The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R4-38 - 2006-02-13 to 2006-02-17, Denver

meeting id: R4-38 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R4‑060001 - - -
R4‑060002 - - -
R4‑060003 Introduction of measurement performance requirements for Band III/IX UE - -
R4‑060004 Additional UARFCN correction - -
R4‑060005 - - -
R4‑060006 - - -
R4‑060007 - - -
R4‑060008 - - -
R4‑060009 - - -
R4‑060010 - - -
R4‑060011 - - -
R4‑060012 - - -
R4‑060013 - - -
R4‑060014 - - -
R4‑060015 - - -
R4‑060016 - - -
R4‑060017 - - -
R4‑060018 - - -
R4‑060019 - - -
R4‑060020 - - -
R4‑060021 Modifications to HSDPA test parameters for 1.28Mcps TDD - -
R4‑060022 Modifications to HSDPA test parameters for 1.28Mcps TDD - -
R4‑060023 Introduction of Timing Advance Test Case - -
R4‑060024 Correction of channel number in TDD/FDD cell re-selection test case for 1.28Mcps TDD - -
R4‑060025 Radiated Emission Test method - -
R4‑060026 Radiated Emission Test method - -
R4‑060027 - - -
R4‑060028 Test case for MTCH reception and mobility requirements in Cell-PCH state - -
R4‑060029 Test case for MTCH reception and mobility requirements in Cell-PCH state - -
R4‑060030 Introduction of operating band III requirements in 25.106 - -
R4‑060031 Introduction of operating band III to VI requirements in 25.106 - -
R4‑060032 Introduction of operating band III to IX requirements in 25.106 - -
R4‑060033 Introduction of operating band III requirements in 25.143 - -
R4‑060034 Introduction of operating band III to VI requirements in 25.143 - -
R4‑060035 Introduction of operating band III to IX requirements in 25.143 - -
R4‑060036 - - -
R4‑060037 - - -
R4‑060038 Clarifications on birth/death propagation channel for BS with receiver diversity - -
R4‑060039 Clarifications on birth/death propagation channel for BS with receiver diversity - -
R4‑060040 Clarifications on moving and birth/death propagation channels for BS with receiver diversity - -
R4‑060041 Clarifications on moving and birth/death propagation channels for BS with receiver diversity - -
R4‑060042 - - -
R4‑060043 - - -
R4‑060044 - - -
R4‑060045 - - -
R4‑060046 Correction of the regional requirement on BS classification - -
R4‑060047 Correction of the regional requirement on BS classification - -
R4‑060048 Correction of the regional requirement on BS classification - -
R4‑060049 Correction of the regional requirement on BS classification - -
R4‑060050 Error Vector Magnitude for E-DCH - -
R4‑060051 Error Vector Magnitude for E-DCH - -
R4‑060052 - - -
R4‑060053 Time Mask Requirements for E-DCH - -
R4‑060054 Time Mask Requirements for E-DCH - -
R4‑060055 - - -
R4‑060056 - - -
R4‑060057 Correction of the reference to 25.104 - -
R4‑060058 Correction of the reference to 25.104 - -
R4‑060059 - - -
R4‑060060 - - -
R4‑060061 - - -
R4‑060062 Requirements for cross-band measurements - -
R4‑060063 - - -
R4‑060064 - - -
R4‑060065 - - -
R4‑060066 - - -
R4‑060067 - - -
R4‑060068 - - -
R4‑060069 - - -
R4‑060070 - - -
R4‑060071 - - -
R4‑060072 - - -
R4‑060073 - - -
R4‑060074 - - -
R4‑060075 - - -
R4‑060076 - - -
R4‑060077 Extended Propagation delay and RTT requirements for large cell size - -
R4‑060078 Extended Propagation delay and RTT requirements for large cell size - -
R4‑060079 - - -
R4‑060080 - - -
R4‑060081 - - -
R4‑060082 UE Power Headroom Measurement Accuracy - -
R4‑060083 UE Power Headroom Measurement Accuracy - -
R4‑060084 UE Power Headroom Measurement Reporting Delay - -
R4‑060085 UE Power Headroom Measurement Reporting Delay - -
R4‑060086 - - -
R4‑060087 Minimum performance requirements for MBMS testing of 80 ms TTI - -
R4‑060088 Minimum performance requirements for MBMS testing of 80 ms TTI - -
R4‑060089 - - -
R4‑060090 - - -
R4‑060091 Clarification for testing of receiver diversity terminals - -
R4‑060092 Clarification for testing of receiver diversity terminals - -
R4‑060093 - - -
R4‑060094 Requirement for HS-DSCH cell change - -
R4‑060095 Requirement for HS-DSCH cell change - -
R4‑060096 Testcase for HS-DSCH cell change - -
R4‑060097 Testcase for HS-DSCH cell change - -
R4‑060098 - - -
R4‑060099 Correction of a reference to Table A.22.A in 25.101. - -
R4‑060100 Correction of a reference to Table A.22.A in 25.101. - -
R4‑060101 - - -
R4‑060102 - - -
R4‑060103 - - -
R4‑060104 Frequency range for RF Immunity - -
R4‑060105 Frequency range for RF Immunity - -
R4‑060106 Frequency range for RF Immunity - -
R4‑060107 Frequency range for RF Immunity - -
R4‑060108 Correction of tables and references in 25.141 - -
R4‑060109 Correction of tables and references in 25.141 - -
R4‑060110 Liaison Statement on Radiated emission requirements for IMT-2000 R4 -
R4‑060111 - - -
R4‑060112 - - -
R4‑060113 - - -
R4‑060114 Specification of enhanced performance requirements type 3 for HSDPA based on receiver diversity and chip level equaliser. - -
R4‑060115 - - -
R4‑060116 - - -
R4‑060117 - - -
R4‑060118 - - -
R4‑060119 Correction of spurious emissions for coexistence with GSM900 in same geographic area - -
R4‑060120 Correction of spurious emissions for coexistence with GSM900 in same geographic area - -
R4‑060121 - - -
R4‑060122 - - -
R4‑060123 - - -
R4‑060124 - - -
R4‑060125 - - -
R4‑060126 - - -
R4‑060127 - - -
R4‑060128 - - -
R4‑060129 - - -
R4‑060130 - - -
R4‑060131 - - -
R4‑060132 - - -
R4‑060133 - - -
R4‑060134 - - -
R4‑060135 - - -
R4‑060136 - - -
R4‑060137 - - -
R4‑060138 - - -
R4‑060139 - - -
R4‑060140 - - -
R4‑060141 - - -
R4‑060142 - - -
R4‑060143 - - -
R4‑060144 - - -
R4‑060145 - - -
R4‑060146 MBMS Requirements for MCCH & MTCH channels - -
R4‑060147 - - -
R4‑060148 Correction to TDD/TDD, TDD/FDD, TDD/GSM handover test cases - -
R4‑060149 - - -
R4‑060150 - - -
R4‑060151 New test scenario: UTRAN to GSM reselection in Idle mode with SIB18 present - -
R4‑060152 - - -
R4‑060153 - - -
R4‑060154 - - -
R4‑060155 - - -
R4‑060156 - - -
R4‑060157 - - -
R4‑060158 Correction of test requirement in the Combined Interfrequency and GSM measurements testcase - -
R4‑060159 Correction of test requirement in the Combined Interfrequency and GSM measurements testcase - -
R4‑060160 - - -
R4‑060161 - - -
R4‑060162 - - -
R4‑060163 Changes to E-TFC restriction requirements - -
R4‑060164 Changes to E-TFC restriction requirements - -
R4‑060165 - - -
R4‑060166 Corrections to E-TFC Restriction requirements - -
R4‑060167 - - -
R4‑060168 - - -
R4‑060169 - - -
R4‑060170 - - -
R4‑060171 - - -
R4‑060172 - - -
R4‑060173 - - -
R4‑060174 Band VIII TX spurious emission - -
R4‑060175 - - -
R4‑060176 - - -
R4‑060177 UE maximum output, power with HS-DPCCH and E-DCH - -
R4‑060178 UE maximum output, power with HS-DPCCH and E-DCH - -
R4‑060179 - - -
R4‑060180 - - -
R4‑060181 - - -
R4‑060182 - - -
R4‑060184 Correction for UMTS1700 requirements - -
R4‑060185 - - -
R4‑060186 - - -
R4‑060187 - - -
R4‑060188 - - -
R4‑060189 - - -
R4‑060190 MBMS Requirements for MCCH & MTCH channels - -
R4‑060191 - - -
R4‑060192 - - -
R4‑060193 - - -
R4‑060194 - - -
R4‑060195 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060196 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060197 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060199 Clarification of UE TX timing requirements - -
R4‑060200 Clarification of UE TX timing requirements - -
R4‑060201 - - -
R4‑060202 Addition of code power stability requirements for multi-code transmission - -
R4‑060203 Addition of code power stability requirements for multi-code transmission - -
R4‑060205 - - -
R4‑060206 - - -
R4‑060207 - - -
R4‑060208 - - -
R4‑060209 - - -
R4‑060210 Correction of the regional requirement on BS classification - -
R4‑060211 Correction of the regional requirement on BS classification - -
R4‑060212 Correction of the regional requirement on BS classification - -
R4‑060213 Correction of the regional requirement on BS classification - -
R4‑060214 - - -
R4‑060215 - - -
R4‑060216 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060217 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060218 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060219 - - -
R4‑060220 - - -
R4‑060221 - - -
R4‑060222 - - -
R4‑060223 - - -
R4‑060224 Clarifications on birth/death propagation channel for BS with receiver diversity - -
R4‑060225 Clarifications on birth/death propagation channel for BS with receiver diversity - -
R4‑060226 Clarifications on moving and birth/death propagation channels for BS with receiver diversity - -
R4‑060227 Clarifications on moving and birth/death propagation channels for BS with receiver diversity - -
R4‑060228 Introduction of operating band III to VI requirements in 25.106 - -
R4‑060229 Introduction of operating band III to IX requirements in 25.106 - -
R4‑060230 Introduction of operating band III to VI requirements in 25.143 - -
R4‑060231 Introduction of operating band III to IX requirements in 25.143 - -
R4‑060232 Correction of spurious emissions for coexistence with GSM900 in same geographic area - -
R4‑060233 Correction of spurious emissions for coexistence with GSM900 in same geographic area - -
R4‑060234 - - -
R4‑060235 - - -
R4‑060236 - - -
R4‑060237 - - -
R4‑060238 Frequency range for RF Immunity - -
R4‑060239 Frequency range for RF Immunity - -
R4‑060240 Correction of tables and references in 25.141 - -
R4‑060241 Correction of tables and references in 25.141 - -
R4‑060242 - - -
R4‑060243 - - -
R4‑060244 Clarification for testing of receiver diversity terminals - -
R4‑060245 Clarification for testing of receiver diversity terminals - -
R4‑060246 - - -
R4‑060247 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060248 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060249 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060250 Modifications to HSDPA test parameters for 1.28Mcps TDD - -
R4‑060251 Modifications to HSDPA test parameters for 1.28Mcps TDD - -
R4‑060252 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060253 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060254 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060255 Correction of test requirement in the Combined Interfrequency and GSM measurements testcase - -
R4‑060256 Correction of test requirement in the Combined Interfrequency and GSM measurements testcase - -
R4‑060257 New test scenario: UTRAN to GSM reselection in Idle mode with SIB18 present - -
R4‑060258 New test scenario: UTRAN to GSM reselection in Idle mode with SIB18 present - -
R4‑060259 - - -
R4‑060260 - - -
R4‑060261 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060262 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060263 Correction to inter RAT cell re-selection test case for 1.28Mcps TDD - -
R4‑060264 - - -
R4‑060265 - - -
R4‑060266 - - -
R4‑060267 - - -
R4‑060268 Addition of code power stability requirements for multi-code transmission - -
R4‑060269 Addition of code power stability requirements for multi-code transmission - -
R4‑060270 - - -
R4‑060271 - - -
R4‑060272 - - -
R4‑060273 UE maximum output, power with HS-DPCCH and E-DCH - -
R4‑060274 UE maximum output, power with HS-DPCCH and E-DCH - -
R4‑060275 Changes to E-TFC restriction requirements - -
R4‑060276 Changes to E-TFC restriction requirements - -
R4‑060277 Minimum performance requirements for MBMS testing of 80 ms TTI - -
R4‑060278 Minimum performance requirements for MBMS testing of 80 ms TTI - -
R4‑060279 Test case for MTCH reception and mobility requirements in Cell-PCH state - -
R4‑060280 Test case for MTCH reception and mobility requirements in Cell-PCH state - -
R4‑060281 Introduction of operating band III requirements in 25.106 - -
R4‑060282 Introduction of operating band III to VI requirements in 25.106 - -
R4‑060283 Introduction of operating band III to IX requirements in 25.106 - -
R4‑060284 Introduction of operating band III requirements in 25.143 - -
R4‑060285 Introduction of operating band III to VI requirements in 25.143 - -
R4‑060286 Introduction of operating band III to IX requirements in 25.143 - -
R4‑060287 Correction of spurious emissions for coexistence with GSM900 in same geographic area - -
R4‑060288 Correction of spurious emissions for coexistence with GSM900 in same geographic area - -
R4‑060289 - - -
R4‑060290 - - -
R4‑060291 Correction of tables and references in 25.141 - -
R4‑060292 Correction of tables and references in 25.141 - -
R4‑060293 Correction of test requirement in the Combined Interfrequency and GSM measurements testcase - -
R4‑060294 Correction of test requirement in the Combined Interfrequency and GSM measurements testcase - -
R4‑060295 - - -
R4‑060296 - - -
R4‑060297 - - -
R4‑060298 - - -
R4‑060299 Clarification of HS-SCCH performance requirements - -
R4‑060300 Clarification of HS-SCCH performance requirements - -
R4‑060301 - - -
R4‑060302 - - -
R4‑060303 Requirement for HS-DSCH cell change - -
R4‑060304 Requirement for HS-DSCH cell change - -
R4‑060305 Testcase for HS-DSCH cell change - -
R4‑060306 Testcase for HS-DSCH cell change - -
R4‑060307 - - -
R4‑060308 - - -
R4‑060309 Corrections of tables and references in 25.104 - -
R4‑060310 Corrections of tables and references in 25.104 - -
R4‑060311 - - -
R4‑060312 - - -
R4‑060313 - - -
R4‑060314 - - -
R4‑060315 - - -
R4‑060316 - - -
R4‑060317 - - -
R4‑060318 Clarification for testing of receiver diversity terminals - -
R4‑060319 Clarification for testing of receiver diversity terminals - -
R4‑060320 - - -
R4‑060321 - - -
R4‑060322 Band VIII TX spurious emission - -
R4‑060323 - - -
R4‑060324 - - -
R4‑060325 - - -
R4‑060326 UPH measurement requirements - -
R4‑060327 UPH measurement requirements - -
R4‑060328 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060329 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060330 Clarification of modulation accuracy requirements for signals containing HS-DPCCH - -
R4‑060331 Addition of code power stability requirements for multi-code transmission - -
R4‑060332 Addition of code power stability requirements for multi-code transmission - -
R4‑060333 Response to LS on input to TS 25.202 R4 -
R4‑060334 - - -
R4‑060335 Deletion of Annex A of 25.133 Rel-4 - -
R4‑060336 - - -
R4‑060337 Correction of test requirement in the Combined Interfrequency and GSM measurements testcase - -
R4‑060338 Correction of test requirement in the Combined Interfrequency and GSM measurements testcase - -
R4‑060339 Correction of CPICH intra-frequency test parameter for band VIII - -
R4‑060340 Clarification of HS-SCCH performance requirements - -
R4‑060341 Clarification of HS-SCCH performance requirements - -
R4‑060342 Specification of enhanced performance requirements type 3 for HSDPA based on receiver diversity and chip level equaliser. - -
R4‑060343 UE maximum output, power with HS-DPCCH and E-DCH - -
R4‑060344 UE maximum output, power with HS-DPCCH and E-DCH - -
R4‑060345 UPH measurement requirements - -
R4‑060346 UPH measurement requirements - -
R4‑060347 - - -
R4‑060348 - - -
R4‑060349 - - -
R4‑060350 - - -
R4‑060351 - - -
R4‑060352 - - -
R4‑060353 - - -
R4‑060354 - - -
R4‑060355 LS on LTE Channel Models and simulations R4 -
R4‑060356 - - -
R4‑060357 - - -
R4‑060358 UPH measurement requirements - -
R4‑060359 UPH measurement requirements - -
R4‑060360 Response LS to RAN2 on UE Power Headroom R4 -
R4‑060361 Requirement for HS-DSCH cell change - -
R4‑060362 Requirement for HS-DSCH cell change - -
R4‑060363 - - -
R4‑060364 - - -
R4‑060365 - - -
R4‑060366 - - -

page generated from database: 2019-12-06 10:39:20