The Mobile
Broadband Standard

3GPP TDocs (written contributions) at meeting

Meeting: R3-16 - 2000-09-11 to 2000-09-16, DALLAS

meeting id: R3-16 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R3‑002449 - - -
R3‑002450 - - -
R3‑002451 - - -
R3‑002452 - - -
R3‑002453 - - -
R3‑002454 - - -
R3‑002455 - - -
R3‑002456 - - -
R3‑002457 - - -
R3‑002458 - - -
R3‑002459 - - -
R3‑002460 - - -
R3‑002461 - - -
R3‑002462 - - -
R3‑002463 - - -
R3‑002464 - - -
R3‑002465 - - -
R3‑002466 - - -
R3‑002467 - - -
R3‑002468 - - -
R3‑002469 - - -
R3‑002470 - - -
R3‑002471 - - -
R3‑002472 - - -
R3‑002473 - - -
R3‑002474 - - -
R3‑002475 - - -
R3‑002476 - - -
R3‑002477 - - -
R3‑002478 - - -
R3‑002479 - - -
R3‑002480 - - -
R3‑002481 - - -
R3‑002482 - - -
R3‑002483 - - -
R3‑002484 - - -
R3‑002485 - - -
R3‑002486 - - -
R3‑002487 - - -
R3‑002488 Clarify the direction of LAI, RAC and SAI IEs in DIRECT TRANSFER message in tabular - -
R3‑002489 - - -
R3‑002490 - - -
R3‑002491 - - -
R3‑002492 - - -
R3‑002493 - - -
R3‑002494 Editorial correction to 25.931 - -
R3‑002497 - - -
R3‑002498 - - -
R3‑002499 - - -
R3‑002500 - - -
R3‑002501 Clarification of Measurement Termination at Measurement Object Deletion - -
R3‑002502 - - -
R3‑002503 - - -
R3‑002504 - - -
R3‑002505 - - -
R3‑002506 - - -
R3‑002507 - - -
R3‑002508 - - -
R3‑002509 - - -
R3‑002510 - - -
R3‑002511 - - -
R3‑002512 - - -
R3‑002513 - - -
R3‑002514 - - -
R3‑002515 - - -
R3‑002516 PRACH related corrections - -
R3‑002517 - - -
R3‑002518 - - -
R3‑002519 Clarification of Measurement termination - -
R3‑002520 Clarification of Measurement termination - -
R3‑002521 CFN on DSCH - -
R3‑002522 Invalid CFN value in control frames - -
R3‑002523 - - -
R3‑002524 - - -
R3‑002525 Protocol specification principles - -
R3‑002526 Protocol specification principles - -
R3‑002527 Protocol specification principles - -
R3‑002528 Protocol specification principles - -
R3‑002529 - - -
R3‑002530 - - -
R3‑002531 - - -
R3‑002532 - - -
R3‑002533 - - -
R3‑002534 - - -
R3‑002535 - - -
R3‑002536 Handling of optional IE’s in RL SETUP and RL ADDITION - -
R3‑002537 - - -
R3‑002538 - - -
R3‑002539 - - -
R3‑002540 PRACH pre-amble threshold definition - -
R3‑002541 - - -
R3‑002542 - - -
R3‑002543 - - -
R3‑002544 - - -
R3‑002545 - - -
R3‑002546 - - -
R3‑002547 - - -
R3‑002548 - - -
R3‑002549 - - -
R3‑002550 - - -
R3‑002551 - - -
R3‑002552 - - -
R3‑002553 - - -
R3‑002554 - - -
R3‑002555 - - -
R3‑002556 Editorial Corrections - -
R3‑002557 - - -
R3‑002558 - - -
R3‑002559 - - -
R3‑002560 - - -
R3‑002561 - - -
R3‑002562 Editorial Modifications for 25.412 - -
R3‑002563 Editorial Modifications for 25.419 - -
R3‑002564 Editorial Modifications for 25.410 - -
R3‑002565 Editorial Modifications for 25.411 - -
R3‑002566 - - -
R3‑002567 - - -
R3‑002568 - - -
R3‑002569 - - -
R3‑002571 - - -
R3‑002572 - - -
R3‑002573 - - -
R3‑002574 - - -
R3‑002575 - - -
R3‑002576 MOVING THE ACCURACY REQUIREMENT TO WG4 SPECIFICATION R3 -
R3‑002577 - - -
R3‑002578 - - -
R3‑002579 - - -
R3‑002580 Common Transport Channel Resources Initialisation Clarification - -
R3‑002581 Inconsistency between Tabular and ASN.1 for TDD messages - -
R3‑002582 Inconsistency between Tabular and ASN.1 for TDD messages - -
R3‑002583 Timing Advance description correction - -
R3‑002584 - - -
R3‑002585 - - -
R3‑002586 - - -
R3‑002587 - - -
R3‑002588 - - -
R3‑002589 - - -
R3‑002590 - - -
R3‑002591 - - -
R3‑002592 - - -
R3‑002593 - - -
R3‑002594 - - -
R3‑002595 - - -
R3‑002596 - - -
R3‑002597 RRC container references - -
R3‑002598 Description of Target Cell ID - -
R3‑002599 - - -
R3‑002600 - - -
R3‑002601 - - -
R3‑002602 - - -
R3‑002603 - - -
R3‑002604 - - -
R3‑002605 - - -
R3‑002606 TI field in Initialisation frame - -
R3‑002607 - - -
R3‑002608 The Number of Octets for the IPTI fields - -
R3‑002609 - - -
R3‑002610 - - -
R3‑002611 - - -
R3‑002612 Sync port accuracy - -
R3‑002613 - - -
R3‑002614 - - -
R3‑002615 - - -
R3‑002616 - - -
R3‑002617 - - -
R3‑002618 - - -
R3‑002619 - - -
R3‑002620 - - -
R3‑002621 - - -
R3‑002622 - - -
R3‑002623 Max PRACH Midamble Shift” presence - -
R3‑002624 - - -
R3‑002625 - - -
R3‑002627 - - -
R3‑002628 Behaviour due to Timing Advance adjustment - -
R3‑002629 Behaviour due to Timing Advance adjustment - -
R3‑002630 - - -
R3‑002631 - - -
R3‑002632 - - -
R3‑002633 - - -
R3‑002634 - - -
R3‑002635 - - -
R3‑002636 - - -
R3‑002637 - - -
R3‑002638 - - -
R3‑002639 - - -
R3‑002640 - - -
R3‑002641 - - -
R3‑002642 - - -
R3‑002645 - - -
R3‑002646 - - -
R3‑002647 - - -
R3‑002648 Editorial correction to 25.426 - -
R3‑002649 Editorial corrections to 25.434 - -
R3‑002650 Correction the semantic description of data volume reporing indication in ASN.1 - -
R3‑002651 - - -
R3‑002652 - - -
R3‑002653 - - -
R3‑002654 - - -
R3‑002655 - - -
R3‑002656 - - -
r3‑002658 - - -
r3‑002659 - - -
R3‑002660 - - -
R3‑002661 - - -
R3‑002662 Editorial Modifications for 25.413 - -
R3‑002663 - - -
R3‑002664 - - -
R3‑002665 - - -
R3‑002666 - - -
R3‑002667 - - -
R3‑002668 - - -
R3‑002672 Editorial corrections for TS25.433 - -
R3‑002673 - - -
R3‑002674 - - -
R3‑002675 - - -
R3‑002678 - - -
R3‑002679 - - -
R3‑002680 - - -
R3‑002681 - - -
R3‑002683 - - -
R3‑002684 Correction of Triggering Message IE - -
R3‑002685 - - -
R3‑002686 - - -
R3‑002687 - - -
R3‑002688 - - -
R3‑002689 - - -
R3‑002690 - - -
r3‑002691 - - -
R3‑002692 - - -
R3‑002693 - - -
R3‑002694 - - -
R3‑002695 - - -
R3‑002696 - - -
R3‑002697 - - -
R3‑002698 - - -
R3‑002699 - - -
R3‑002700 - - -
R3‑002701 - - -
R3‑002702 - - -
R3‑002703 - - -
R3‑002705 - - -
R3‑002706 - - -
R3‑002707 - - -
R3‑002709 - - -
R3‑002710 Handling of the optional IEs inside the Criticality Diagnostics IE - -
R3‑002711 Handling of the optional IEs inside the Criticality Diagnostics IE - -
R3‑002712 Clarification on rules for assigning criticality/presence values in standard releases later than R99 - -
R3‑002713 Clarification on rules for assigning criticality/presence values in standard releases later than R99 - -
R3‑002714 - - -
R3‑002715 - - -
R3‑002716 - - -
R3‑002717 - - -
R3‑002718 Handling of the optional IEs inside the Criticality Diagnostics IE - -
R3‑002719 Handling of the optional IEs inside the Criticality Diagnostics IE - -
R3‑002720 - - -
R3‑002721 - - -
R3‑002722 - - -
R3‑002723 - - -
R3‑002724 - - -
R3‑002725 - - -
R3‑002726 RL TIMING ADJUSTMENT BY UTRAN R3 -
R3‑002727 - - -
R3‑002729 - - -
R3‑002730 - - -
R3‑002731 Handling of invalid patterns in Compressed Mode - -
R3‑002732 - - -
R3‑002733 - - -
R3‑002734 - - -
R3‑002735 - - -
R3‑002736 - - -
R3‑002737 - - -
R3‑002738 - - -
R3‑002739 - - -
R3‑002740 - - -
R3‑002741 - - -
R3‑002742 - - -
R3‑002743 - - -
R3‑002744 - - -
R3‑002745 Clarification of the handling of UL UU In-and Out-of-sync detection in RNSAP - -
R3‑002746 Clarification of the handling of UL UU In-and Out-of-sync detection in NBAP - -
r3‑002747 Pre-emption Handling Corrections - -
R3‑002748 - - -
R3‑002749 - - -
R3‑002750 - - -
R3‑002751 Uplink outer-loop power control in compressed mode - -
R3‑002752 Uplink outer-loop power control in compressed mode - -
R3‑002753 - - -
R3‑002754 - - -
R3‑002755 - - -
R3‑002756 - - -
R3‑002757 - - -
R3‑002758 - - -
R3‑002759 - - -
R3‑002760 - - -
R3‑002761 - - -
R3‑002762 Liaison Statement on “CN specific DRX cycle length coefficient” R3 -
R3‑002763 - - -
R3‑002765 Update of Physical Channel Reconfiguration procedure text, addressing optional IE’s - -
R3‑002766 Questions on Realistic Maximum Sizes of RRC messages for the CCCH and Number of TFCIs for a Secondary CCPCH R3 -
R3‑002767 Correction of compressed mode handling in the physical channel reconfiguration procedure - -
R3‑002768 - - -
R3‑002769 - - -
R3‑002770 Correction to the Dedicated Measurement Initiation Response and Failure messages - -
R3‑002771 - - -
R3‑002772 Re-ordering of paragraphs for RAB Assignment procedure text - -
R3‑002773 Elementary Procedure interference precedence - -
R3‑002774 - - -
R3‑002775 - - -
R3‑002776 Correction for range of time related to Report Characteristics IE - -
R3‑002777 - - -
R3‑002778 AICH power offset value range - -
R3‑002779 - - -
R3‑002780 Measurement report grouping in Node B - -
R3‑002781 - - -
R3‑002782 - - -
R3‑002783 Handling Unknown Signalling Connection Identifiers in Reset - -
R3‑002784 - - -
R3‑002785 - - -
R3‑002786 RSSI renaming and reference correction - -
R3‑002787 RSSI renaming and reference correction - -
R3‑002788 - - -
R3‑002789 - - -
R3‑002790 - - -
R3‑002791 - - -
R3‑002792 - - -
R3‑002793 - - -
R3‑002794 - - -
R3‑002795 - - -
R3‑002796 - - -
R3‑002797 - - -
R3‑002798 - - -
R3‑002799 - - -
R3‑002800 - - -
R3‑002801 Correction to ASN.1 codes in section 9.3.6 - -
R3‑002802 Editorial correction Rx Timing Deviation control frame - -
R3‑002803 Correction of Iur FACH data frame header - -
R3‑002804 - - -
R3‑002805 - - -
R3‑002806 FACH Capacity Request control frame - -
R3‑002807 Secondary scrambing code used in DL - -
R3‑002808 - - -
R3‑002809 Corrections to Annex A - -
R3‑002810 - - -
R3‑002811 - - -
R3‑002812 Cause values not only for RAB modification - -
R3‑002813 RAB assignment response after successful Initialisation - -
R3‑002814 LS on Size of RANAP messages over MAP-E R3 -
R3‑002815 - - -
R3‑002816 - - -
R3‑002817 CFN/SFN in measurement reporting - -
R3‑002818 Clarification of Measurement Termination at Measurement Object Deletion - -
R3‑002819 Correction of Criticality Information for ASN.1 IEs representing both an IE and a Choice in the Tabular Format - -
R3‑002820 Correction of Criticality Information for ASN.1 IEs representing both an IE and a Choice in the Tabular Format - -
R3‑002821 Questions on Realistic Maximum Sizes of RRC messages for the CCCH and Number of TFCIs for a Secondary CCPCH R3 -
R3‑002822 FP structure redefinintion - -
R3‑002823 - - -
R3‑002824 - - -
R3‑002825 - - -
R3‑002826 - - -
R3‑002827 - - -
R3‑002828 Correction of the behaviour of the Error Indication - -
R3‑002829 Clarification of Location Report Procedure - -
R3‑002830 Transfer Syntax Error description in RANAP - -
R3‑002831 Clarify the value of Report Area IE when the value of Event IE is “Stop” - -
R3‑002832 - - -
R3‑002833 - - -
R3‑002834 - - -
R3‑002835 - - -
R3‑002836 Re-initialisaiton restriction - -
R3‑002838 - - -
R3‑002839 - - -
R3‑002840 Handling of invalid patterns in Compressed Mode - -
R3‑002841 Clarifications to Compressed Mode signalling - -
R3‑002842 - - -
R3‑002843 - - -
R3‑002844 - - -
R3‑002845 Correction of the DL power balancing - -
R3‑002846 Correction of the DL power balancing - -
R3‑002847 - - -
R3‑002848 - - -
R3‑002849 Handling of Iu Signalling Connection Identifier IE - -
R3‑002850 - - -
R3‑002851 Common channel power clarification. - -
R3‑002852 - - -
R3‑002853 Explanation of cause values - -
R3‑002854 Updated RNSAP Synchronised RL Reconfiguration Procedure (Optional IEs) - -
R3‑002855 - - -
R3‑002856 - - -
R3‑002857 - - -
R3‑002858 RESPONSE TO LS ON THE STATUS OF DSCH POWER CONTROL IMPROVEMENT IN SOFT HANDOVER R3 -
r3‑002859 - - -
R3‑002860 LS from WG3 to WG1, answer to LS on Radio Link Initialisation R3 -
R3‑002861 Liaison on the usage of Paging Cause IE in a Paging message R3 -
R3‑002862 - - -
R3‑002863 - - -
R3‑002864 Response to LS (S2-001529) on failure during SRNS Relocation R3 -
R3‑002865 - - -
R3‑002866 - - -
R3‑002867 Reducing the maximum number of signalling connection identities - -
R3‑002868 - - -
R3‑002869 Clarification to the Definition and Usage of Binding Id - -
R3‑002870 Clarification on rules for using the tabular format - -
R3‑002871 Clarification on rules for using the tabular format - -
R3‑002872 - - -
R3‑002873 - - -
r3‑002874 Proposed LS to N4 and S2 on R99 Lossless Relocation for UMTS R3 -
R3‑002875 Real Time SRNS Relocation for PS Domain RABs R3 -
R3‑002876 LS ON THE STUDY/WORK ITEMS WITH RAN WG3 HAVING THE PRIMARY RESPONSIBILITY AND PROGRESS OF OTHER ITEMS R3 -
R3‑002877 PROPOSED Response to LS (R3-002450) on inter-BSC hard handover in GERAN for the packet switched domain R3 -
R3‑002878 Response to "LS on UE Positioning Request transfer during SRNS relocation" R3 -
R3‑002879 - - -
R3‑002884 - - -
R3‑002885 Editorial Corrections - -
R3‑002912 RAB configuration at modification - -

page generated from database: 2019-11-04 12:31:40