The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R4-36 - 2005-08-29 to 2005-09-02, London

meeting id: R4-36 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R4‑050612 - - -
R4‑050613 - - -
R4‑050614 Correction of Compressed Mode Patterns for BSIC identification - -
R4‑050615 Correction of Compressed Mode Patterns for BSIC identification - -
R4‑050616 Correction of Compressed Mode Patterns for BSIC identification - -
R4‑050617 - - -
R4‑050618 - - -
R4‑050619 - - -
R4‑050620 - - -
R4‑050621 - - -
R4‑050622 - - -
R4‑050623 - - -
R4‑050624 - - -
R4‑050625 - - -
R4‑050626 - - -
R4‑050627 - - -
R4‑050628 - - -
R4‑050629 - - -
R4‑050630 Modification of the protection band for PHS - -
R4‑050631 Modification of the protection band for PHS - -
R4‑050632 Modification of the protection band for PHS - -
R4‑050633 Modification of the protection band for PHS - -
R4‑050634 Modification of the protection band for PHS - -
R4‑050635 Modification of the protection band for PHS - -
R4‑050636 Modification of the protection band for PHS - -
R4‑050637 Modification of the protection band for PHS - -
R4‑050638 Modification of the protection band for PHS - -
R4‑050639 Modification of the protection band for PHS - -
R4‑050640 Modification of the protection band for PHS - -
R4‑050641 Modification of the protection band for PHS - -
R4‑050642 Modification of the protection band for PHS - -
R4‑050643 Modification of the protection band for PHS - -
R4‑050644 Modification of the protection band for PHS - -
R4‑050645 - - -
R4‑050646 - - -
R4‑050647 - - -
R4‑050648 CR for 25.133 on RTWP requirements - -
R4‑050649 CR for 25.133 on RTWP requirements - -
R4‑050650 CR for requirements for non-HSDPA and non-EDCH transmitter carrier power - -
R4‑050651 CR for requirements for non-HSDPA and non-EDCH transmitter carrier power - -
R4‑050652 - - -
R4‑050653 - - -
R4‑050654 Radiated Emission Test method - -
R4‑050655 Radiated Emission Test method - -
R4‑050656 - - -
R4‑050657 - - -
R4‑050658 - - -
R4‑050659 - - -
R4‑050660 CR for 25.104 on EUL - -
R4‑050661 CR for 25.104 on EUL - -
R4‑050662 CR for 25.141 on EUL - -
R4‑050663 CR for 25.141 on EUL - -
R4‑050664 - - -
R4‑050665 - - -
R4‑050666 - - -
R4‑050667 - - -
R4‑050668 - - -
R4‑050669 - - -
R4‑050670 - - -
R4‑050671 - - -
R4‑050672 - - -
R4‑050673 - - -
R4‑050674 - - -
R4‑050677 - - -
R4‑050678 - - -
R4‑050679 Revision of "New requirements Timing-maintained hard handover" - -
R4‑050680 Revision of "New requirements Timing-maintained hard handover" - -
R4‑050681 Correction to HSDPA test parameters for LCR TDD - -
R4‑050682 Correction to HSDPA test parameters for LCR TDD - -
R4‑050683 Clarification on Section 4 filtering requirements for LCR TDD - -
R4‑050684 Correction of test signal for transmit intermodulation - -
R4‑050685 Correction of test signal for transmit intermodulation - -
R4‑050686 Correction of test signal for transmit intermodulation - -
R4‑050690 Revision of additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑050691 Revision of additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑050694 Revision of additional spurious emissions and additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑050695 Revision of additional spurious emissions and additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑050696 Revision of additional spurious emissions and additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑050697 Revision of additional spurious emissions and additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑050698 Introduction of UMTS 2.6GHz operating band for TDD - -
R4‑050699 Introduction of UMTS 2.6 GHz operating band for TDD - -
R4‑050700 Introduction of UMTS 2.6 GHz operating band for TDD - -
R4‑050701 UMTS 2.6 GHz TDD Propagation Conditions - -
R4‑050702 UMTS 2.6 GHz TDD Propagation Conditions - -
R4‑050703 UMTS 2.6 GHz TDD Propagation Conditions - -
R4‑050704 UMTS 2.6 GHz TDD UE Receiver Specifications - -
R4‑050705 Channel Raster and UARFCN for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050706 Channel Raster for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050707 Channel Raster for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050708 - - -
R4‑050709 - - -
R4‑050710 - - -
R4‑050711 - - -
R4‑050712 - - -
R4‑050713 - - -
R4‑050714 - - -
R4‑050715 - - -
R4‑050716 - - -
R4‑050717 UMTS 2.6 GHz TDD BS Transmitter Specifications - -
R4‑050718 UMTS 2.6 GHz TDD BS Transmitter Specifications - -
R4‑050719 UMTS 2.6 GHz TDD BS Receiver Specifications - -
R4‑050720 UMTS 2.6 GHz TDD BS Receiver Specifications - -
R4‑050721 - - -
R4‑050722 - - -
R4‑050723 - - -
R4‑050724 - - -
R4‑050725 - - -
R4‑050726 - - -
R4‑050727 - - -
R4‑050728 - - -
R4‑050729 - - -
R4‑050730 - - -
R4‑050731 - - -
R4‑050732 - - -
R4‑050733 Correction of additional Spectrum Emission Mask Requirements - -
R4‑050734 Correction of additional Spectrum Emission Mask Requirements - -
R4‑050735 Correction of additional Spectrum Emission Mask Requirements - -
R4‑050736 Correction of Spectrum Emission Mask Test Requirement - -
R4‑050737 Correction of Spectrum Emission Mask Test Requirement - -
R4‑050738 Correction of Spectrum Emission Mask Test Requirement - -
R4‑050739 Correction of tests with extreme power conditions - -
R4‑050740 Correction of tests with extreme power conditions - -
R4‑050741 - - -
R4‑050742 - - -
R4‑050743 Clarification of the test procedure for total power dynamic range - -
R4‑050744 Clarification of the test procedure for total power dynamic range - -
R4‑050745 - - -
R4‑050746 - - -
R4‑050747 - - -
R4‑050748 - - -
R4‑050749 - - -
R4‑050750 - - -
R4‑050751 - - -
R4‑050752 - - -
R4‑050753 - - -
R4‑050754 - - -
R4‑050755 - - -
R4‑050756 - - -
R4‑050757 - - -
R4‑050758 - - -
R4‑050759 - - -
R4‑050760 - - -
R4‑050761 - - -
R4‑050762 - - -
R4‑050763 - - -
R4‑050764 - - -
R4‑050765 - - -
R4‑050766 - - -
R4‑050767 - - -
R4‑050768 - - -
R4‑050769 - - -
R4‑050770 - - -
R4‑050771 - - -
R4‑050772 - - -
R4‑050773 - - -
R4‑050774 - - -
R4‑050775 - - -
R4‑050776 - - -
R4‑050777 - - -
R4‑050778 - - -
R4‑050779 - - -
R4‑050780 - - -
R4‑050781 Correction of Spurious emissions requirement - -
R4‑050782 Correction of Spurious emissions requirement - -
R4‑050783 ACLR requirement for Local BS - -
R4‑050784 ACLR requirement for Local BS - -
R4‑050785 ACLR requirement for Local BS - -
R4‑050786 ACLR requirement for Local BS - -
R4‑050787 - - -
R4‑050788 - - -
R4‑050789 - - -
R4‑050790 - - -
R4‑050791 - - -
R4‑050792 Modification of DTCH BLER target in RRM hard handover test cases - -
R4‑050793 Modification of DTCH BLER target in RRM hard handover test cases - -
R4‑050794 Modification of DTCH BLER target in RRM hard handover test cases - -
R4‑050795 Modification of DTCH BLER target in RRM hard handover test cases - -
R4‑050796 Modification of DTCH BLER target in RRM hard handover test cases - -
R4‑050797 - - -
R4‑050798 Requirement to identify cells for MTCH combining purposes in idle mode/CELL_PCH/URA_PCH - -
R4‑050799 Requirement to identify cells for MTCH combining purposes in idle mode/CELL_PCH/URA_PCH - -
R4‑050800 Requirement to combine identified cells for MTCH in cell_FACH state - -
R4‑050801 Requirement to combine identified cells for MTCH in cell_FACH state - -
R4‑050802 - - -
R4‑050803 Modification of UTRA carrier RSSI relative accuracy testcase to use 3 cells and carrier frequencies - -
R4‑050804 Modification of UTRA carrier RSSI relative accuracy testcase to use 3 cells and carrier frequencies - -
R4‑050805 - - -
R4‑050806 UTRA Carrier RSSI relative accuracy - -
R4‑050807 UTRA Carrier RSSI relative accuracy - -
R4‑050808 - - -
R4‑050809 UTRA Carrier RSSI relative accuracy - -
R4‑050810 UTRA Carrier RSSI relative accuracy - -
R4‑050811 - - -
R4‑050812 - - -
R4‑050813 PRACH Burst timing Accuracy - -
R4‑050814 - - -
R4‑050815 - - -
R4‑050816 - - -
R4‑050817 - - -
R4‑050818 - - -
R4‑050819 - - -
R4‑050820 - - -
R4‑050821 - - -
R4‑050822 - - -
R4‑050823 - - -
R4‑050824 - - -
R4‑050825 - - -
R4‑050826 UE performance requirements for E-DCH DL signalling channels - -
R4‑050827 - - -
R4‑050828 Specification of enhanced performance requirements type 2 for HSDPA with CL transmit diversity based on chip level equaliser - -
R4‑050829 - - -
R4‑050830 - - -
R4‑050831 - - -
R4‑050832 - - -
R4‑050833 - - -
R4‑050834 - - -
R4‑050835 - - -
R4‑050836 - - -
R4‑050837 Correction of receiver spurious emission requirements - -
R4‑050838 Correction of receiver spurious emission requirements - -
R4‑050839 Correction of receiver spurious emission requirements - -
R4‑050840 Correction of receiver spurious emission requirements - -
R4‑050841 - - -
R4‑050842 - - -
R4‑050843 - - -
R4‑050844 - - -
R4‑050846 - - -
R4‑050847 Introduction of UMTS 2.6 GHz new operating band for 1.28Mcps TDD - -
R4‑050848 Introduction of Propagation Conditions for UMTS 2.6 GHz for 1.28Mcps TDD - -
R4‑050849 Introduction of Propagation Conditions for UMTS 2.6 GHz for 1.28Mcps TDD - -
R4‑050850 Introduction of Propagation Conditions for UMTS 2.6 GHz for 1.28Mcps TDD - -
R4‑050851 Introduction of UMTS 2.6 GHz requirements for blocking and spurious emission of UE receiver for 1.28Mcps TDD - -
R4‑050852 Introduction of UMTS 2.6 GHz requirements in 25.113 - -
R4‑050853 - - -
R4‑050854 - - -
R4‑050855 - - -
R4‑050856 - - -
R4‑050857 - - -
R4‑050858 - - -
R4‑050859 - - -
R4‑050860 - - -
R4‑050861 - - -
R4‑050862 - - -
R4‑050863 - - -
R4‑050864 - - -
R4‑050865 - - -
R4‑050866 - - -
R4‑050867 - - -
R4‑050868 - - -
R4‑050869 - - -
R4‑050870 - - -
R4‑050871 - - -
R4‑050872 E-TFC selection in the UE - -
R4‑050873 E-TFC selection in the UE - -
R4‑050874 Maximum size of active set for HSUPA - -
R4‑050875 Maximum size of active set for HSUPA - -
R4‑050876 - - -
R4‑050877 - - -
R4‑050878 - - -
R4‑050879 - - -
R4‑050880 - - -
R4‑050881 - - -
R4‑050882 - - -
R4‑050883 - - -
R4‑050884 - - -
R4‑050885 - - -
R4‑050886 - - -
R4‑050887 - - -
R4‑050888 - - -
R4‑050889 - - -
R4‑050890 - - -
R4‑050891 - - -
R4‑050892 - - -
R4‑050893 - - -
R4‑050894 - - -
R4‑050895 - - -
R4‑050896 - - -
R4‑050897 - - -
R4‑050898 - - -
R4‑050899 - - -
R4‑050900 - - -
R4‑050901 - - -
R4‑050902 - - -
R4‑050903 - - -
R4‑050904 - - -
R4‑050905 - - -
R4‑050906 - - -
R4‑050907 - - -
R4‑050908 - - -
R4‑050909 - - -
R4‑050910 - - -
R4‑050911 - - -
R4‑050912 - - -
R4‑050914 CR for UE Power Headroom Measurement Requirements - -
R4‑050915 CR for UE Power Headroom Measurement Requirements - -
R4‑050916 - - -
R4‑050917 Clarification of modulation accuracy requirements for HS-DPCCH - -
R4‑050918 Clarification of modulation accuracy requirements for HS-DPCCH - -
R4‑050919 Clarification of modulation accuracy requirements for HS-DPCCH - -
R4‑050920 - - -
R4‑050921 Addition of code power stability requirements for multi-code transmission - -
R4‑050922 Addition of code power stability requirements for multi-code transmission - -
R4‑050923 Clarification of UE TX timing requirements - -
R4‑050924 Clarification of UE TX timing requirements - -
R4‑050925 Clarification of BLER for CQI under fading - -
R4‑050926 Clarification of BLER for CQI under fading - -
R4‑050927 - - -
R4‑050928 - - -
R4‑050929 - - -
R4‑050930 - - -
R4‑050931 - - -
R4‑050932 - - -
R4‑050933 - - -
R4‑050934 - - -
R4‑050935 - - -
R4‑050936 - - -
R4‑050937 - - -
R4‑050938 - - -
R4‑050939 - - -
R4‑050940 - - -
R4‑050941 - - -
R4‑050942 - - -
R4‑050943 - - -
R4‑050944 - - -
R4‑050945 - - -
R4‑050946 - - -
R4‑050947 - - -
R4‑050948 - - -
R4‑050949 - - -
R4‑050950 Reply LS to RAN5 on compressed mode pattern for Inter-frequency and Inter-RAT for functional testing R4 -
R4‑050951 Reply LS on BLER testing in MBMS R4 -
R4‑050952 Changes to GPS scenarios - -
R4‑050953 - - -
R4‑050954 UTRA Carrier RSSI relative accuracy - -
R4‑050955 UTRA Carrier RSSI relative accuracy - -
R4‑050956 Response LS to RAN WG5 on the SS behavior in Downlink Power Control Test cases R4 -
R4‑050957 Channel Raster and UARFCN for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050958 Channel Raster for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050959 Channel Raster for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050960 Requirement to combine identified cells for MTCH in cell_FACH state - -
R4‑050961 Requirement to combine identified cells for MTCH in cell_FACH state - -
R4‑050962 - - -
R4‑050963 CR for 25.104 on EUL - -
R4‑050964 CR for 25.104 on EUL - -
R4‑050965 CR for 25.141 on EUL - -
R4‑050966 CR for 25.141 on EUL - -
R4‑050967 - - -
R4‑050968 - - -
R4‑050969 - - -
R4‑050970 Channel Raster and UARFCN for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050971 Channel Raster for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050972 Channel Raster for 3.84 Mcps TDD in UMTS 2.6 GHz - -
R4‑050973 CR for 25.133 on RTWP requirements - -
R4‑050974 CR for 25.133 on RTWP requirements - -
R4‑050975 - - -
R4‑050976 - - -
R4‑050977 Specification of enhanced performance requirements type 2 for HSDPA with CL transmit diversity based on chip level equaliser - -
R4‑050978 UE performance requirements for E-DCH DL signalling channels - -
R4‑050979 UMTS 2.6 GHz TDD BS receiver spurious emission - -
R4‑050980 UMTS 2.6 GHz TDD BS receiver spurious emission - -
R4‑050981 - - -
R4‑050982 - - -
R4‑050983 - - -
R4‑050984 - - -
R4‑050985 - - -
R4‑050986 - - -
R4‑050987 Correction of band VII receiver exclusion band - -
R4‑050988 - - -
R4‑050989 - - -
R4‑050990 - - -
R4‑050991 MBMS p-t-m RB setup activation time delay requirement - -
R4‑050992 - - -
R4‑050993 - - -
R4‑050994 - - -
R4‑050995 - - -
R4‑050996 - - -
R4‑050997 Changes to GPS scenarios - -
R4‑050998 - - -
R4‑050999 - - -
R4‑051000 - - -
R4‑051001 Modification of the protection band for PHS - -
R4‑051002 Modification of the protection band for PHS - -
R4‑051003 Modification of the protection band for PHS - -
R4‑051004 Modification of the protection band for PHS - -
R4‑051005 Modification of the protection band for PHS - -
R4‑051006 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051007 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051008 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051009 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051010 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051011 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051012 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051013 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051014 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051015 Clarification of “12.5MHz rule” and modification of the protection band for PHS - -
R4‑051016 Revision of additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑051017 Revision of additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑051018 Revision of additional spurious emissions and additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑051019 Revision of additional spurious emissions and additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑051020 Revision of additional spurious emissions and additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑051021 Revision of additional spurious emissions and additional receiver spurious emissions requirements on 800MHz band in Japan - -
R4‑051022 Multi-path propagation condition for Band VI (UMTS800) - -
R4‑051023 Multi-path propagation condition for Band VI (UMTS800) - -
R4‑051024 - - -
R4‑051025 - - -
R4‑051026 - - -
R4‑051027 Mobility requirements for MBMS - -
R4‑051028 Mobility requirements for MBMS - -
R4‑051029 - - -
R4‑051030 Modification of DTCH BLER target in RRM hard handover test cases - -
R4‑051031 Modification of DTCH BLER target in RRM hard handover test cases - -
R4‑051032 - - -
R4‑051033 - - -
R4‑051034 - - -
R4‑051035 - - -
R4‑051036 - - -
R4‑051037 - - -
R4‑051038 - - -
R4‑051039 LS on Summary of Chapters in TS 25.461 to be put under RAN4 mandate R4 -
R4‑051040 - - -
R4‑051041 > 5 MHz Channel Models for E-UTRA R4 -
R4‑051042 Clarification of BLER for CQI under fading - -
R4‑051043 Clarification of BLER for CQI under fading - -
R4‑051044 Clarification of UE TX timing requirements - -
R4‑051045 Clarification of UE TX timing requirements - -
R4‑051046 REPLY LS on ‘Final Submission’ for UTRA FDD and TDD toward Revision 6 of Recommendation ITU-R M.1457 R4 -
R4‑051047 PRACH burst timing test - -
R4‑051048 PRACH burst timing test - -
R4‑051049 Deletion of Annex A - -
R4‑051050 - - -
R4‑051051 - - -
R4‑051052 BS performance requirements for EDCH Uplink channels - -
R4‑051053 BS performance requirements for EDCH Uplink channels - -
R4‑051054 BS performance requirements for EDCH Uplink channels - -
R4‑051055 BS performance requirements for EDCH Uplink channels - -
R4‑051056 CR for requirements for non-HSDPA and non-EDCH transmitter carrier power - -
R4‑051057 Fractional DPCH DL Power Control test - -
R4‑051058 Fractional DPCH DL Power Control test - -
R4‑051059 Redrafted "minimum requirements" clauses - -
R4‑051060 Redrafted "minimum requirements" clauses - -
R4‑051061 - - -
R4‑051062 - - -
R4‑051063 - - -
R4‑051064 - - -
R4‑051065 E-TFC selection in the UE - -
R4‑051066 E-TFC selection in the UE - -
R4‑051067 - - -
R4‑051068 LS on R4 -
R4‑051069 - - -
R4‑051070 - - -
R4‑051071 - - -
R4‑051072 - - -

page generated from database: 2019-08-20 08:43:13