaderMessage

Pre-formatted SAK as defined in ISO/IEC 14443-3 for type A

PARAM_ID_TYPE_A_READER_UID - Static variable in interface uicc.hci.services.readermode.ReaderMessage

UID as defined in ISO/IEC 14443-3 for type A

PARAM_ID_TYPE_B_CARD_AFI - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Application family identifier as defined in ISO/IEC 14443-3 [6] for type B

PARAM_ID_TYPE_B_CARD_ATQB - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Additional data for ATQB

PARAM_ID_TYPE_B_CARD_DATARATE_MAX - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Maximum data rate supported

PARAM_ID_TYPE_B_CARD_HIGHER_LAYER_RESPONSE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Higher Layer response in answer to ATTRIB command as defined in ISO/IEC 14443-3 [6] for type B

PARAM_ID_TYPE_B_CARD_MODE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Type B card emulation enabled indicator

PARAM_ID_TYPE_B_CARD_PUPI_REG - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

PUPI as defined in ISO/IEC 14443-3 [6] for type B.

PARAM_ID_TYPE_B_PRIME_CARD_DAT_OUT - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Data to reply if the incoming data matches with PAT_IN pattern

PARAM_ID_TYPE_B_PRIME_CARD_MODE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Type B' card emulation enabled indicator

PARAM_ID_TYPE_B_PRIME_CARD_PAT_IN - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Pattern to match with the incoming data

PARAM_ID_TYPE_B_READER_AFI - Static variable in interface uicc.hci.services.readermode.ReaderMessage

Application family identifier as defined in ISO/IEC 14443-3 for type B used by the reader to poll the target

PARAM_ID_TYPE_B_READER_APPLICATION_DATA - Static variable in interface uicc.hci.services.readermode.ReaderMessage

Application data as defined in ISO/IEC 14443-3 for ATQB

PARAM_ID_TYPE_B_READER_HIGHER_LAYER_DATA - Static variable in interface uicc.hci.services.readermode.ReaderMessage

Higher layer data as defined in ISO/IEC 14443-3 for ATTRIB command

PARAM_ID_TYPE_B_READER_HIGHER_LAYER_RESPONSE - Static variable in interface uicc.hci.services.readermode.ReaderMessage

Higher layer response as defined in ISO/IEC 14443-3 for answer to ATTRIB command

PARAM_ID_TYPE_B_READER_PUPI - Static variable in interface uicc.hci.services.readermode.ReaderMessage

PUPI as defined in ISO/IEC 14443-3 for type B

PARAM_ID_TYPE_F_CARD_CLT_SUPPORT - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Support of tunnelling mode for anti-collision data exchange in type F card emulation

PARAM_ID_TYPE_F_CARD_MODE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

Type F card emulation enabled indicator

PARAM_ID_TYPE_F_CARD_SPEED_CAP - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage

CLF Speed Capabilities for Type F

prepareAndSendConnectivityEvent() - Method in interface uicc.hci.services.connectivity.ConnectivityMessage

This method builds the HCI event EVT_CONNECTIVITY which notifies the terminal host that it shall send a "HCI connectivity event" as defined in TS 102 223.

prepareAndSendGetParameterCommand(byte) - Method in interface uicc.hci.services.readermode.ReaderMessage

This method builds the HCI command ANY_GET_PARAMETER for the indicated information and sends it to the Contactless Reader Gate of the CLF.

prepareAndSendGetParameterCommmand(byte) - Method in interface uicc.hci.services.cardemulation.CardEmulationMessage

This method builds the HCI command ANY_GET_PARAMETER for the indicated information and sends it to the Contactless Reader Gate of the CLF.

prepareAndSendSendDataEvent(byte[], short, short) - Method in interface uicc.hci.services.cardemulation.CardEmulationMessage

This method builds the the HCI event EVT_SEND_DATA sends it to the Contactless Card Emulation Gate of the CLF.

prepareAndSendTransactionEvent(byte[], short, short, byte[], short, short) - Method in interface uicc.hci.services.connectivity.ConnectivityMessage

This method builds the HCI event EVT_TRANSACTION which notifies the terminal host that it shall launch an application on the terminal which is associated to an Applet in the UICC host identified by the AID.

prepareAndSendWriteXchgDataCommand(byte, byte[], short, short) - Method in interface uicc.hci.services.readermode.ReaderMessage

This method builds the HCI command WR_XCHG_DATA with the data passed in the parameter data and sends it to the Contactless Reader Gate of the CLF.