The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R3-45 - 2004-11-15 to 2004-11-19, Yokohama

meeting id: R3-45 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R3‑041412 - - -
R3‑041413 Removal of ASN ambiguity in TDD multiple RLs - -
R3‑041414 Removal of ASN ambiguity in TDD multiple RLs - -
R3‑041415 Alignment of TFCI2/Signaling Bearer Re-arrangement IEs criticality and procedure text - -
R3‑041416 Alignment of TFCI2/Signaling Bearer Re-arrangement IEs criticality and procedure text - -
R3‑041417 IP transport option correction - -
R3‑041418 IP transport option correction - -
R3‑041419 Indication of selected PLMN in shared networks - -
R3‑041420 Rerouting in MOCN - -
R3‑041421 DC power supply distribution - -
R3‑041422 Reduction of risk of accidentional erasure of Ret application SW - -
R3‑041423 Clarification of allowed tilt operation during self test - -
R3‑041424 State Model for RET device - -
R3‑041425 clarification correction to IB_SG_Data IE semantics description - -
R3‑041426 clarification correction to IB_SG_Data IE semantics description - -
R3‑041427 clarification of data content in IB_SG_data_IE - -
R3‑041428 clarification of data content in IB_SG_data_IE - -
R3‑041430 - - -
R3‑041432 - - -
R3‑041433 - - -
R3‑041434 - - -
R3‑041435 - - -
R3‑041436 - - -
R3‑041437 - - -
R3‑041438 - - -
R3‑041439 - - -
R3‑041440 - - -
R3‑041441 - - -
R3‑041442 - - -
R3‑041443 - - -
R3‑041444 Clarification to Security Mode Control - -
R3‑041445 Clarification to Security Mode Control - -
R3‑041446 - - -
R3‑041447 Introduction of E-DCH in TS 25.430 - -
R3‑041448 - - -
R3‑041449 Minor Corrections and editorial changes to 25.460 according to RAN3#44 - -
R3‑041450 Minor Corrections and editorial changes to 25.462 according to RAN3#44 - -
R3‑041451 Corrections and editorial changes to 25.463 according to RAN3#44 - -
R3‑041452 - - -
R3‑041453 Introduction of MBMS - -
R3‑041454 Introduction of MBMS scenarios - -
R3‑041455 - - -
R3‑041456 Introduction of E-DCH - -
R3‑041458 - - -
R3‑041459 - - -
R3‑041461 - - -
R3‑041462 CR - 25.410-v6.1.0 SABP Encapsulation within TCP packets - -
R3‑041463 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041464 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041465 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041466 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041467 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041468 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041469 - - -
R3‑041470 - - -
R3‑041471 - - -
R3‑041472 - - -
R3‑041473 MBMS changes for RNSAP - -
R3‑041474 Introduction of MBMS in UTRAN - -
R3‑041475 - - -
R3‑041476 - - -
R3‑041477 - - -
R3‑041478 MOCN rerouting function - -
R3‑041479 Support of MOCN and GWCN configurations in UTRAN - -
R3‑041480 Indication of the selected PLMN in connected mode - -
R3‑041481 - - -
R3‑041482 Introduction of MBMS - -
R3‑041483 Introduction to Fractional DPCH - -
R3‑041484 Introduction to Fractional DPCH - -
R3‑041485 Introduction to Fractional DPCH - -
R3‑041486 Introduction to Fractional DPCH - -
R3‑041487 Introduction to Fractional DPCH - -
R3‑041488 Introduction to Fractional DPCH - -
R3‑041489 Introduction to Fractional DPCH - -
R3‑041491 - - -
R3‑041492 - - -
R3‑041493 Correction of reference to "MAC-hs Guaranteed Bit Rate" - -
R3‑041494 Correction of reference to "MAC-hs Guaranteed Bit Rate" - -
R3‑041495 Correction of duplicated and misplaced procedure text for RL Addition - -
R3‑041496 Correction of duplicated and misplaced procedure text for RL Addition - -
R3‑041497 Correction to not mention Flexible Hard Split Support Indicator IE in procedure text - -
R3‑041498 Correction to not mention Flexible Hard Split Support Indicator IE in procedure text - -
R3‑041499 - - -
R3‑041500 - - -
R3‑041501 - - -
R3‑041502 - - -
R3‑041503 - - -
R3‑041504 - - -
R3‑041505 - - -
R3‑041506 Introduction of an HS-DSCH Data Frame "Delay RNC reference Time" (DRT) extension - -
R3‑041507 Introduction of an HS-DSCH Data Frame "Delay RNC reference Time" (DRT) extension - -
R3‑041508 Improved demodulator characteristics specification - -
R3‑041509 Requirements missing for when the RS485 bus shall not be driven by the secondary device - -
R3‑041510 Antenna Send Configuration Data procedure missing - -
R3‑041511 Tilt and calibration progress indication - -
R3‑041512 Reduction of risk of accidentional erasure of Ret application SW - -
R3‑041513 MBMS stage 3 support over Iu - -
R3‑041515 Full RANAP support of network initiated SCUDIF - -
R3‑041516 Correction of the procedure text for the Signalling Indication IE in RAB Assignment procedure - -
R3‑041517 Introduction of Software Download State model - -
R3‑041518 Update of Software Download description - -
R3‑041519 Alarm handling clarification - -
R3‑041520 RET DC power consumption modes - -
R3‑041521 RET DC power consumption clarification - -
R3‑041522 Response message format clarification - -
R3‑041523 Procedure Blocking Behaviour in the RETAP application layer - -
R3‑041524 Return code clean-up and clarification - -
R3‑041525 New reset functionality in the RETAP protocol - -
R3‑041526 New reset functionality in the RETAP protocol - -
R3‑041528 Clarification on the intention of the elementary procedures ReadUserData and WriteUserData - -
R3‑041529 Maximum data payload size in the Transport Layer. - -
R3‑041530 Maximum data payload size in elementary procedures. - -
R3‑041531 Definition of response time in the appication layer. - -
R3‑041532 Redefinition of the Elementary Procedures GetDeviceData and SetDeviceData - -
R3‑041533 Full RANAP support of network initiated SCUDIF - -
R3‑041534 Minor Corrections and editorial changes to 25.461 - -
R3‑041535 - - -
R3‑041537 - - -
R3‑041540 - - -
R3‑041541 - - -
R3‑041542 Changes for Introducing EDCH - -
R3‑041547 - - -
R3‑041548 Unsuccessful Directed retry in UMTS - -
R3‑041549 Unsuccessful Directed retry in UMTS - -
r3‑041550 - - -
R3‑041551 - - -
R3‑041552 Correction of handling of DT messages during relocation preparation - -
R3‑041553 - - -
R3‑041554 Basic Support of Network-initiated Scudif in release 6 - -
R3‑041555 - - -
R3‑041556 Full Support of Network-initiated Scudif in release 6 - -
R3‑041557 - - -
R3‑041558 Support of full mobility within Network Sharing - -
r3‑041559 - - -
R3‑041560 Introduction of MBMS in TS25410 - -
R3‑041561 - - -
R3‑041562 - - -
R3‑041563 - - -
R3‑041564 - - -
R3‑041565 HS-DPCCH ACK/NACK preamble and postamble - -
R3‑041566 HS-DPCCH ACK/NACK preamble and postamble - -
R3‑041567 - - -
R3‑041568 - - -
R3‑041569 - - -
R3‑041570 - - -
R3‑041571 - - -
R3‑041572 - - -
R3‑041573 HS-DSCH FP Enhancement for Iub/Iur Flow Control Optimisation - -
R3‑041574 HS-DSCH FP Enhancement for Iub/Iur Flow Control Optimisation - -
R3‑041575 - - -
R3‑041578 Clarification of Release of HS-DSCH Resources Using Radio Link Deletion Procedure - -
R3‑041579 Clarification of Release of HS-DSCH Resources Using Radio Link Deletion Procedure - -
R3‑041580 MBMS related changes - -
R3‑041581 Add a length indicator for TCP/IP packet which contains SABP message PERs - -
R3‑041582 Add a length indicator for TCP/IP packet which contains SABP message PERs - -
R3‑041583 - - -
R3‑041584 - - -
R3‑041585 Maximum data payload size in the Transport Layer. - -
R3‑041586 - - -
R3‑041587 Support of full Mobility/Backwards Compatibility in Network Sharing - -
r3‑041588 - - -
R3‑041589 Alternative 1 of DT messages and multiple relocations - -
R3‑041590 Alternative 1 of DT messages and multiple relocations - -
R3‑041591 Alternative 2 of DT messages and multiple relocations - -
R3‑041592 - - -
R3‑041593 - - -
R3‑041594 - - -
R3‑041595 - - -
R3‑041596 Introduction of Frame Sequence Number in the HS-DSCH Data Frame structure - -
R3‑041597 Introduction of Frame Sequence Number in the HS-DSCH Data Frame structure - -
r3‑041598 - - -
R3‑041599 - - -
R3‑041600 - - -
R3‑041601 - - -
R3‑041602 - - -
R3‑041603 - - -
R3‑041604 - - -
R3‑041605 - - -
R3‑041606 IP transport option correction - -
R3‑041607 IP transport option correction - -
R3‑041609 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041610 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041611 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041612 Correction to the Assigned Criticality of UL Synchronisation Parameters LCR IE for 1.28Mcps TDD - -
R3‑041613 Introduction of MBMS scenarios - -
R3‑041614 - - -
R3‑041615 outdated ITU-T reference - -
R3‑041616 outdated ITU-T reference - -
R3‑041617 outdated ITU-T reference - -
R3‑041618 outdated ITU-T reference - -
R3‑041619 outdated ITU-T reference - -
R3‑041620 - - -
R3‑041621 Rerouting in MOCN - -
R3‑041622 - - -
R3‑041623 - - -
r3‑041624 - - -
R3‑041625 Minor Corrections and editorial changes to 25.460 according to RAN3#44 - -
R3‑041626 Reduction of risk of accidentional erasure of Ret application SW - -
R3‑041627 Update of Software Download description - -
R3‑041628 Alarm handling clarification - -
R3‑041629 RET DC power consumption clarification - -
R3‑041630 Response message format clarification - -
R3‑041631 Maximum data payload size in elementary procedures. - -
R3‑041632 Procedure Blocking Behaviour in the RETAP application layer - -
R3‑041633 Return code clean-up and clarification - -
R3‑041634 New reset functionality in the RETAP protocol - -
R3‑041635 Clarification on the intention of the elementary procedures ReadUserData and WriteUserData - -
R3‑041636 Redefinition of the Elementary Procedures GetDeviceData and SetDeviceData - -
R3‑041637 Maximum data payload size in the Transport Layer. - -
R3‑041638 New reset functionality in the RETAP protocol - -
R3‑041639 - - -
R3‑041640 - - -
R3‑041641 Minor Corrections and editorial changes to 25.460 according to RAN3#44 - -
R3‑041642 Antenna Send Configuration Data procedure missing - -
R3‑041643 Introduction of Software Download State model - -
R3‑041644 Update of Software Download description - -
R3‑041645 Alarm handling clarification - -
R3‑041646 - - -
R3‑041647 - - -
R3‑041648 LS on MBMS Information Elements over Iu interface R3 -
R3‑041649 MBMS related changes - -
R3‑041650 Clarification to Security Mode Control - -
R3‑041651 Clarification to Security Mode Control - -
R3‑041652 - - -
R3‑041653 - - -
R3‑041654 MBMS stage 3 support over Iu - -
R3‑041655 LS on the TSG RAN WG 3 Review of TR 32.804 v6.0.0 R3 -
R3‑041656 Clarification to Security Mode Control - -
R3‑041657 Adaptive encoding of IB_SG_DATA - -
R3‑041659 Changes on 25.427 due to the introduction of Enhanced Uplink - -
R3‑041660 Introduction of E-DCH in 25.401 - -
R3‑041661 Introduction of MBMS - -
R3‑041662 Introduction to Fractional DPCH - -
R3‑041663 Introduction to Fractional DPCH - -
R3‑041664 Introduction of E-DCH - -
R3‑041665 Introduction of E-DCH in TS 25.430 - -
R3‑041666 - - -
R3‑041667 Adaptive encoding of IB_SG_DATA - -
R3‑041670 - - -
R3‑041671 Alarm handling clarification - -
R3‑041672 RET DC power consumption modes - -
R3‑041673 RET DC power consumption clarification - -
R3‑041674 Response message format clarification - -
R3‑041675 Maximum data payload size in elementary procedures. - -
R3‑041676 Return code clean-up and clarification - -
R3‑041677 Clarification on the intention of the elementary procedures ReadUserData and WriteUserData - -
R3‑041678 Maximum data payload size in the Transport Layer. - -
R3‑041679 Redefinition of the Elementary Procedures GetDeviceData and SetDeviceData - -
R3‑041680 Improved demodulator characteristics specification - -
R3‑041681 Support of full Mobility/Backwards Compatibility in Network Sharing - -
R3‑041682 - - -
R3‑041683 - - -
R3‑041684 - - -
R3‑041686 Introduction to Fractional DPCH - -
R3‑041687 - - -
R3‑041688 Introduction to Fractional DPCH - -
R3‑041689 Introduction to Fractional DPCH - -
R3‑041690 Introduction to Fractional DPCH - -
R3‑041691 Introduction to Fractional DPCH - -
R3‑041692 CR for Introducing MBMS in 25.401 - -
R3‑041693 MBMS related changes - -
R3‑041694 Introduction of MBMS in TS25410 - -
R3‑041695 Introduction of MBMS - -
R3‑041696 - - -
R3‑041697 Introduction of MBMS - -
r3‑041698 - - -
R3‑041699 Introduction of MBMS - -
R3‑041700 Introduction of MBMS in UTRAN - -
R3‑041701 - - -
R3‑041702 - - -
R3‑041703 Changes for Introducing EDCH - -
R3‑041704 CR for Introduction of E-DCH in NBAP - -
R3‑041705 MBMS changes for RNSAP - -
R3‑041706 - - -
R3‑041707 REPLY LS on 23.060 CR on RIM-NACC clean up R3 -
r3‑041709 - - -
R3‑041710 LS Response on LS on Indication of Selected CN operator in connected mode in Shared Networks R3 -
R3‑041711 Support of full Mobility/Backwards Compatibility in Network Sharing - -
R3‑041712 Adaptive encoding of IB_SG_DATA - -
R3‑041714 Introduction of MBMS - -
R3‑041715 Introduction of E-DCH in TS 25.430 - -
R3‑041716 - - -
R3‑041717 Changes on 25.427 due to the introduction of Enhanced Uplink - -
R3‑041718 Basic Support of Network-initiated Scudif in release 6 - -
R3‑041719 Support of Network-initiated Scudif in release 6 - -
R3‑041720 Adaptive encoding of IB_SG_DATA - -
R3‑041721 Adaptive encoding of IB_SG_DATA - -
R3‑041722 Response LS on the PS Handover Work R3 -
R3‑041723 CR for Introducing MBMS in 25.401 - -
R3‑041724 MBMS related changes - -
R3‑041725 Introduction of MBMS in TS25410 - -
R3‑041726 MBMS stage 3 support over Iu - -
R3‑041727 Introduction of MBMS - -
R3‑041728 MBMS changes for RNSAP - -
R3‑041729 Changes for Introducing EDCH - -
R3‑041730 CR for Introduction of E-DCH in NBAP - -
R3‑041731 Changes on 25.427 due to the introduction of Enhanced Uplink - -
R3‑041732 Introduction of E-DCH - -
R3‑041733 Introduction of E-DCH in 25.401 - -
R3‑041734 Support of Network-initiated Scudif in release 6 - -
R3‑041735 - - -

page generated from database: 2019-08-20 08:43:13