- PARAM_ID_TYPE_A_CARD_APPLICATION_DATA - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
The historical bytes as defined in ISO/IEC 14443-4 for type A
- PARAM_ID_TYPE_A_CARD_ATQA - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Pre-formatted ATQA; byte 1 shall contain b8..1, byte 2 b16..9 of the ATQA coded as defined in ISO/IEC 14443- 3 [6] for type A
- PARAM_ID_TYPE_A_CARD_CID_SUPPORT - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
support for CID as defined ISO/IEC 14443-4
- PARAM_ID_TYPE_A_CARD_CLT_SUPPORT - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Support of tunneling mode for ISO/IEC 14443-4 [7] non compliant protocols
- PARAM_ID_TYPE_A_CARD_DATARATE_MAX - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Maximum data rate supported
- PARAM_ID_TYPE_A_CARD_FWI_SFGI - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Frame waiting time and Start-up frame guard time as defined in ISO/IEC 14443-4 for type A
- PARAM_ID_TYPE_A_CARD_MODE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Type A card emulation enabled indicator
- PARAM_ID_TYPE_A_CARD_SAK - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Pre-formatted SAK as defined in ISO/IEC 14443-3 for type A
- PARAM_ID_TYPE_A_CARD_UID_REG - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Deprecated.
- PARAM_ID_TYPE_A_READER_APPLICATION_DATA - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
The historical bytes as defined in ISO/IEC 14443-3 for type A
- PARAM_ID_TYPE_A_READER_ATQA - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
Pre-formatted ATQA as defined in ISO/IEC 14443-3 for type A
(see TS 102 622 for coding of the value)
- PARAM_ID_TYPE_A_READER_DATARATE_MAX - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
Maximum data rate supported
- PARAM_ID_TYPE_A_READER_FWI - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
SFGT Frame waiting time and start-up frame guard time as
defined in ISO/IEC 14443-4 for type A
- PARAM_ID_TYPE_A_READER_OPERATING_STATUS - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
reader RF gate registry OPERATION STATUS for type A
see TS 102 622 for the coding of the value.
- PARAM_ID_TYPE_A_READER_SAK - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
Pre-formatted SAK as defined in ISO/IEC 14443-3 for type A
- PARAM_ID_TYPE_A_READER_UID - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
UID as defined in ISO/IEC 14443-3 for type A
- PARAM_ID_TYPE_B_CARD_AFI - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Application family identifier as defined in ISO/IEC 14443-3 [6] for type B
- PARAM_ID_TYPE_B_CARD_ATQB - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Additional data for ATQB
- PARAM_ID_TYPE_B_CARD_DATARATE_MAX - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Maximum data rate supported
- PARAM_ID_TYPE_B_CARD_HIGHER_LAYER_RESPONSE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Higher Layer response in answer to ATTRIB command as defined in ISO/IEC 14443-3 [6] for type B
- PARAM_ID_TYPE_B_CARD_MODE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Type B card emulation enabled indicator
- PARAM_ID_TYPE_B_CARD_PUPI_REG - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Deprecated.
- PARAM_ID_TYPE_B_PRIME_CARD_DAT_OUT - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Data to reply if the incoming data matches with PAT_IN pattern
- PARAM_ID_TYPE_B_PRIME_CARD_MODE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Type B' card emulation enabled indicator
- PARAM_ID_TYPE_B_PRIME_CARD_PAT_IN - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Pattern to match with the incoming data
- PARAM_ID_TYPE_B_READER_AFI - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
Application family identifier as defined in ISO/IEC 14443-3
for type B used by the reader to poll the target
- PARAM_ID_TYPE_B_READER_APPLICATION_DATA - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
Application data as defined in ISO/IEC 14443-3 for ATQB
- PARAM_ID_TYPE_B_READER_HIGHER_LAYER_DATA - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
Higher layer data as defined in ISO/IEC 14443-3 for ATTRIB command
- PARAM_ID_TYPE_B_READER_HIGHER_LAYER_RESPONSE - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
Higher layer response as defined in ISO/IEC 14443-3 for answer
to ATTRIB command
- PARAM_ID_TYPE_B_READER_OPERATING_STATUS - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
reader RF gate registry OPERATING STATUS for type B
see TS 102 622 for the coding of the value.
- PARAM_ID_TYPE_B_READER_PUPI - Static variable in interface uicc.hci.services.readermode.ReaderMessage
-
PUPI as defined in ISO/IEC 14443-3 for type B
- PARAM_ID_TYPE_F_CARD_CLT_SUPPORT - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Support of tunnelling mode for anti-collision data exchange in type F card emulation
- PARAM_ID_TYPE_F_CARD_MODE - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
Type F card emulation enabled indicator
- PARAM_ID_TYPE_F_CARD_SPEED_CAP - Static variable in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
CLF Speed Capabilities for Type F
- prepareAndSendConnectivityEvent() - Method in interface uicc.hci.services.connectivity.ConnectivityService
-
This non-blocking method builds the HCI event EVT_CONNECTIVITY which notifies
the terminal host that it shall send a "HCI connectivity event"
as defined in TS 102 223.
- prepareAndSendGetParameterCommand(byte) - Method in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
This non-blocking method builds the HCI command ANY_GET_PARAMETER for the
indicated information and sends it to the appropriate Card RF Gate of the CLF.
- prepareAndSendGetParameterCommand(byte) - Method in interface uicc.hci.services.readermode.ReaderMessage
-
This non-blocking method builds the HCI command ANY_GET_PARAMETER for the
indicated information and sends it to the Contactless Reader Gate of the CLF.
- prepareAndSendSendDataEvent(byte[], short, short) - Method in interface uicc.hci.services.cardemulation.CardEmulationMessage
-
This non-blocking method builds the the HCI event EVT_SEND_DATA sends it to the
Contactless Card Emulation Gate of the CLF.
- prepareAndSendTransactionEvent(byte[], short, short, byte[], short, short) - Method in interface uicc.hci.services.connectivity.ConnectivityService
-
This non-blocking method builds the HCI event EVT_TRANSACTION which notifies
the terminal host that it shall launch an application on the terminal
which is associated to an Applet in the UICC host identified.
- prepareAndSendTransactionEvent(byte[], short, short) - Method in interface uicc.hci.services.connectivity.ConnectivityService
-
This non-blocking method builds the HCI event EVT_TRANSACTION which notifies
the terminal host that it shall launch an application on the terminal
which is associated to an Applet in the UICC host identified.
- prepareAndSendWriteXchgDataCommand(byte, byte[], short, short) - Method in interface uicc.hci.services.readermode.ReaderMessage
-
This non-blocking method builds the HCI command WR_XCHG_DATA with the data passed
in the parameter data and sends it to the Contactless Reader Gate of the CLF.