3GPP TDocs (written contributions) at meeting
Meeting: R1-09 - 1999-11-30 to 1999-12-03, RADEBEUL
meeting id: R1-09 (click id for more info on this meeting)Click on the Tdoc to open its file.
| TDoc | Title | Source | Remarks |
|---|---|---|---|
| R1‑99a88 | - | - | - |
| R1‑99g43 | - | - | - |
| R1‑99h02 | Text proposal and Change Request for CPCH power control preamble length | Philips, Nokia | - |
| R1‑99h03 | - | - | - |
| R1‑99h04 | - | - | - |
| R1‑99h47 | Removal of superframe notation | - | - |
| R1‑99h76 | - | - | - |
| R1‑99h78 | - | - | - |
| R1‑99h79 | Editorial corrections to TS 25.212 | - | - |
| R1‑99h80 | - | - | - |
| R1‑99h81 | - | - | - |
| R1‑99h82 | - | - | - |
| R1‑99h83 | - | - | - |
| R1‑99h85 | - | - | - |
| R1‑99h86 | - | - | - |
| R1‑99h87 | - | - | - |
| R1‑99h88 | - | - | - |
| R1‑99h89 | Flexible timing of UTRAN response to uplink closed loop Tx diversity feedback commands | - | - |
| R1‑99h90 | - | - | - |
| R1‑99h91 | - | - | - |
| R1‑99h92 | - | - | - |
| R1‑99h93 | - | - | - |
| R1‑99h94 | - | - | - |
| R1‑99h95 | - | - | - |
| R1‑99h96 | - | - | - |
| R1‑99h97 | - | - | - |
| R1‑99h98 | - | - | - |
| R1‑99h99 | - | - | - |
| R1‑99i00 | Restriction for spreading factor 512 allocation in the UTRA FDD Downlink | - | - |
| R1‑99i01 | - | - | - |
| R1‑99i02 | Clarification of closed loop transmit diversity figure in section 8 and closed loop operation in compressed mode for mode 2 in section 8.3 of TS 25.214 | - | - |
| R1‑99i03 | - | - | - |
| R1‑99i04 | - | - | - |
| R1‑99i05 | - | - | - |
| R1‑99i06 | - | - | - |
| R1‑99i07 | - | - | - |
| R1‑99i08 | - | - | - |
| R1‑99i09 | CPCH power control preamble length | - | - |
| R1‑99i10 | - | - | - |
| R1‑99i11 | Consolidation of CPCH Power Control Preamble Information | - | - |
| R1‑99i12 | - | - | - |
| R1‑99i13 | - | - | - |
| R1‑99i14 | Uplink power control in compressed mode | - | - |
| R1‑99i15 | - | - | - |
| R1‑99i16 | - | - | - |
| R1‑99i17 | - | - | - |
| R1‑99i19 | - | - | - |
| R1‑99i20 | - | - | - |
| R1‑99i21 | - | - | - |
| R1‑99i22 | - | - | - |
| R1‑99i23 | - | - | - |
| R1‑99i24 | - | - | - |
| R1‑99i25 | - | - | - |
| R1‑99i26 | - | - | - |
| R1‑99i27 | - | - | - |
| R1‑99i28 | - | - | - |
| R1‑99i29 | - | - | - |
| R1‑99i30 | - | - | - |
| R1‑99i31 | - | - | - |
| R1‑99i32 | - | - | - |
| R1‑99i33 | - | - | - |
| R1‑99i34 | - | - | - |
| R1‑99i35 | - | - | - |
| R1‑99i36 | Removal of TrCH restriction in DSCH CCTrCH | - | - |
| R1‑99i37 | - | - | - |
| R1‑99i38 | 20 ms RACH message length | - | - |
| R1‑99i39 | - | - | - |
| R1‑99i40 | 20 ms RACH message length | - | - |
| R1‑99i41 | - | - | - |
| R1‑99i42 | - | - | - |
| R1‑99i43 | - | - | - |
| R1‑99i44 | - | - | - |
| R1‑99i45 | - | - | - |
| R1‑99i46 | - | - | - |
| R1‑99i47 | Change to the description of TSTD for SCH | - | - |
| R1‑99i48 | - | - | - |
| R1‑99i49 | Update to AICH description | - | - |
| R1‑99i50 | - | - | - |
| R1‑99i51 | - | - | - |
| R1‑99i53 | Removal of SFN multiplexing | - | - |
| R1‑99i54 | - | - | - |
| R1‑99i55 | - | - | - |
| R1‑99i56 | - | - | - |
| R1‑99i58 | Update of channel coding sections | - | - |
| R1‑99i59 | Minimum SF in UL | - | - |
| R1‑99i60 | Update of downlink spreading description | - | - |
| R1‑99i61 | - | - | - |
| R1‑99i62 | Updated modulation description | - | - |
| R1‑99i63 | Removal of open loop power control | - | - |
| R1‑99i64 | Power offset of AICH and PICH | - | - |
| R1‑99i65 | - | - | - |
| R1‑99i66 | Uplink power control maximum TX power | - | - |
| R1‑99i67 | - | - | - |
| R1‑99i68 | Definition of PCCPCH RSCP | - | - |
| R1‑99i69 | Definition of observed time difference to GSM cell | - | - |
| R1‑99i70 | Measurements are done on Primary CPICH | - | - |
| R1‑99i71 | - | - | - |
| R1‑99i72 | Definition of SIR measurement | - | - |
| R1‑99i73 | - | - | - |
| R1‑99i74 | - | - | - |
| R1‑99i75 | - | - | - |
| R1‑99i76 | Removal of Annex A from TS 25.215 | - | - |
| R1‑99i77 | - | - | - |
| R1‑99i78 | - | - | - |
| R1‑99i79 | - | - | - |
| R1‑99i80 | - | - | - |
| R1‑99i81 | Removal of Superframe for TDD | - | - |
| R1‑99i82 | - | - | - |
| R1‑99i84 | - | - | - |
| R1‑99i85 | Primary and Secondary CCPCH in TDD | - | - |
| R1‑99i86 | Primary and Secondary CCPCH in TDD | - | - |
| R1‑99i87 | Primary and Secondary CCPCH in TDD | - | - |
| R1‑99i88 | - | - | - |
| R1‑99i90 | - | - | - |
| R1‑99i91 | - | - | - |
| R1‑99i92 | - | - | - |
| R1‑99i93 | - | - | - |
| R1‑99i94 | Update of rate matching rule for TDD | - | - |
| R1‑99i95 | - | - | - |
| R1‑99i96 | - | - | - |
| R1‑99i97 | - | - | - |
| R1‑99i98 | Corrections to TS25.221 | - | - |
| R1‑99i99 | - | - | - |
| R1‑99j00 | - | - | - |
| R1‑99j01 | - | - | - |
| R1‑99j02 | - | - | - |
| R1‑99j03 | - | - | - |
| R1‑99j04 | - | - | - |
| R1‑99j05 | Modification of the STTD encoding scheme on DL DPCH with SF 512 | - | - |
| R1‑99j06 | - | - | - |
| R1‑99j07 | - | - | - |
| R1‑99j08 | - | - | - |
| R1‑99j09 | - | - | - |
| R1‑99j11 | Changing the initial offset value for convolutional code rate matching | - | - |
| R1‑99j12 | Changing the initial offset value for convolutional code rate matching | - | - |
| R1‑99j13 | Revision of power control timing text | - | - |
| R1‑99j14 | - | - | - |
| R1‑99j15 | - | - | - |
| R1‑99j16 | - | - | - |
| R1‑99j17 | - | - | - |
| R1‑99j18 | - | - | - |
| R1‑99j19 | - | - | - |
| R1‑99j20 | - | - | - |
| R1‑99j21 | - | - | - |
| R1‑99j22 | Definition of Transmitted code power | - | - |
| R1‑99j23 | - | - | - |
| R1‑99j24 | Cleanup of synchronisation procedures | - | - |
| R1‑99j25 | Clarification of bit separation and collection | - | - |
| R1‑99j26 | Modifications to STTD text (*1) | - | - |
| R1‑99j27 | - | - | - |
| R1‑99j28 | - | - | - |
| R1‑99j29 | - | - | - |
| R1‑99j30 | - | - | - |
| R1‑99j31 | - | - | - |
| R1‑99j32 | - | - | - |
| R1‑99j33 | - | - | - |
| R1‑99j34 | Code allocation for Case 3 | - | - |
| R1‑99j35 | - | - | - |
| R1‑99j36 | - | - | - |
| R1‑99j37 | Update of Random Access Procedure | - | - |
| R1‑99j38 | - | - | - |
| R1‑99j39 | - | - | - |
| R1‑99j40 | - | - | - |
| R1‑99j41 | - | - | - |
| R1‑99j42 | - | - | - |
| R1‑99j45 | - | - | - |
| R1‑99j46 | - | - | - |
| R1‑99j47 | - | - | - |
| R1‑99j48 | - | - | - |
| R1‑99j49 | - | - | - |
| R1‑99j50 | - | - | - |
| R1‑99j51 | - | - | - |
| R1‑99j52 | - | - | - |
| R1‑99j53 | - | - | - |
| R1‑99j54 | - | - | - |
| R1‑99j55 | - | - | - |
| R1‑99j56 | - | - | - |
| R1‑99j57 | - | - | - |
| R1‑99j58 | - | - | - |
| R1‑99j59 | Out-of-synch handling | - | - |
| R1‑99j61 | Sliding paging indicators | - | - |
| R1‑99j62 | - | - | - |
| R1‑99j63 | - | - | - |
| R1‑99j64 | - | - | - |
| R1‑99j65 | - | - | - |
| R1‑99j66 | - | - | - |
| R1‑99j67 | - | - | - |
| R1‑99j68 | - | - | - |
| R1‑99j69 | - | - | - |
| R1‑99j70 | - | - | - |
| R1‑99j71 | - | - | - |
| R1‑99j72 | - | - | - |
| R1‑99j73 | - | - | - |
| R1‑99j74 | - | - | - |
| R1‑99j75 | - | - | - |
| R1‑99j76 | Uplink TX timing adjustment | - | - |
| R1‑99j77 | - | - | - |
| R1‑99j78 | - | - | - |
| R1‑99j79 | - | - | - |
| R1‑99j80 | - | - | - |
| R1‑99j81 | - | - | - |
| R1‑99j82 | - | - | - |
| R1‑99j83 | - | - | - |
| R1‑99j84 | - | - | - |
| R1‑99j85 | - | - | - |
| R1‑99j86 | - | - | - |
| R1‑99j87 | - | - | - |
| R1‑99j88 | - | - | - |
| R1‑99j89 | - | - | - |
| R1‑99j90 | - | - | - |
| R1‑99j91 | Setting of beta values for multi-code | - | - |
| R1‑99j92 | - | - | - |
| R1‑99j93 | - | - | - |
| R1‑99j94 | - | - | - |
| R1‑99j95 | - | - | - |
| R1‑99j96 | - | - | - |
| R1‑99j97 | Correction of rate matching parameters for repetition after 1st Interleaving in 25.222 | - | - |
| R1‑99j98 | - | - | - |
| R1‑99j99 | - | - | - |
| R1‑99k00 | - | - | - |
| R1‑99k01 | - | - | - |
| R1‑99k02 | - | - | - |
| R1‑99k03 | - | - | - |
| R1‑99k04 | Editorial corrections to TS 25.222 | - | - |
| R1‑99k05 | Harmonization of notations for downlink scrambling codes | - | - |
| R1‑99k06 | - | - | - |
| R1‑99k07 | Clarification of bit separation and collection | - | - |
| R1‑99k08 | - | - | - |
| R1‑99k09 | Rate matching parameter determination in DL and fixed positions | - | - |
| R1‑99k10 | - | - | - |
| R1‑99k11 | - | - | - |
| R1‑99k12 | Update of TS 25.213 uplink parts | - | - |
| R1‑99k13 | - | - | - |
| R1‑99k14 | - | - | - |
| R1‑99k15 | - | - | - |
| R1‑99k16 | Inclusion of idle periods for the IPDL LCS | - | - |
| R1‑99k17 | - | - | - |
| R1‑99k21 | - | - | - |
| R1‑99k22 | - | - | - |
| R1‑99k23 | - | - | - |
| R1‑99k24 | - | - | - |
| R1‑99k25 | - | - | - |
| R1‑99k26 | - | - | - |
| R1‑99k27 | - | - | - |
| R1‑99k28 | Correction of SFN-SFN observed time difference | - | - |
| R1‑99k29 | - | - | - |
| R1‑99k30 | - | - | - |
| R1‑99k31 | - | - | - |
| R1‑99k32 | - | - | - |
| R1‑99k33 | - | - | - |
| R1‑99k34 | - | - | - |
| R1‑99k35 | - | - | - |
| R1‑99k36 | - | - | - |
| R1‑99k37 | - | - | - |
| R1‑99k38 | - | - | - |
| R1‑99k39 | - | - | - |
| R1‑99k41 | - | - | - |
| R1‑99k42 | - | - | - |
| R1‑99k43 | Corrections to TS 25.212 | - | - |
| R1‑99k44 | - | - | - |
| R1‑99k46 | - | - | - |
| R1‑99k47 | - | - | - |
| R1‑99k48 | - | - | - |
| R1‑99k49 | - | - | - |
| R1‑99k50 | - | - | - |
| R1‑99k51 | Consolidation of Power Control Information for DCH Initialisation | - | - |
| R1‑99k52 | Timing for initialisation procedures | - | - |
| R1‑99k56 | Primary and Secondary CCPCH in TDD | - | - |
| R1‑99k57 | Introduction of TFCI for S-CCPCH in TDD mode | - | - |
| R1‑99k58 | Transmission of TFCI bits for TDD | - | - |
| R1‑99k60 | Midamble Allocation in UTRA TDD | - | - |
| R1‑99k61 | Clarifications for Spreading in UTRA TDD | - | - |
| R1‑99k62 | Alignment of Terminology Regarding Spreading for TDD Mode | - | - |
| R1‑99k63 | Alignment of Terminology Regarding Spreading for TDD Mode | - | - |
| R1‑99k66 | - | - | - |
| R1‑99k67 | TFCI coding and mapping including compressed mode | - | - |
| R1‑99k68 | TFCI coding and mapping in TDD | - | - |
| R1‑99k69 | Maximum Tx power at uplink, compressed mode | - | - |
| R1‑99k70 | - | - | - |
| R1‑99k71 | - | - | - |
| R1‑99k76 | - | - | - |
| R1‑99k77 | - | - | - |
| R1‑99k78 | Setting of power in uplink compressed mode | - | - |
| R1‑99k79 | Introduction of compressed mode by higher layer scheduling | - | - |
| R1‑99k80 | Introduction of compressed mode by higher layer scheduling | - | - |
| R1‑99k81 | Physical channel BER on DPCCH | - | - |
| R1‑99k82 | Modification of BTFD description in 25.212 Annex | - | - |
| R1‑99k83 | CPCH codes in power control preamble | - | - |
| R1‑99k84 | STTD capability for P-CCPCH, TDD component | - | - |
| R1‑99k85 | Block STTD capability for P-CCPCH, TDD component | - | - |
| R1‑99k86 | - | - | - |
| R1‑99k87 | - | - | - |
| R1‑99k89 | - | - | - |
| R1‑99k90 | - | - | - |
| R1‑99k91 | - | - | - |
| R1‑99k92 | - | - | - |
| R1‑99k94 | - | - | - |
| R1‑99k95 | - | - | - |
| R1‑99k96 | - | - | - |
| R1‑99k97 | - | - | - |
| R1‑99k98 | - | - | - |
| R1‑99l01 | Ranges and resolution of timing measurements | - | - |
| R1‑99l02 | Range and resolution of BLER measurements | - | - |
| R1‑99l03 | CFN-SFN measurement with compressed mode | - | - |
| R1‑99l04 | Downlink power control | - | - |
| R1‑99l05 | - | - | - |
| R1‑99l07 | Editorial corrections | - | - |
| R1‑99l08 | - | - | - |
| R1‑99l09 | New sections: 5.1.15 - UE GPS Timing of Cell Frames for LCS; 5.2.8 UTRAN GPS Timing of Cell Frames for LCS | - | - |
| R1‑99l10 | Range and resolution for RF related measurements | - | - |
| R1‑99l11 | - | - | - |
| R1‑99l12 | Correction to code allocation for compressed mode | - | - |
| R1‑99l13 | - | - | - |
| R1‑99l14 | Editorial Change | - | - |
| R1‑99l15 | Correction (Editorial Change) | - | - |
| R1‑99l17 | - | - | - |
| R1‑99l18 | - | - | - |
| R1‑99l19 | - | - | - |
| R1‑99l20 | - | - | - |
| R1‑99l21 | 20 ms RACH message length | - | - |
| R1‑99l22 | Soft symbol combining for uplink power control | - | - |
| R1‑99l24 | - | - | - |
| R1‑99l25 | - | - | - |
| R1‑99l26 | Connection between TTI and CFN | - | - |
| R1‑99l27 | Zero length transport blocks | - | - |
| R1‑99l29 | TAB structure and timing relation for USTS | - | - |
| R1‑99l30 | Channelization Code Allocation for USTS | - | - |
| R1‑99l31 | - | - | - |
| R1‑99l32 | - | - | - |
| R1‑99l33 | - | - | - |
| R1‑99l34 | - | - | - |
| R1‑99l35 | - | - | - |
| R1‑99l36 | - | - | - |
| R1‑99l37 | Modified physical channel mapping scheme | - | - |
| R1‑99l38 | - | - | - |
| R1‑99l39 | - | - | - |
| R1‑99l40 | - | - | - |
| R1‑99l41 | - | - | - |
| R1‑99l42 | Clarifications for compressed mode parameters | - | - |
| R1‑99l43 | Update concerning measurement definitions, ranges and mappings | - | - |
| R1‑99l44 | - | - | - |
| R1‑99l45 | - | - | - |
| R1‑99l48 | - | - | - |
| R1‑99l49 | - | - | - |
| R1‑99l50 | CPICH SIR measurement | - | - |
| R1‑99l51 | - | - | - |
| R1‑99l52 | - | - | - |
| R1‑99l53 | - | - | - |
| R1‑99l54 | - | - | - |
| R1‑99l55 | - | - | - |
| R1‑99l56 | - | - | - |
| R1‑99l57 | - | - | - |
| R1‑99l58 | - | - | - |
| R1‑99l59 | Inclusion of adjustment loop in downlink power control | - | - |
| R1‑99l60 | - | - | - |
| R1‑99l61 | - | - | - |
| R1‑99l62 | - | - | - |
| R1‑99l63 | - | - | - |
| R1‑99l64 | - | - | - |
| R1‑99l65 | - | - | - |
| R1‑99l66 | - | - | - |
| R1‑99l67 | Support of short codes for CPCH | - | - |
| R1‑99l68 | Introduction of the timeslot formats to the TDD specifications | - | - |
| R1‑99l69 | - | - | - |
| R1‑99l70 | State update rule addition to SSDT specification | - | - |
| R1‑99l71 | - | - | - |
| R1‑99l72 | - | - | - |
| R1‑99l73 | - | - | - |
| R1‑99l74 | - | - | - |
page generated from database: 2024-04-13 13:51:47