The 5G Standard

3GPP TDocs (written contributions) at meeting

Meeting: R4-16 - 2001-02-19 to 2001-02-23, Vienna

meeting id: R4-16 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R4‑010235 - - -
R4‑010236 - - -
R4‑010237 Addition of S-CCPCH containing PCH into test models - -
R4‑010238 - - -
R4‑010239 - - -
R4‑010240 Differential accuracy of P-CCPCH power - -
R4‑010241 - - -
R4‑010242 - - -
R4‑010243 - - -
R4‑010244 - - -
R4‑010246 Correction to the description of the radiated spurious emission test method - -
R4‑010247 Essential corrections to TS34.124 - -
R4‑010248 - - -
R4‑010249 - - -
R4‑010250 - - -
R4‑010251 - - -
R4‑010252 UE Performance Requirements for 2 Mbps - -
R4‑010253 - - -
R4‑010254 Service Mapping for 2 Mbps - -
R4‑010255 UTRAN transport channel BLER measurement - -
R4‑010256 UTRAN physical channel BER measurement - -
R4‑010257 - - -
R4‑010258 - - -
R4‑010259 - - -
R4‑010260 - - -
R4‑010261 - - -
R4‑010262 Definition of EVM / PCDE measurement period - -
R4‑010263 Definition of EVM - -
R4‑010264 - - -
R4‑010266 CR to 25.141 for Test Tolerances in TX tests - -
R4‑010267 - - -
R4‑010268 - - -
R4‑010269 - - -
R4‑010270 - - -
R4‑010271 - - -
R4‑010272 - - -
R4‑010273 - - -
R4‑010274 - - -
R4‑010275 - - -
R4‑010276 - - -
R4‑010277 - - -
R4‑010278 - - -
R4‑010279 - - -
R4‑010280 - - -
R4‑010281 Performance requirements BCH - -
R4‑010282 - - -
R4‑010283 - - -
R4‑010285 - - -
R4‑010286 - - -
R4‑010287 - - -
R4‑010288 - - -
R4‑010289 - - -
R4‑010290 - - -
R4‑010291 UTRA (BS) TDD; Radio transmission and Reception - -
R4‑010292 Base station electromagnetic compatibility (EMC) for 1.28Mcps TDD - -
R4‑010293 - - -
R4‑010294 BS Conformance test for 1.28Mcps TDD - -
R4‑010295 Corrections in idle mode and corresponding test cases. - -
R4‑010296 - - -
R4‑010297 - - -
R4‑010298 Test case for FDD/TDD cell re-selection . - -
R4‑010299 - - -
R4‑010300 - - -
R4‑010301 - - -
R4‑010302 - - -
R4‑010303 - - -
R4‑010304 - - -
R4‑010305 - - -
R4‑010306 - - -
R4‑010307 - - -
R4‑010308 - - -
R4‑010309 - - -
R4‑010310 - - -
R4‑010311 - - -
R4‑010312 - - -
R4‑010313 Handling of Test Tolerances - Clause 8 "Performance requirements" - -
R4‑010314 Handling of Test Tolerances - Annexes - -
R4‑010315 - - -
R4‑010316 - - -
R4‑010317 - - -
R4‑010318 - - -
R4‑010319 - - -
R4‑010320 Requirements for event triggered reporting in fading conditions - -
R4‑010321 UTRAN Received total wideband power - -
R4‑010322 UE/UTRAN GPS Timing of Cell Frames for LCS - -
R4‑010323 - - -
R4‑010324 - - -
R4‑010325 - - -
R4‑010326 - - -
R4‑010327 - - -
R4‑010328 - - -
R4‑010329 - - -
R4‑010331 CPICH Ec/Io mapping - -
R4‑010333 Alignment of TS25.113 with CISPR 22 standard - -
R4‑010334 - - -
R4‑010335 - - -
R4‑010336 - - -
R4‑010337 REL 99 Corrections - -
R4‑010338 - - -
R4‑010339 Correction of reference to SM.329-8 in TS 25.104 - -
R4‑010340 Correction of reference to SM.329-8 in TS 25.141 - -
R4‑010341 Corrections to Blocking and Rx Spurious emissions tests in TS 25.141 - -
R4‑010342 - - -
R4‑010343 - - -
R4‑010344 - - -
R4‑010345 - - -
R4‑010346 - - -
R4‑010347 - - -
R4‑010348 - - -
R4‑010349 - - -
R4‑010350 Tx power during measurement on Rx characteristics - -
R4‑010351 TS25.101 Rel 99 Clarification of UARFCN (channel number) - -
R4‑010352 LS for UMTS-1800 work required from other working groups R4 -
R4‑010353 - - -
R4‑010354 - - -
R4‑010355 - - -
R4‑010356 - - -
R4‑010357 - - -
R4‑010358 - - -
R4‑010359 - - -
R4‑010360 - - -
R4‑010361 - - -
R4‑010362 Section 8 changes - -
R4‑010363 Section 9 Changes - -
R4‑010364 LS on clarification request on measurements definition and accuracy R4 -
R4‑010365 - - -
R4‑010366 - - -
R4‑010367 - - -
R4‑010368 - - -
R4‑010369 - - -
R4‑010370 - - -
R4‑010371 - - -
R4‑010372 - - -
R4‑010373 - - -
R4‑010374 - - -
R4‑010375 - - -
R4‑010376 Correction of reference to SM.329-8 in TS25.105 - -
R4‑010377 Change of the cell-reselection requirements. - -
R4‑010378 Correction of the version number of Recommendation ITU-R SM.329 used as a reference for spurious emissions specifications - -
R4‑010379 - - -
R4‑010380 - - -
R4‑010381 - - -
R4‑010382 - - -
R4‑010383 - - -
R4‑010384 RACH performance requirements - -
R4‑010385 UL Performance requirement in fast fading - -
R4‑010386 Handling of Test Tolerances - Clause 5 "General test conditions and declarations" - -
R4‑010387 Handling of Test Tolerances - Clause 6 "Transmitter characteristics" - -
R4‑010388 Handling of Test Tolerances - Clause 7 "Receiver characteristics" - -
R4‑010389 Correction of the cell-reselection and handover requirements in connected mode. - -
R4‑010390 Change and completion of the cell-reselection requirements in CELL-FACH state. - -
R4‑010391 - - -
R4‑010392 Modification of soft handover requirements - -
R4‑010393 Correction of the FDD/TDD handover requirement in connected mode. - -
R4‑010394 - - -
R4‑010395 - - -
R4‑010396 - - -
R4‑010397 - - -
R4‑010398 - - -
R4‑010399 - - -
R4‑010400 - - -
R4‑010401 - - -
R4‑010402 - - -
R4‑010403 - - -
R4‑010404 - - -
R4‑010405 - - -
R4‑010406 - - -
R4‑010407 - - -
R4‑010408 - - -
R4‑010409 Text proposal for EMC for Repeater - -
R4‑010410 - - -
R4‑010412 Removal of square brackets and TBDs from TS 25.101 - -
R4‑010413 Performance requirements for paging channel - -
R4‑010414 - - -
R4‑010416 - - -
R4‑010417 - - -
R4‑010418 - - -
R4‑010419 - - -
R4‑010420 Performance requirement for 250km/h - -
R4‑010421 - - -
R4‑010422 - - -
R4‑010423 UTRA (UE) TDD; Radio transmission and Reception - -
R4‑010424 Receiver Blocking requirement for co-existence with GSM/DCS and co-located base stations - revised. - -
R4‑010425 - - -
R4‑010426 Conditions for BS conformance testing (TDD) - -
R4‑010427 LS on thresholds for PLMN selection lists R4 -
R4‑010429 - - -
R4‑010430 Rx spurious emissions measurement bandwidth in 25.141 - -
R4‑010431 - - -
R4‑010432 UE electromagnetic compatibility (EMC) for 1.28Mcps TDD Option - -
R4‑010433 Inclusion of environmental requirements - -
R4‑010434 Conditions for BS conformance testing (FDD) - -
R4‑010435 - - -
R4‑010436 Chip timing alignment R4 -
R4‑010437 CR to 25.141 for Test Tolerances - -
R4‑010438 Addition of CPICH to Test Model 4 for EVM measurement - -
R4‑010439 Correction of Definition of multi-code OCNS signal - -
R4‑010440 Re-introduction of the SCH period into the EVM / PCDE measurements - -
R4‑010441 - - -
R4‑010442 - - -
R4‑010443 Requirements for Support of Radio Resources Management (TDD) for 1.28Mcps TDD - -
R4‑010444 - - -
R4‑010445 - - -
R4‑010446 UE/UTRAN GPS Timing of Cell Frames for UP - -
R4‑010447 TS25.104 REL 4 - Document structure - -
R4‑010449 - - -
R4‑010450 UE transmit TIming - -
R4‑010451 3GPP vocabulary document TR21.905 R4 -
R4‑010452 Extension of reporting range for UTRAN UL measurements - -
R4‑010453 General Measurement Requirements in CELL_DCH State - -
R4‑010454 Performance requirements for Acquisition Indicator channel - -
R4‑010455 Cell reselection performance - -
R4‑010456 GSM Measurements - -
R4‑010459 BS EVM definition - -
R4‑010460 Clarifications of TDD measurements and the use of compressed mode pattern for TDD measurements. - -
R4‑010461 Performance requirement for 250km/h - -
R4‑010462 - - -
R4‑010464 - - -
R4‑010465 - - -
R4‑010466 REL 4 Document restructure and changes - -
R4‑010467 Measurements on GSM in Cell-FACH state - -
R4‑010468 Cell re-selection in Cell-FACH state - -
R4‑010469 Measurements on FDD and TDD in Cell-FACH state - -
R4‑010470 Implementation of Test Tolerances (Receiver part) - -
R4‑010471 LS Answer on Introduction of Uplink Power Control at Power Control Limits R4 -
R4‑010472 - - -

page generated from database: 2024-04-13 13:51:47

Get news. Get knowledge. Get involved
Get news.
Get knowledge.
Get involved.
Image
The 5G Standard
3GPP General Enquiries:
info@3gpp.org 


Connect:

Quick Links