public interface CardEmulationMessage extends HCIMessage
| Modifier and Type | Field and Description |
|---|---|
static byte |
PARAM_ID_TYPE_A_CARD_APPLICATION_DATA
The historical bytes as defined in ISO/IEC 14443-4 for type A
|
static byte |
PARAM_ID_TYPE_A_CARD_ATQA
Pre-formatted ATQA; byte 1 shall contain b8..1, byte 2 b16..9 of the ATQA coded as defined in ISO/IEC 14443- 3 [6] for type A
|
static byte |
PARAM_ID_TYPE_A_CARD_CID_SUPPORT
support for CID as defined ISO/IEC 14443-4
|
static byte |
PARAM_ID_TYPE_A_CARD_CLT_SUPPORT
Support of tunneling mode for ISO/IEC 14443-4 [7] non compliant protocols
|
static byte |
PARAM_ID_TYPE_A_CARD_DATARATE_MAX
Maximum data rate supported
|
static byte |
PARAM_ID_TYPE_A_CARD_FWI_SFGI
Frame waiting time and Start-up frame guard time as defined in ISO/IEC 14443-4 for type A
|
static byte |
PARAM_ID_TYPE_A_CARD_MODE
Type A card emulation enabled indicator
|
static byte |
PARAM_ID_TYPE_A_CARD_SAK
Pre-formatted SAK as defined in ISO/IEC 14443-3 for type A
|
static byte |
PARAM_ID_TYPE_A_CARD_UID_REG
Deprecated.
|
static byte |
PARAM_ID_TYPE_B_CARD_AFI
Application family identifier as defined in ISO/IEC 14443-3 [6] for type B
|
static byte |
PARAM_ID_TYPE_B_CARD_ATQB
Additional data for ATQB
|
static byte |
PARAM_ID_TYPE_B_CARD_DATARATE_MAX
Maximum data rate supported
|
static byte |
PARAM_ID_TYPE_B_CARD_HIGHER_LAYER_RESPONSE
Higher Layer response in answer to ATTRIB command as defined in ISO/IEC 14443-3 [6] for type B
|
static byte |
PARAM_ID_TYPE_B_CARD_MODE
Type B card emulation enabled indicator
|
static byte |
PARAM_ID_TYPE_B_CARD_PUPI_REG
Deprecated.
|
static byte |
PARAM_ID_TYPE_B_PRIME_CARD_DAT_OUT
Data to reply if the incoming data matches with PAT_IN pattern
|
static byte |
PARAM_ID_TYPE_B_PRIME_CARD_MODE
Type B' card emulation enabled indicator
|
static byte |
PARAM_ID_TYPE_B_PRIME_CARD_PAT_IN
Pattern to match with the incoming data
|
static byte |
PARAM_ID_TYPE_F_CARD_CLT_SUPPORT
Support of tunnelling mode for anti-collision data exchange in type F card emulation
|
static byte |
PARAM_ID_TYPE_F_CARD_MODE
Type F card emulation enabled indicator
|
static byte |
PARAM_ID_TYPE_F_CARD_SPEED_CAP
CLF Speed Capabilities for Type F
|
RESP_ANY_E_CMD_NOT_SUPPORTED, RESP_ANY_E_INHIBITED, RESP_ANY_E_NOK, RESP_ANY_E_NOT_CONNECTED, RESP_ANY_E_PIPE_NOT_OPENED, RESP_ANY_E_REG_ACCESS_DENIED, RESP_ANY_E_REG_PAR_UNKNOWN, RESP_ANY_OK, TYPE_COMMAND, TYPE_EVENT, TYPE_RESPONSE| Modifier and Type | Method and Description |
|---|---|
void |
prepareAndSendGetParameterCommand(byte paramID)
This non-blocking method builds the HCI command ANY_GET_PARAMETER for the
indicated information and sends it to the appropriate Card RF Gate of the CLF.
|
void |
prepareAndSendSendDataEvent(byte[] data,
short offset,
short len)
This non-blocking method builds the the HCI event EVT_SEND_DATA sends it to the
Contactless Card Emulation Gate of the CLF.
|
boolean |
selectingMessage()
This method is used by the applet to distinguish the HCI Message command
which selected this applet from all other HCI messages.
|
getInstruction, getReceiveBuffer, getReceiveLength, getReceiveOffset, getType, isComplete, isHeadingstatic final byte PARAM_ID_TYPE_A_CARD_MODE
static final byte PARAM_ID_TYPE_A_CARD_UID_REG
static final byte PARAM_ID_TYPE_A_CARD_SAK
static final byte PARAM_ID_TYPE_A_CARD_ATQA
static final byte PARAM_ID_TYPE_A_CARD_APPLICATION_DATA
static final byte PARAM_ID_TYPE_A_CARD_FWI_SFGI
static final byte PARAM_ID_TYPE_A_CARD_CID_SUPPORT
static final byte PARAM_ID_TYPE_A_CARD_CLT_SUPPORT
static final byte PARAM_ID_TYPE_A_CARD_DATARATE_MAX
static final byte PARAM_ID_TYPE_B_CARD_MODE
static final byte PARAM_ID_TYPE_B_CARD_PUPI_REG
static final byte PARAM_ID_TYPE_B_CARD_AFI
static final byte PARAM_ID_TYPE_B_CARD_ATQB
static final byte PARAM_ID_TYPE_B_CARD_HIGHER_LAYER_RESPONSE
static final byte PARAM_ID_TYPE_B_CARD_DATARATE_MAX
static final byte PARAM_ID_TYPE_B_PRIME_CARD_MODE
static final byte PARAM_ID_TYPE_B_PRIME_CARD_PAT_IN
static final byte PARAM_ID_TYPE_B_PRIME_CARD_DAT_OUT
static final byte PARAM_ID_TYPE_F_CARD_MODE
static final byte PARAM_ID_TYPE_F_CARD_SPEED_CAP
static final byte PARAM_ID_TYPE_F_CARD_CLT_SUPPORT
void prepareAndSendGetParameterCommand(byte paramID)
throws HCIException
paramID - constant PARAM_ID_* indicating the requested valueHCIException - with the following reason code: HCI_CURRENTLY_DISABLED if the HCI interface was disabled
HCI_FRAGMENTED_MESSAGE_ONGOING if the Contactless Framework is still receiving a fragmented HCI Message
HCI_RESOURCES_NOT_AVAILABLE if the contactless framework does not have enough resources to process the command
void prepareAndSendSendDataEvent(byte[] data,
short offset,
short len)
throws HCIException,
java.lang.NullPointerException,
java.lang.ArrayIndexOutOfBoundsException
data - to be sent formated accordng to he HCI specificationoffset - of data into the data bufferlen - length of data in the data bufferHCIException - with the following reason code: HCI_CURRENTLY_DISABLED if the HCI interface was disabled
HCI_FRAGMENTED_MESSAGE_ONGOING if the Contactless Framework is still receiving a fragmented HCI Message
HCI_RESOURCES_NOT_AVAILABLE if the contactless framework does not have enough resources to process the command
java.lang.NullPointerException - if data is nulljava.lang.ArrayIndexOutOfBoundsException - if operation would cause access of data outside
array bounds.boolean selectingMessage()