The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R3-48 - 2005-08-29 to 2005-09-02, London

meeting id: R3-48 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R3‑050827 - - -
R3‑050828 - - -
R3‑050829 - - -
R3‑050830 - - -
R3‑050831 - - -
R3‑050832 - - -
R3‑050833 - - -
R3‑050834 - - -
R3‑050835 - - -
R3‑050836 - - -
R3‑050837 - - -
R3‑050838 - - -
R3‑050839 - - -
R3‑050840 - - -
R3‑050841 - - -
R3‑050842 - - -
R3‑050843 - - -
R3‑050844 - - -
R3‑050846 - - -
R3‑050847 - - -
R3‑050848 Addition of the U-TDOA positioning method to the UTRAN - -
R3‑050849 Addition of the SAS centric SCCP operating mode - -
R3‑050850 Addition of the U-TDOA positioning method to the UTRAN - -
R3‑050851 Enabling the Providing of Velocity - -
R3‑050852 Enabling the Providing of Velocity - -
R3‑050853 Enabling the Providing of Velocity - -
R3‑050854 Enabling the Providing of Velocity - -
R3‑050855 - - -
R3‑050856 NBAP stage 3 alignment with current status - -
R3‑050857 RNSAP stage 3 alignment with current status - -
R3‑050858 - - -
R3‑050859 - - -
R3‑050860 - - -
R3‑050861 IP Transport Option for Common TrCH Data Streams - -
R3‑050862 IP Transport Option for Common TrCH Data Streams - -
R3‑050863 E-DCH Minimum Set Reference Correction - -
R3‑050864 - - -
R3‑050865 Missing definitions for Vendor Specific EP - -
R3‑050866 Missing definitions for Vendor Specific EP - -
R3‑050867 - - -
R3‑050868 ASN.1 coding updates - -
R3‑050869 ASN.1 coding updates - -
R3‑050870 MBMS applies for the PS domain - -
R3‑050871 MBMS applies for the PS domain - -
R3‑050872 Provision of MS specific UTRAN capabilities for PS HO from GERAN to UTRAN - -
R3‑050873 - - -
R3‑050874 - - -
R3‑050875 Correction related to of E-DCH IEs - -
R3‑050876 - - -
R3‑050877 - - -
R3‑050878 CRC-11 Polynomial for E-DCH - -
R3‑050879 Improvement of the Abnormal Conditions description of the COMMON MEASUREMENT INITIATION procedure - -
R3‑050880 - - -
R3‑050881 - - -
R3‑050882 Priority Service Indication in Paging message - -
R3‑050883 Compressed Mode Reconfiguration - -
R3‑050884 Addition of Positioning Methods - -
R3‑050885 Length inconsistency of IEs in CN Invoke Trace procedure - -
R3‑050886 Length inconsistency of IEs in CN Invoke Trace procedure - -
R3‑050887 CRC Polynomial for EDCH Header - -
R3‑050888 - - -
R3‑050889 Correction of Reference - -
R3‑050890 Introduction of Packet Handover - -
R3‑050891 - - -
R3‑050892 Congestion Severity - -
R3‑050893 - - -
r3‑050894 - - -
R3‑050895 - - -
R3‑050896 Load Balancing with NNSF - -
R3‑050897 - - -
R3‑050898 RAB Linking - -
R3‑050899 - - -
R3‑050900 - - -
R3‑050901 - - -
R3‑050902 - - -
R3‑050903 EDCH capability in neighboring cells - -
R3‑050904 - - -
R3‑050905 Adding frequency band indicator - -
R3‑050906 - - -
R3‑050907 Correction of ambiguity introduced by "feature cleanup" - -
R3‑050908 Correction of ambiguity introduced by "feature cleanup" - -
R3‑050909 Signalling of Reference Received Total Wideband Power IE - -
R3‑050910 Received E-DCH Power Estimation Reporting - -
R3‑050911 - - -
R3‑050912 - - -
R3‑050913 Transport Bearer Rearrangement for HSUPA - -
R3‑050914 Support Indicator for E-DCH - -
R3‑050915 General correction and improvement - -
R3‑050916 General correction and improvement - -
R3‑050917 E-DCH Protocol Model - -
R3‑050918 Editorial Corrections - -
R3‑050919 Maximum Transmission Power and Total HSDPA Power for Cell Portion - -
R3‑050920 Correction for Beamforming - -
R3‑050921 - - -
R3‑050922 Feature Cleanup: Removal of DRAC - -
R3‑050923 Feature Cleanup: Removal of DRAC - -
R3‑050924 Inclusion of Inter-RAT PS Handover between UTRAN and GERAN A/Gb - -
R3‑050925 Non HS transmitted power - -
R3‑050926 E-DCH Information elements editorial cleanup - -
R3‑050927 E-DCH Information elements editorial cleanup - -
R3‑050928 E-DCH Logical Channel ID - -
R3‑050929 E-DCH Logical Channel ID - -
R3‑050930 E-DCH RL handling clarifications - -
R3‑050931 E-DCH RL handling clarifications - -
R3‑050932 E-DCH miscellaneous corrections - -
R3‑050933 E-DCH miscellaneous corrections - -
R3‑050934 Maximum UE TX Power for E-DCH - -
R3‑050935 Maximum UE TX Power for E-DCH - -
R3‑050936 - - -
R3‑050937 Header CRC polynomial definition missing for E-DCH - -
R3‑050938 Value range missing for Number of Subframes and Number of Mac-es PDUs fields - -
R3‑050939 - - -
R3‑050940 PS/CS registration coordination in shared RAN for MOCN - -
R3‑050941 - - -
R3‑050942 - - -
R3‑050943 - - -
R3‑050944 - - -
R3‑050945 - - -
R3‑050946 - - -
R3‑050947 - - -
R3‑050948 Transport Network Congestion Control Indication - -
R3‑050949 Power-Up period clarifications - -
R3‑050950 Power-Up period clarifications - -
R3‑050951 Removal of Option 4 (use of UI frames) - -
R3‑050952 - - -
R3‑050953 Addition of MBMS Notification function description - -
R3‑050954 Clarification of the Relocation Cancel and Relocation Preparation - -
R3‑050955 - - -
R3‑050956 Proposed CR to 25.433 [Rel-6] on Correction for the measurement report for PUSCH for TDD - -
R3‑050957 Proposed CR to 25.433 [Rel-6] on Correction for DPCH Modification in asynthronised RL reconfiguration procedure for LCR TDD - -
R3‑050958 - - -
R3‑050959 - - -
R3‑050961 Serving to Non-serving power ratio - -
R3‑050962 Enabling the Providing of Velocity - -
R3‑050963 Enabling the Providing of Velocity - -
R3‑050964 - - -
R3‑050965 - - -
R3‑050966 - - -
R3‑050967 - - -
R3‑050969 Correction of ambiguity introduced by "feature cleanup" - -
R3‑050970 Correction of ambiguity introduced by "feature cleanup" - -
r3‑050971 - - -
R3‑050972 Proposed CR to 25.433 [Rel-6] on Correction for DPCH Modification in asynthronised RL reconfiguration procedure for LCR TDD - -
R3‑050973 - - -
R3‑050974 - - -
R3‑050975 - - -
R3‑050976 - - -
R3‑050977 CRC-11 Polynomial for E-DCH - -
R3‑050978 Value range missing for Number of Subframes and Number of Mac-es PDUs fields - -
R3‑050979 Congestion Indication for HSDPA - -
R3‑050980 Non HS transmitted power - -
R3‑050981 - - -
R3‑050982 Serving to Non-serving power ratio - -
R3‑050983 - - -
R3‑050985 - - -
R3‑050986 Optional presence of new IE Flags IE and new IEs in spare extension - -
R3‑050987 Optional presence of new IE Flags IE and new IEs in spare extension - -
R3‑050988 Power-Up period clarifications - -
R3‑050989 Power-Up period clarifications - -
R3‑050990 Removal of Option 4 (use of UI frames) - -
R3‑050991 Maximum UE Tx Power for EDCH - -
R3‑050992 EDCH cleanup - -
R3‑050993 EDCH cleanup - -
R3‑050994 Reconfiguration of E-RGCH/HICH at serving cell change - -
R3‑050995 Reconfiguration of E-RGCH/HICH at serving cell change - -
R3‑050996 Feature Cleanup: Removal of DRAC - -
R3‑050997 Feature Cleanup: Removal of DRAC - -
R3‑050998 Addition of the U-TDOA positioning method to the UTRAN - -
R3‑050999 - - -
R3‑051000 PS/CS registration coordination in shared RAN for MOCN - -
R3‑051001 Addition of the SAS centric SCCP operating mode - -
R3‑051002 - - -
R3‑051003 - - -
R3‑051004 Enabling the Providing of Velocity - -
r3‑051005 - - -
R3‑051006 Enabling the Providing of Velocity - -
R3‑051007 - - -
R3‑051008 - - -
R3‑051009 Non-serving E-DCH to serving E-DCH power ratio R3 -
R3‑051011 Removal of Option 4 (use of UI frames) - -
R3‑051012 LS on Method for provisioning of the UE RAC and START_PS to the network R3 -
R3‑051013 Priority Service Indication in Paging message - -
R3‑051014 Indication of Number of Idle Mode UEs in RANAP R3 -
R3‑051015 Clarification of the Relocation Cancel and Relocation Preparation - -
R3‑051016 Maximum Transmission Power and Total HS Power for Cell Portion - -
R3‑051017 Adding frequency band indicator - -
R3‑051018 Improvement of the Abnormal Conditions description of the COMMON MEASUREMENT INITIATION procedure - -
R3‑051019 Proposed CR to 25.433 [Rel-6] on Correction for the measurement report for PUSCH for TDD - -
R3‑051020 Proposed CR to 25.433 [Rel-6] on Correction for DPCH Modification in asynthronised RL reconfiguration procedure for LCR TDD - -
R3‑051021 Congestion Indication for HSDPA - -
R3‑051022 - - -
R3‑051023 Optional presence of new IE Flags IE and new IEs in spare extension - -
R3‑051024 Optional presence of new IE Flags IE and new IEs in spare extension - -
R3‑051025 Non HS transmitted power - -
R3‑051026 Serving to Non-serving power ratio - -
R3‑051027 Maximum UE Tx Power for EDCH - -
R3‑051028 NBAP stage 3 alignment with current status - -
R3‑051029 RNSAP stage 3 alignment with current status - -
R3‑051030 Insertion loss for RET - -
R3‑051031 Insertion loss for RET - -
R3‑051032 Testing for RET - -
R3‑051033 Testing for RET - -
R3‑051034 Time delay for RET - -
R3‑051035 Time delay for RET - -
R3‑051036 Intermodulation attenuation for RET - -
R3‑051037 Intermodulation attenuation for RET - -
R3‑051038 BS and RET modem isolation - -
R3‑051039 BS and RET modem isolation - -
R3‑051041 - - -
R3‑051042 - - -
R3‑051043 - - -
R3‑051044 Signalling of Reference Received Total Wideband Power IE - -
R3‑051045 Including HS-DSCH serving cell change in RL Addition - -
R3‑051046 - - -
R3‑051047 Compressed Mode Reconfiguration - -
R3‑051048 NBAP stage 3 alignment with current status - -
R3‑051049 RNSAP stage 3 alignment with current status - -
R3‑051050 - - -
R3‑051051 Maximum UE Tx Power for EDCH - -
R3‑051052 Maximum Transmission Power and Total HS Power for Cell Portion - -
R3‑051053 Adding frequency band indicator - -
R3‑051054 Enabling the Providing of Velocity - -
R3‑051055 Enabling the Providing of Velocity - -
R3‑051056 Compressed Mode Reconfiguration - -
R3‑051057 Maximum UE TX Power for E-DCH - -
R3‑051058 Maximum UE TX Power for E-DCH - -
R3‑051059 Maximum UE Tx Power for EDCH - -

page generated from database: 2019-11-04 12:31:40