The 5G Standard

3GPP TDocs (written contributions) at meeting

Meeting: R4-14 - 2000-11-13 to 2000-11-17, Sophia Antipolis

meeting id: R4-14 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R4‑000784 - - -
R4‑000785 - - -
R4‑000786 - - -
R4‑000787 - - -
R4‑000788 Correction for 25.102 concerning UE maximum output power classes - -
R4‑000789 Correction for 25.102 concerning the coexistence of TDD and FDD in the same band - -
R4‑000790 - - -
R4‑000791 - - -
R4‑000792 - - -
R4‑000793 - - -
R4‑000794 - - -
R4‑000795 - - -
R4‑000797 - - -
R4‑000798 - - -
R4‑000799 - - -
R4‑000800 - - -
R4‑000801 - - -
R4‑000802 - - -
R4‑000803 - - -
R4‑000804 - - -
R4‑000805 Received total wideband power - -
R4‑000806 - - -
R4‑000807 - - -
R4‑000808 - - -
R4‑000809 - - -
R4‑000810 - - -
R4‑000811 - - -
R4‑000812 - - -
R4‑000813 - - -
R4‑000814 - - -
R4‑000815 - - -
R4‑000816 - - -
R4‑000817 - - -
R4‑000818 Clarifications for EVM and PCDE measurement with respect to inclusion of the SCH - -
R4‑000819 - - -
R4‑000820 - - -
R4‑000821 Clarifications for EVM definition - -
R4‑000822 - - -
R4‑000823 - - -
R4‑000824 - - -
R4‑000825 - - -
R4‑000826 - - -
R4‑000827 - - -
R4‑000828 - - -
R4‑000829 - - -
R4‑000830 Correction of Out-of-Sync criteria in 25.102 - -
R4‑000831 - - -
R4‑000832 - - -
R4‑000833 Total power dynamic range in 25.141 - -
R4‑000834 - - -
R4‑000835 - - -
R4‑000836 - - -
R4‑000837 - - -
R4‑000838 - - -
R4‑000839 - - -
R4‑000840 Editorial corrections on TS25.141, sections for test conditions - -
R4‑000841 - - -
R4‑000842 - - -
R4‑000843 - - -
R4‑000844 - - -
R4‑000845 - - -
R4‑000846 - - -
R4‑000847 - - -
R4‑000848 - - -
R4‑000849 - - -
R4‑000850 - - -
R4‑000851 - - -
R4‑000852 - - -
R4‑000853 - - -
R4‑000854 Conformance test description for frequency stability - -
R4‑000855 Conformance test description for inner loop power control - -
R4‑000856 Conformance test description for power control dynamic range - -
R4‑000857 Conformance test description for transmit ON/OFF power - -
R4‑000858 Conformance test description for occupied bandwidth - -
R4‑000859 Conformance test description for performance requirements - -
R4‑000860 - - -
R4‑000862 - - -
R4‑000863 Removal of cell selection delay requirements - -
R4‑000864 Clarification of the random access requirements - -
R4‑000865 - - -
R4‑000866 Correction of RRC re-establishment requirements - -
R4‑000867 - - -
R4‑000868 Event triggered reporting in AWGN conditions - -
R4‑000869 Inter frequency measurements in AWGN - -
R4‑000871 Physical channel BER accuracy - -
R4‑000873 Event triggered reporting in fading conditions - -
R4‑000874 - - -
R4‑000875 Periodic reporting in AWGN - -
R4‑000877 - - -
R4‑000878 - - -
R4‑000879 - - -
R4‑000880 - - -
R4‑000881 - - -
R4‑000882 - - -
R4‑000883 - - -
R4‑000884 - - -
R4‑000885 Proposed CR to TS 25.101 on subclause 7.8 RX Intermodulation - -
R4‑000886 - - -
R4‑000887 - - -
R4‑000888 - - -
R4‑000889 - - -
R4‑000890 - - -
R4‑000891 - - -
R4‑000893 - - -
R4‑000894 - - -
R4‑000895 Introduction of UE Rx-Tx time difference type 1 & 2 - -
R4‑000896 Correction of UE Tx timing adjustment - -
R4‑000897 - - -
R4‑000898 - - -
R4‑000899 resolution of time measurements R4 -
R4‑000900 - - -
R4‑000901 Corrections to DL compressed mode tests in TS 25.101 - -
R4‑000902 Correction to DL 384 kbps and BTFD measurement channels - -
R4‑000903 - - -
R4‑000904 - - -
R4‑000905 - - -
R4‑000906 - - -
R4‑000907 - - -
R4‑000908 - - -
R4‑000909 - - -
R4‑000910 - - -
R4‑000911 - - -
R4‑000912 - - -
R4‑000913 - - -
R4‑000914 - - -
R4‑000915 - - -
R4‑000917 Compressed mode, proposal for specification - -
R4‑000918 - - -
R4‑000919 - - -
R4‑000920 - - -
R4‑000921 Re-structuring TS 25.123 Section 3 - -
R4‑000922 - - -
R4‑000923 Re-structuring TS 25.123 Section 4+A4 - -
R4‑000924 - - -
R4‑000925 Re-structuring TS 25.123 Section 5 - -
R4‑000926 - - -
R4‑000927 Re-structuring TS 25.123 Section A5 - -
R4‑000928 - - -
R4‑000929 Re-structuring TS 25.123 Section 6+7 - -
R4‑000930 - - -
R4‑000931 Re-structuring TS 25.123 Section 8+A8 - -
R4‑000932 - - -
R4‑000933 Re-structuring TS 25.123 Section 9+A9 - -
R4‑000934 - - -
R4‑000935 Re-structuring TS 25.123 Annex A1-3 - -
R4‑000936 - - -
R4‑000937 - - -
R4‑000938 - - -
R4‑000939 Clarification of the mentioned parameter alpha - -
R4‑000940 - - -
R4‑000941 - - -
R4‑000942 Alignment of intra frequency CPICH Ec/Io measurement requirements in TS25.133 - -
R4‑000943 - - -
R4‑000944 - - -
R4‑000945 Multiple neighbour test cases - -
R4‑000946 - - -
R4‑000947 - - -
R4‑000948 - - -
R4‑000949 - - -
R4‑000951 - - -
R4‑000952 - - -
R4‑000953 - - -
R4‑000954 - - -
R4‑000955 - - -
R4‑000956 - - -
R4‑000957 - - -
R4‑000958 - - -
R4‑000959 - - -
R4‑000960 - - -
R4‑000961 - - -
R4‑000962 - - -
R4‑000963 Editorial correction to uplink reference channel for 2048kbps - -
R4‑000964 Editorial correction to uplink reference channel for 2048kbps. - -
R4‑000965 Editorial correction to ACLR test - -
R4‑000966 - - -
R4‑000967 Correction to reference measurement channels - -
R4‑000968 - - -
R4‑000969 Reply to LS on RSSI measurement R4 -
R4‑000971 - - -
R4‑000972 - - -
R4‑000973 RX spurious emissions - -
R4‑000974 - - -
R4‑000975 - - -
R4‑000976 - - -
R4‑000977 - - -
R4‑000978 - - -
R4‑000979 Alignments with other EMC standards - -
R4‑000980 - - -
R4‑000981 Correction of intra- and inter frequency measurement requirement. - -
R4‑000982 Correction for 25.105 concerning the channel number calculation. - -
R4‑000983 - - -
R4‑000984 - - -
R4‑000985 Correction of TDD measurement requirements. - -
R4‑000986 - - -
R4‑000987 - - -
R4‑000988 - - -
R4‑000989 Corrections of values, references and structures of test cases - -
R4‑000990 Definition of multi-code OCNS signal for receiver and performance tests - -
R4‑000991 - - -
R4‑000992 - - -
R4‑000993 General cell re-selection requirements - -
R4‑000994 BSIC verification requirements in TS25.133 - -
R4‑000995 GSM RSSI measurement - -
R4‑000996 Clarification of parallel measurement section - -
R4‑000997 - - -
R4‑000998 LS on 1.28 Mcps TDD and 3.84 Mcps TDD co-existence studies in RAN4 (answer to R1-00-1321) R4 -
R4‑000999 - - -
R4‑001000 Test tolerance for Base station output power - -
R4‑001001 Correction for the immunity measurement - -
R4‑001002 Annex explaining implemntation of Test tolerance to Tests - -

page generated from database: 2024-03-25 09:25:51

Get news. Get knowledge. Get involved
Get news.
Get knowledge.
Get involved.
Image
The 5G Standard
3GPP General Enquiries:
info@3gpp.org 


Connect:

Quick Links