The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R3-51 - 2006-02-13 to 2006-02-17, Denver

meeting id: R3-51 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R3‑060087 - - -
R3‑060088 - - -
R3‑060089 - - -
R3‑060090 - - -
R3‑060091 - - -
R3‑060092 - - -
R3‑060093 - - -
R3‑060094 - - -
R3‑060095 Enabling the Providing of Velocity - -
R3‑060096 Enabling the Providing of Velocity - -
R3‑060097 Enabling the Providing of Velocity - -
R3‑060098 Enabling the Providing of Velocity - -
R3‑060099 E-DCH HARQ Combining Capability - -
R3‑060100 E-DCH HARQ Combining Capability - -
R3‑060101 - - -
R3‑060102 - - -
R3‑060104 - - -
R3‑060105 - - -
R3‑060108 Correction of IE name in procedure text for MBMS Session Update - -
R3‑060109 Correction of IE name in procedure text for MBMS Session Update - -
R3‑060110 Adding the SRB-ID and HS-DSCH/E-DCH MAC-d flow ID mapping info - -
R3‑060111 Adding the SRB-ID and HS-DSCH/E-DCH MAC-d flow ID mapping info - -
R3‑060112 - - -
R3‑060113 F-DPCH Cell Capability Enhancement - -
R3‑060114 HARQ Info Configuration For E-DCH - -
R3‑060115 HARQ Info Configuration For E-DCH - -
R3‑060116 - - -
R3‑060117 - - -
R3‑060118 - - -
R3‑060119 - - -
R3‑060120 Completion of SAS-centric mode - -
R3‑060121 - - -
R3‑060122 Introduction of the PLCCH - -
R3‑060123 Introduction of the PLCCH - -
R3‑060124 Introduction of the PLCCH - -
R3‑060125 Introduction of 7.68Mcps TDD option - -
R3‑060126 Introduction of 7.68Mcps TDD option - -
R3‑060127 Introduction of 7.68Mcps TDD option - -
R3‑060128 Introduction of 7.68Mcps TDD option - -
R3‑060129 Introduction of 7.68Mcps TDD option - -
R3‑060130 Introduction of 7.68Mcps TDD option - -
R3‑060131 Introduction of 7.68Mcps TDD option - -
R3‑060132 Introduction of 7.68Mcps TDD option - -
R3‑060133 - - -
R3‑060134 - - -
R3‑060135 Correction of Notification Indicator - -
R3‑060136 - - -
R3‑060137 - - -
R3‑060138 - - -
R3‑060139 - - -
R3‑060140 - - -
R3‑060141 - - -
R3‑060142 - - -
R3‑060143 - - -
R3‑060144 Correction of signaling bearer mode for MBMS Registration Failure - -
R3‑060145 Correction of signaling bearer mode for MBMS Registration Failure - -
R3‑060146 Correction on Radio Link Parameter Update Indication - -
R3‑060147 - - -
R3‑060148 - - -
R3‑060149 - - -
R3‑060150 - - -
R3‑060151 - - -
R3‑060152 - - -
R3‑060153 - - -
R3‑060154 Clarification on SCCH and SICH TPC step size for LCR TDD - -
R3‑060155 Adding HS-DSCH TDD Info in Radio Link Addition procedure - -
R3‑060156 - - -
R3‑060157 Combined Active Set Update and E-DCH Serving Cell Change with Radio Link Addition Request (Inter RNC Case) - -
R3‑060158 Combined Active Set Update and E-DCH Serving Cell Change with Radio Link Addition Request (Inter Node B Case) - -
R3‑060159 - - -
R3‑060160 - - -
R3‑060162 New RANAP Failure Cause Value for Relocation - -
R3‑060163 New RANAP Failure Cause Value for Relocation - -
R3‑060165 Baseline Release Capability Information for Relocation form Neighbouring RNC over Iur - -
R3‑060166 NBAP Review before Freezing - -
R3‑060167 E-DCH Mac-D PDU Size List Alignment - -
R3‑060168 E-DCH Mac-D PDU Size List Alignment - -
R3‑060169 - - -
R3‑060170 Non serving HSDPA indicator for E-DCH - -
R3‑060171 Non serving HSDPA indicator for E-DCH - -
R3‑060172 - - -
R3‑060173 - - -
R3‑060174 SI/PSI Information Transfer during inter-RAT PS Handover - -
R3‑060176 - - -
R3‑060177 - - -
R3‑060178 - - -
R3‑060179 Relocation involving some preserved NRT RABs v1 - -
R3‑060181 Relocation involving some preserved NRT RABs v21 - -
R3‑060183 Relocation involving some preserved NRT RABs v22 - -
R3‑060185 - - -
R3‑060186 - - -
R3‑060187 - - -
R3‑060188 - - -
R3‑060189 - - -
R3‑060190 - - -
R3‑060191 - - -
R3‑060192 - - -
R3‑060193 SRNS Relocation example correction - -
R3‑060194 SRNS Relocation example correction - -
R3‑060195 SRNS Relocation example correction - -
R3‑060196 - - -
R3‑060197 - - -
R3‑060199 Compressed Mode Reconfiguration - -
R3‑060200 Clarification on serving EDCH cell change - -
R3‑060201 Clarification on serving EDCH cell change - -
R3‑060202 Correction on the decoding of EDCH - -
R3‑060206 - - -
R3‑060207 - - -
R3‑060208 - - -
R3‑060209 - - -
R3‑060210 - - -
R3‑060211 - - -
R3‑060212 Maximum Cell Size Limitations - -
R3‑060213 Maximum Cell Size Limitations - -
R3‑060214 Maximum Cell Size Limitations - -
R3‑060215 Maximum Cell Size Limitations - -
R3‑060216 PS/CS coordination in shared RAN for MOCN - -
R3‑060217 PS/CS coordination in shared RAN for MOCN - -
R3‑060218 Inclusion of redirect attempt flag in Initial UE Message - -
R3‑060219 Inclusion of redirect attempt flag in Initial UE Message - -
R3‑060220 - - -
R3‑060221 Error Correction Radio Link Parameter Update - -
R3‑060222 Error Correction ASN.1 Radio Link Parameter Update - -
R3‑060223 - - -
R3‑060224 CR cross-dependencies for HS cell change by RL ADDITION - -
R3‑060225 CR cross-dependencies for HS cell change by RL ADDITION - -
R3‑060226 E-DCH Maximum Rate Indication - -
R3‑060227 E-DCH Maximum Rate Indication - -
R3‑060228 Alignment of E-DCH RL Set ID - -
R3‑060229 Alignment of E-DCH RL Set ID - -
R3‑060230 Compressed Mode Correction - -
R3‑060231 Compressed Mode Correction - -
R3‑060232 - - -
R3‑060233 EDCH rate limitation issue when processing overload - -
R3‑060234 EDCH rate limitation issue when processing overload - -
R3‑060235 Addition of the SIR Target for HS-SICH in 1.28Mcps TDD - -
R3‑060236 Addition of the SIR Target for HS-SICH in 1.28Mcps TDD - -
R3‑060237 Correction to the on demand mesurement for the HS-SICH in the dedicated measurement procedure for TDD - -
R3‑060238 Correction to the on demand mesurement for the HS-SICH in the dedicated measurement procedure for TDD - -
R3‑060239 - - -
R3‑060240 - - -
R3‑060241 SRB mapping toward HS-DSCH and E-DCH MAC-d flows - -
R3‑060242 SRB mapping toward HS-DSCH and E-DCH MAC-d flows - -
R3‑060243 Iu Release when detecting double Iu - -
R3‑060244 Iu Release when detecting double Iu - -
R3‑060245 - - -
R3‑060246 Correction of criticality for Unirectional DCH Indictor - -
R3‑060247 Correction of criticality for Unirectional DCH Indictor - -
R3‑060248 - - -
R3‑060249 - - -
R3‑060250 - - -
R3‑060251 HARQ Failure Indication due to MAC-e Reset in UE - -
R3‑060252 HARQ Failure Indication due to MAC-e Reset in UE - -
R3‑060253 HARQ Failure Indication due to MAC-e Reset in UE - -
R3‑060254 Correction on Criticality of Unidirectional DCH Indicator in FDD DCHs to Modify - -
R3‑060255 Correction on Criticality of Unidirectional DCH Indicator in FDD DCHs to Modify - -
R3‑060257 General Corrections and Improvements for E-DCH - -
R3‑060259 Correction on HSPA Serving Cell Change using RL Addition procedure - -
R3‑060260 De-allocation of the previous resources when unsynchronized HSPA Serving Cell Change is done by RL Addition procedure - -
R3‑060261 De-allocation of the previous resources when unsynchronized HSPA Serving Cell Change is done by RL Addition procedure - -
R3‑060262 - - -
R3‑060263 - - -
R3‑060264 - - -
R3‑060265 - - -
R3‑060266 - - -
R3‑060267 - - -
R3‑060268 Non-serving E-DCH Load Excess Indication - -
R3‑060269 - - -
R3‑060270 - - -
R3‑060271 - - -
R3‑060272 - - -
R3‑060274 - - -
R3‑060275 - - -
R3‑060276 - - -
R3‑060277 - - -
R3‑060278 - - -
R3‑060279 - - -
R3‑060280 Introduction of E-DCH Reference Power Offset - -
R3‑060281 Introduction of E-DCH Reference Power Offset - -
R3‑060282 Clarification for HARQ Failure Indication - -
R3‑060283 - - -
R3‑060284 - - -
R3‑060285 - - -
R3‑060286 - - -
R3‑060287 - - -
R3‑060288 - - -
R3‑060289 - - -
R3‑060290 - - -
R3‑060291 - - -
R3‑060292 Cause of MBMS RAB Establishment Indication - -
R3‑060293 Cause of MBMS RAB Establishment Indication - -
R3‑060294 - - -
R3‑060295 - - -
R3‑060299 Clarification on SCCH TPC step size for LCR TDD - -
R3‑060300 Adding HS-DSCH TDD Info in Radio Link Addition procedure - -
R3‑060301 E-DCH Mac-D PDU Size List Alignment - -
R3‑060302 E-DCH Mac-D PDU Size List Alignment - -
R3‑060303 Non serving HSDPA indicator for E-DCH - -
R3‑060304 Non serving HSDPA indicator for E-DCH - -
R3‑060305 Correction to the on demand mesurement for the HS-SICH in the dedicated measurement procedure for TDD - -
R3‑060306 Correction to the on demand mesurement for the HS-SICH in the dedicated measurement procedure for TDD - -
R3‑060307 Correction on HSPA Serving Cell Change using RL Addition procedure - -
R3‑060311 Introduction of E-DCH Reference Power Offset - -
R3‑060312 Introduction of E-DCH Reference Power Offset - -
R3‑060313 CR cross-dependencies for HS cell change by RL ADDITION - -
R3‑060314 F-DPCH Cell Capability Enhancement - -
R3‑060315 Non-serving E-DCH Load Excess Indication - -
R3‑060316 Clarification for HARQ Failure Indication - -
R3‑060317 E-DCH HARQ Combining Capability - -
R3‑060318 - - -
R3‑060319 PS/CS coordination in shared RAN for MOCN - -
R3‑060320 PS/CS coordination in shared RAN for MOCN - -
R3‑060321 Inclusion of redirect attempt flag in Initial UE Message - -
R3‑060322 Inclusion of redirect attempt flag in Initial UE Message - -
R3‑060323 Addition of the SIR Target for HS-SICH in 1.28Mcps TDD - -
R3‑060324 Addition of the SIR Target for HS-SICH in 1.28Mcps TDD - -
R3‑060327 Correction of signaling bearer mode for MBMS Registration Failure - -
R3‑060328 Correction of signaling bearer mode for MBMS Registration Failure - -
R3‑060329 - - -
R3‑060332 - - -
R3‑060333 - - -
R3‑060334 PS/CS coordination in shared RAN for MOCN - -
R3‑060335 PS/CS coordination in shared RAN for MOCN - -
R3‑060336 Inclusion of redirect attempt flag in Initial UE Message - -
R3‑060337 Inclusion of redirect attempt flag in Initial UE Message - -
R3‑060338 Iu Release when detecting double Iu - -
R3‑060339 Iu Release when detecting double Iu - -
R3‑060340 - - -
R3‑060341 Introduction of the PLCCH - -
R3‑060342 Introduction of the PLCCH - -
R3‑060343 Completion of SAS-centric mode - -
R3‑060344 Enabling the Providing of Velocity - -
R3‑060345 Enabling the Providing of Velocity - -
R3‑060346 Introduction of 7.68Mcps TDD option - -
R3‑060347 Introduction of 7.68Mcps TDD option - -
R3‑060348 Introduction of 7.68Mcps TDD option - -
R3‑060349 Introduction of 7.68Mcps TDD option - -
R3‑060351 - - -
R3‑060352 - - -
R3‑060353 Introduction of 7.68Mcps TDD option - -
R3‑060354 Introduction of 7.68Mcps TDD option - -
R3‑060355 Iu Release when detecting double Iu - -
R3‑060356 - - -
R3‑060357 - - -
R3‑060358 - - -
R3‑060359 - - -
R3‑060360 Correction of the presence of the cell capacity class value IE - -
R3‑060361 Correction of the presence of the cell capacity class value IE - -
R3‑060363 - - -
R3‑060364 - - -
R3‑060365 - - -
R3‑060366 LS on input to TS25.202 R3 -
R3‑060367 LS on SI/PSI Information Transfer to the UE for inter-RAT PS Handover R3 -
R3‑060368 - - -
R3‑060369 - - -
R3‑060370 Enabling the Providing of Velocity - -
R3‑060371 - - -
R3‑060372 DCH coordination for IMR within SRB#5 - -
R3‑060373 Enabling the Providing of Velocity - -
R3‑060374 - - -
R3‑060375 - - -
R3‑060376 Adding HS-DSCH TDD Info in Radio Link Addition procedure - -
R3‑060377 Adding HS-DSCH TDD Info in Radio Link Addition procedure - -
R3‑060378 Response LS on inter-RAT DTM Handover R3 -
R3‑060379 - - -
R3‑060380 Correction of signaling bearer mode for MBMS Registration Failure - -
R3‑060381 Correction of signaling bearer mode for MBMS Registration Failure - -
R3‑060382 LS on "alignment of cause mapping" R3 -
R3‑060383 Iu Release when detecting double Iu - -
R3‑060384 - - -
R3‑060385 Combined Active Set Update and E-DCH Serving Cell Change with Radio Link Addition Request (Inter RNC Case) - -
R3‑060386 Combined Active Set Update and E-DCH Serving Cell Change with Radio Link Addition Request (Inter Node B Case) - -
R3‑060387 Non serving HSDPA indicator for E-DCH - -
R3‑060388 Non serving HSDPA indicator for E-DCH - -
R3‑060389 Introduction of E-DCH Reference Power Offset - -
R3‑060390 Introduction of E-DCH Reference Power Offset - -
R3‑060391 Adding HS-DSCH TDD Info in Radio Link Addition procedure - -
R3‑060392 Adding HS-DSCH TDD Info in Radio Link Addition procedure - -
R3‑060393 HARQ Failure Indication due to MAC-e Reset in UE - -
R3‑060394 HARQ Failure Indication due to MAC-e Reset in UE - -
R3‑060395 HARQ Failure Indication due to MAC-e Reset in UE - -
R3‑060396 Clarification for HARQ Failure Indication - -
R3‑060397 Enabling the Providing of Velocity - -
R3‑060398 Enabling the Providing of Velocity - -
R3‑060399 - - -
R3‑060400 - - -
R3‑060401 - - -
R3‑060402 - - -
R3‑060403 - - -
R3‑060404 LS on "Relocation of preserved RABs" R3 -

page generated from database: 2019-10-18 15:20:11