The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R4-26 - 2003-02-17 to 2003-02-21, Madrid

meeting id: R4-26 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R4‑030001 - - -
R4‑030002 - - -
R4‑030003 - - -
R4‑030004 - - -
R4‑030005 - - -
R4‑030006 - - -
R4‑030007 - - -
R4‑030008 - - -
R4‑030009 - - -
R4‑030010 - - -
R4‑030011 - - -
R4‑030012 Correction of interruption time in FDD/TDD Hard Handover - -
R4‑030013 Correction of interruption time in FDD/TDD Hard Handover - -
R4‑030014 Correction of interruption time in FDD/TDD Hard Handover - -
R4‑030015 Correction of interruption time in FDD/TDD Hard Handover - -
R4‑030016 Correction of interruption time in TDD Hard Handover - -
R4‑030017 Correction of interruption time in TDD Hard Handover - -
R4‑030018 Correction of interruption time in TDD Hard Handover - -
R4‑030019 Correction of interruption time in TDD Hard Handover - -
R4‑030020 Correction of interruption time in TDD Hard Handover - -
R4‑030021 Applicability of Timer T-reselection for 2G cell reselection. - -
R4‑030022 Applicability of Timer T-reselection for 2G cell reselection. - -
R4‑030023 Applicability of Timer T-reselection for 2G cell reselection. - -
R4‑030024 Applicability of Timer T-reselection for 2G cell reselection. - -
R4‑030025 - - -
R4‑030026 - - -
R4‑030027 - - -
R4‑030028 - - -
R4‑030029 CR to 25.101, Addition of requirement of CSICH demodulation when CA is active. - -
R4‑030030 TDD-GSM co-existence in the same geographic area - -
R4‑030031 TDD-GSM co-existence in the same geographic area - -
R4‑030032 TDD-GSM co-existence in the same geographic area - -
R4‑030033 TDD-GSM co-existence in the same geographic area - -
R4‑030034 TDD-GSM co-existence in the same geographic area - -
R4‑030035 TDD-GSM co-existence in the same geographic area - -
R4‑030036 Spurious emission requirements for unsynchronized TDD operation - -
R4‑030037 Spurious emission requirements for unsynchronized TDD operation - -
R4‑030038 Spurious emission requirements for unsynchronized TDD operation - -
R4‑030039 Correction to BS configurations - -
R4‑030040 - - -
R4‑030041 Correction to radiated spurious emission measurement bandwidth - -
R4‑030042 UTRAN measurements SIR and SIR error - -
R4‑030043 UTRAN measurements SIR and SIR error - -
R4‑030044 UTRAN measurement RTT - -
R4‑030045 UTRAN measurement RTT - -
R4‑030046 - - -
R4‑030047 Total received power density definition for TDD BS - -
R4‑030048 Total received power density definition for TDD BS - -
R4‑030049 Transmitted code power accuracy - -
R4‑030050 Transmitted code power accuracy - -
R4‑030051 Transmitted code power accuracy - -
R4‑030052 UE Timer accuracy for TDD - -
R4‑030053 UE Timer accuracy for TDD - -
R4‑030054 UE Timer accuracy for TDD - -
R4‑030055 - - -
R4‑030056 - - -
R4‑030057 - - -
R4‑030058 - - -
R4‑030060 Max UE Input Power during HSDPA reception - -
R4‑030061 - - -
R4‑030062 - - -
R4‑030064 Phase shift due to power steps - -
R4‑030065 Minimum requirements for the UE blocking - -
R4‑030066 Protection of the FDD BS receiver - -
R4‑030067 Protection of the FDD BS receiver - -
R4‑030068 Protection of the FDD BS receiver - -
R4‑030069 Protection of the FDD BS receiver - -
R4‑030070 Clarification of the IPDL Minimum Requirement - -
R4‑030071 Clarification of the IPDL Minimum Requirement - -
R4‑030072 Correction of measurement and reporting capability requirements in CELL_DCH state in case of parallel measurements - -
R4‑030073 Correction of measurement and reporting capability requirements in CELL_DCH state in case of parallel measurements - -
R4‑030074 Correction of measurement and reporting capability requirements in CELL_DCH state in case of parallel measurements - -
R4‑030076 Correction of Hard HO test case - -
R4‑030077 Correction of Hard HO test case - -
R4‑030078 Cell Identification - -
R4‑030079 Cell Identification - -
R4‑030080 Protection of the FDD BS receiver - -
R4‑030081 Protection of the FDD BS receiver - -
R4‑030082 Protection of the FDD BS receiver - -
R4‑030083 Protection of the FDD BS receiver - -
R4‑030084 Clarification of the IPDL Minimum Requirement - -
R4‑030085 Clarification of the IPDL Minimum Requirement - -
R4‑030086 Assessment of BLER in Uplink for Immunity Test - -
R4‑030087 - - -
R4‑030088 Co-siting requirements for different FDD BS classes - -
R4‑030089 Co-siting requirements for different FDD BS classes - -
R4‑030090 - - -
R4‑030093 - - -
R4‑030094 Maximum output power for Medium Range BS class - -
R4‑030095 Maximum output power for Medium Range BS class - -
R4‑030096 - - -
R4‑030097 - - -
R4‑030098 - - -
R4‑030099 - - -
R4‑030100 FDD GSM co-existence in the Same Geographic Area - -
R4‑030101 FDD GSM co-existence in the Same Geographic Area - -
R4‑030102 FDD GSM co-existence in the Same Geographic Area - -
R4‑030103 FDD GSM co-existence in the Same Geographic Area - -
R4‑030104 Statistical approach for BER BLER tests - -
R4‑030105 Statistical approach for BER BLER tests - -
R4‑030106 - - -
R4‑030107 - - -
R4‑030109 - - -
R4‑030110 - - -
R4‑030111 - - -
R4‑030112 - - -
R4‑030113 - - -
R4‑030114 UE rx-tx time difference type 1 - -
R4‑030115 UE rx-tx time difference type 1 - -
R4‑030116 UE rx-tx time difference type 1 - -
R4‑030117 - - -
R4‑030118 - - -
R4‑030119 - - -
R4‑030120 - - -
R4‑030121 - - -
R4‑030122 - - -
R4‑030124 - - -
R4‑030125 - - -
R4‑030127 - - -
R4‑030128 UTRA-FDD BS Receiver protection - -
R4‑030129 UTRA-FDD BS Receiver protection - -
R4‑030130 UTRA-FDD BS Receiver protection - -
R4‑030131 - - -
R4‑030132 - - -
R4‑030133 - - -
R4‑030134 - - -
R4‑030135 - - -
R4‑030136 Clarification of the W-CDMA interferer definition in BS requirements for ACS and blocking characteristics - -
R4‑030137 Clarification of the W-CDMA interferer definition in BS requirements for ACS and blocking characteristics - -
R4‑030138 Clarification of the W-CDMA interferer definition in BS conformance tests for ACS and blocking characteristics - -
R4‑030139 Clarification of the W-CDMA interferer definition in BS conformance tests for ACS and blocking characteristics - -
R4‑030140 - - -
R4‑030141 Correction to external equipment definition - -
R4‑030142 Correction to external equipment definition - -
R4‑030143 Correction to external equipment definition - -
R4‑030144 Correction to external equipment definition - -
R4‑030145 Correction to external equipment definition - -
R4‑030146 Correction to external equipment definition - -
R4‑030147 - - -
R4‑030148 Correction to external equipment definition - -
R4‑030149 Correction to external equipment definition - -
R4‑030150 Correction to external equipment definition - -
R4‑030151 Correction to external equipment definition - -
R4‑030152 - - -
R4‑030153 - - -
R4‑030154 Correction of Hard HO test case - -
R4‑030155 Correction of Hard HO test case - -
R4‑030156 Cell Identification - -
R4‑030157 Cell Identification - -
R4‑030158 - - -
R4‑030159 - - -
R4‑030160 - - -
R4‑030161 - - -
R4‑030162 Variable TX/RX frequency separation in the 1800 and 1900 bands - -
R4‑030163 Variable TX/RX frequency separation in the 1800 and 1900 bands - -
R4‑030164 Variable TX/RX frequency separation in the 1800 and 1900 bands - -
R4‑030165 - - -
R4‑030166 - - -
R4‑030167 - - -
R4‑030168 - - -
R4‑030171 - - -
R4‑030172 - - -
R4‑030173 - - -
R4‑030174 - - -
R4‑030175 - - -
R4‑030176 PRACH modulation quality - -
R4‑030177 - - -
R4‑030178 - - -
R4‑030179 Specification of HSDPA VRC Performance - -
R4‑030180 Specification of HSDPA VRC Performance - -
R4‑030181 Specification of HSDPA FRC Performance for H-Sets 4 & 5 - -
R4‑030182 Specification of HSDPA FRC Performance with Open Loop Transmit Diversity - -
R4‑030183 Specification of HSDPA FRC Performance with Open Loop Transmit Diversity - -
R4‑030184 Clarification of HSDPA FRC Test Procedure on HS-SCCH Signalling Error - -
R4‑030185 Clarification of HSDPA FRC Test Procedure on HS-SCCH Signalling Error - -
R4‑030187 Changes to TFC selection requirements for codec mode switch - -
R4‑030188 Changes to TFC selection requirements for codec mode switch - -
R4‑030189 - - -
R4‑030190 - - -
R4‑030191 TGPL limitations for inter-frequency measurements - -
R4‑030192 TGPL limitations for inter-frequency measurements - -
R4‑030193 TGPL limitations for inter-frequency measurements - -
R4‑030194 TGPL limitations for inter-frequency measurements - -
R4‑030195 The Closed Loop Timing Adjustment Mode parameter for the transmit diversity performance requirements - -
R4‑030196 The Closed Loop Timing Adjustment Mode parameter for the transmit diversity performance requirements - -
R4‑030197 The Closed Loop Timing Adjustment Mode parameter for the transmit diversity performance requirements - -
R4‑030198 - - -
R4‑030199 - - -
R4‑030201 - - -
R4‑030202 - - -
R4‑030203 Correction of TFC Selection Requirements - -
R4‑030204 Correction of TFC Selection Requirements - -
R4‑030205 Correction of TFC Selection Requirements - -
R4‑030206 Correction of TFC Selection Requirements - -
R4‑030209 - - -
R4‑030210 - - -
R4‑030211 - - -
R4‑030212 - - -
R4‑030213 - - -
R4‑030214 - - -
R4‑030215 - - -
R4‑030216 - - -
R4‑030217 - - -
R4‑030218 - - -
R4‑030219 - - -
R4‑030220 - - -
R4‑030221 - - -
R4‑030222 - - -
R4‑030223 - - -
R4‑030224 - - -
R4‑030225 - - -
R4‑030226 - - -
R4‑030227 - - -
R4‑030228 - - -
R4‑030229 - - -
R4‑030230 - - -
R4‑030231 - - -
R4‑030232 - - -
R4‑030233 Minimum requirements for the UE blocking - -
R4‑030234 Minimum requirements for the UE blocking - -
R4‑030235 Minimum requirements for the UE blocking - -
R4‑030236 - - -
R4‑030237 - - -
R4‑030238 - - -
R4‑030239 - - -
R4‑030240 - - -
R4‑030241 - - -
R4‑030242 - - -
R4‑030243 Correction to PRACH modulation quality - -
R4‑030244 - - -
R4‑030245 Downlink power control during compressed mode tests - -
R4‑030246 Downlink power control during compressed mode tests - -
R4‑030247 Downlink power control during compressed mode tests - -
R4‑030248 Constant Value in Random Access Test requirements - -
R4‑030249 Constant Value in Random Access Test requirements - -
R4‑030250 Constant Value in Random Access Test requirements - -
R4‑030251 Constant Value in Random Access Test requirements - -
R4‑030252 Correction of Transmit Modulation testing for 3,84 Mcps TDD Option - -
R4‑030253 - - -
R4‑030254 - - -
R4‑030255 Response to LS from TSG RAN WG1 on Received Total Wide Band Power Measurement Definition R4 -
R4‑030256 - - -
R4‑030257 - - -
R4‑030258 Clarification of the W-CDMA interferer definition in BS requirements for ACS and blocking characteristics - -
R4‑030259 Addition of requirement of CSICH demodulation when CA is active. - -
R4‑030260 - - -
R4‑030261 Correction of interruption time in TDD Hard Handover - -
R4‑030262 Correction of interruption time in TDD Hard Handover - -
R4‑030263 Clarification of the W-CDMA interferer definition in BS requirements for ACS and blocking characteristics - -
R4‑030264 Clarification of the W-CDMA interferer definition in BS conformance tests for ACS and blocking characteristics - -
R4‑030265 Clarification of the W-CDMA interferer definition in BS conformance tests for ACS and blocking characteristics - -
R4‑030266 - - -
R4‑030267 Specification of HSDPA FRC Performance for H-Sets 4 & 5 - -
R4‑030268 Specification of HSDPA FRC Performance with Open Loop Transmit Diversity - -
R4‑030269 Specification of HSDPA VRC Performance - -
R4‑030270 Clarification of HSDPA FRC Test Procedure on HS-SCCH Signalling Error - -
R4‑030271 REPLY LS on Initial submission for updated UTRA FDD and TDD toward Rev. 4 of Rec. ITU-R M.1457 R4 -
R4‑030272 LS on coexistence Between IMT-2000 TDD and FDD Radio Interface Technologies Within the Frequency Range 2 500-2 690 MHZ Operating in Adjacent Bands and in the Same Geographical Area R4 -
R4‑030273 - - -
R4‑030274 Max UE Input Power during HSDPA reception - -
R4‑030275 Transmit modulation quality clarification - -
R4‑030276 - - -
R4‑030277 Response to LS on a necessary parameter for the test of "Demodulation of DCH in closed loop transmit diversity mode" R4 -
R4‑030278 Correction of UE parameters for Random Access test - -
R4‑030279 Correction of UE parameters for Random Access test - -
R4‑030280 Correction of UE parameters for Random Access test - -
R4‑030281 Correction of UE parameters for Random Access test - -
R4‑030282 - - -
R4‑030283 - - -
R4‑030284 - - -
R4‑030285 - - -
R4‑030286 Variable TX/RX frequency separation in the 1800 and 1900 bands - -
R4‑030287 Variable TX/RX frequency separation in the 1800 and 1900 bands - -
R4‑030288 Variable TX/RX frequency separation in the 1800 and 1900 bands - -
R4‑030289 Statistical approach for BER BLER tests - -
R4‑030290 - - -
R4‑030292 Statistical approach for BER BLER tests - -
R4‑030293 Protection of the FDD BS receiver - -
R4‑030294 Protection of the FDD BS receiver - -
R4‑030295 Protection of the FDD BS receiver - -
R4‑030296 Protection of the FDD BS receiver - -
R4‑030297 The definition of UTRA-FDD BS classes - -
R4‑030298 The definition of UTRA-TDD BS classes - -
R4‑030299 The definition of UTRA-FDD BS classes - -
R4‑030300 The definition of UTRA-TDD BS classes - -
R4‑030301 The definition of UTRA-TDD BS classes - -
R4‑030302 - - -
R4‑030303 - - -
R4‑030304 Maximum output power for Medium Range BS class - -
R4‑030305 Maximum output power for Medium Range BS class - -
R4‑030306 Clarification of HSDPA FRC test procedure on HS-SCCH signalling error - -
R4‑030307 Addition of VRC definition for 3.84 Mcps & 1.28 Mcps TDD in Annex A - -
R4‑030308 - - -
R4‑030309 Additional VRC performance requirement for 1.28 Mcps TDD option - -
R4‑030310 - - -
R4‑030311 - - -
R4‑030313 Introduction of requirements for handling test equipment uncertainty for cell re-selection in CELL_FACH - -
R4‑030314 Protection of the FDD BS receiver - -
R4‑030315 Protection of the FDD BS receiver - -
R4‑030316 Protection of the FDD BS receiver - -
R4‑030317 Protection of the FDD BS receiver - -
R4‑030318 - - -
R4‑030319 Corrections of CPICH_Ec/Io relative measurement accuracy requirement - -
R4‑030320 - - -
R4‑030321 Correction to PCH demodulation test - -
R4‑030322 Correction to PCH demodulation test - -
R4‑030323 - - -
R4‑030324 - - -
R4‑030325 - - -
R4‑030326 - - -
R4‑030327 - - -
R4‑030328 - - -
R4‑030329 - - -
R4‑030330 - - -
R4‑030331 Phase shift due to power steps - -
R4‑030332 - - -
R4‑030333 - - -
R4‑030334 TFC selection requirements for step by step codec mode adaptation - -
R4‑030335 TFC selection requirements for step by step codec mode adaptation (2) - -
R4‑030336 - - -
R4‑030337 - - -
R4‑030338 - - -
R4‑030339 Reply to LS on output power for very close UEs R4 -
R4‑030340 LS on Cell re-selection test tolerances R4 -
R4‑030341 - - -
R4‑030342 Maximum output power for different BS class - -
R4‑030343 Maximum output power for different BS class - -
R4‑030344 TGPL limitations for inter-frequency measurements - -
R4‑030345 TGPL limitations for inter-frequency measurements - -
R4‑030346 TGPL limitations for inter-frequency measurements - -
R4‑030347 TGPL limitations for inter-frequency measurements - -
R4‑030348 LS on Antenna Interface Standards Group (AISG) R4 -
R4‑030349 Maximum output power for different BS class - -
R4‑030350 Maximum output power for different BS class - -
R4‑030351 LS on Rate Adaptation of AMR Codec R4 -
R4‑030352 LS on clarification on minimum set of TFCs for TFC selection R4 -
R4‑030353 TGPL limitations for inter-frequency measurements - -
R4‑030354 TGPL limitations for inter-frequency measurements - -
R4‑030355 TGPL limitations for inter-frequency measurements - -
R4‑030356 TGPL limitations for inter-frequency measurements - -
R4‑030357 - - -
R4‑030358 Maximum output power for different BS class - -
R4‑030359 - - -
R4‑030360 - - -
R4‑030361 - - -
R4‑030362 - - -
R4‑030363 - - -

page generated from database: 2019-08-12 14:39:02