The 5G Standard

3GPP TDocs (written contributions) at meeting

Meeting: R3-12 - 2000-04-10 to 2000-04-15, KOREA

meeting id: R3-12 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R3‑000987 - - -
R3‑000989 - - -
R3‑000990 - - -
R3‑000991 - - -
R3‑000992 - - -
R3‑000993 - - -
R3‑000994 - - -
R3‑000995 - - -
R3‑000996 - - -
R3‑000997 - - -
R3‑000998 - - -
R3‑000999 - - -
R3‑001000 - - -
R3‑001001 - - -
R3‑001002 - - -
R3‑001003 - - -
R3‑001004 - - -
R3‑001005 - - -
R3‑001006 - - -
R3‑001007 - - -
R3‑001008 - - -
R3‑001009 - - -
R3‑001010 - - -
R3‑001011 - - -
R3‑001012 - - -
R3‑001013 - - -
R3‑001014 - - -
R3‑001015 - - -
R3‑001016 - - -
R3‑001017 - - -
R3‑001018 - - -
R3‑001020 - - -
R3‑001021 - - -
R3‑001022 - - -
R3‑001023 - - -
R3‑001024 - - -
R3‑001025 - - -
R3‑001026 - - -
R3‑001027 - - -
R3‑001028 - - -
R3‑001029 - - -
R3‑001030 - - -
R3‑001031 - - -
R3‑001032 - - -
R3‑001033 - - -
R3‑001034 - - -
R3‑001035 - - -
R3‑001036 - - -
R3‑001037 - - -
R3‑001038 - - -
R3‑001039 - - -
R3‑001040 - - -
R3‑001041 - - -
R3‑001042 - - -
R3‑001043 - - -
R3‑001044 - - -
R3‑001045 - - -
R3‑001046 - - -
R3‑001047 - - -
R3‑001048 - - -
R3‑001049 - - -
R3‑001050 - - -
R3‑001052 - - -
R3‑001053 - - -
R3‑001054 - - -
R3‑001055 - - -
R3‑001056 - - -
R3‑001057 - - -
R3‑001058 - - -
R3‑001059 - - -
R3‑001060 - - -
R3‑001061 - - -
R3‑001062 - - -
R3‑001063 - - -
R3‑001064 - - -
R3‑001065 - - -
R3‑001066 - - -
R3‑001067 - - -
R3‑001068 - - -
R3‑001069 - - -
R3‑001070 - - -
R3‑001071 - - -
R3‑001072 - - -
R3‑001073 Correction of PDU type - -
R3‑001074 Addition of table headings - -
R3‑001075 - - -
R3‑001076 Version of the specified mode - -
R3‑001077 - - -
R3‑001078 - - -
R3‑001079 - - -
R3‑001080 - - -
R3‑001081 - - -
R3‑001082 - - -
R3‑001083 - - -
R3‑001084 - - -
R3‑001085 - - -
R3‑001086 - - -
R3‑001087 - - -
R3‑001088 - - -
R3‑001089 - - -
R3‑001090 - - -
R3‑001091 - - -
R3‑001092 - - -
R3‑001093 - - -
R3‑001098 - - -
R3‑001099 - - -
R3‑001100 - - -
R3‑001102 - - -
R3‑001103 - - -
R3‑001104 - - -
R3‑001105 - - -
R3‑001106 - - -
R3‑001107 - - -
R3‑001108 - - -
R3‑001109 - - -
R3‑001110 - - -
R3‑001111 - - -
R3‑001112 - - -
R3‑001113 - - -
R3‑001114 Change of cell definition - -
R3‑001115 Introduction of RLS in 25.401 - -
R3‑001116 Introduction of RLS in 25.423 - -
R3‑001117 - - -
R3‑001118 - - -
R3‑001119 - - -
R3‑001120 - - -
R3‑001121 - - -
R3‑001122 - - -
R3‑001123 - - -
R3‑001124 - - -
R3‑001125 - - -
R3‑001126 RNSAP range bounds in ASN.1 description: FDD parts - -
R3‑001127 NBAP range bounds in ASN.1 description: FDD parts - -
R3‑001128 Update TS25.430 Cell model so that number of PICH in a Cell equals 0-i (same bound as set for number of Secondary CCPCH in a Cell). - -
R3‑001129 Clarification of FQC description - -
R3‑001130 Introduction of RTT measurement - -
R3‑001131 Introduction of RTT measurement - -
R3‑001132 Measurement filtering parameters - -
R3‑001133 Measurement filtering parameters - -
R3‑001134 - - -
R3‑001135 - - -
R3‑001136 Add "NULL" for only one component to choose in ASN.1 CHOICE type-25.433. - -
R3‑001137 Add "NULL" for only one component to choose in ASN.1 CHOICE type-25.423. - -
R3‑001138 Change INTEGER to ENUMERATED for Paging Indicator Length, IB SG REP IE and TGL IE-25.433 - -
R3‑001139 Change INTEGER to ENUMERATED for IB SG REP IE and TGL IE--25.423 - -
R3‑001140 - - -
R3‑001141 - - -
R3‑001142 Alignment of Transaction ID IE with NBAP - -
R3‑001143 - - -
r3‑001144 - - -
R3‑001145 - - -
R3‑001146 - - -
R3‑001147 - - -
R3‑001148 - - -
R3‑001149 Clarification of Payload CRC Field (Iu FP) - -
R3‑001150 - - -
R3‑001151 - - -
R3‑001152 Clarification of Payload CRC Field (DCH FP) - -
R3‑001153 Correction for Maximum Bitrate and Guarantee Bitrate in ASN.1 - -
R3‑001156 Clarifications for Location Reporting Control and Location Report procedures - -
R3‑001157 Preservation of Tracing initiation data in connection with Relocation - -
R3‑001158 Clarification of when RELOCATION REQUIRED can be sent - -
R3‑001159 Clarification of when to release failed RABs at Relocation - -
R3‑001160 Interactions between RAB Assignment messages - -
R3‑001161 Cause values are missing for Abstract Syntax Errors - -
R3‑001162 RRC container references - -
R3‑001163 RNC-ID needed in connectionless messages sent from RNC - -
R3‑001165 - - -
R3‑001166 - - -
R3‑001167 - - -
R3‑001168 - - -
R3‑001169 IEs missing within Reset Resource messages - -
R3‑001170 - - -
R3‑001171 Interaction between Reset Resource and Signalling Transport Layer Supervision - -
R3‑001172 - - -
R3‑001173 - - -
R3‑001174 - - -
R3‑001175 - - -
R3‑001176 - - -
R3‑001177 - - -
R3‑001178 - - -
R3‑001179 - - -
R3‑001181 - - -
R3‑001182 - - -
R3‑001183 - - -
R3‑001184 - - -
R3‑001185 - - -
R3‑001186 Introduction of state information in procedure description - -
R3‑001187 - - -
R3‑001189 - - -
R3‑001191 - - -
R3‑001192 NBAP range bounds, TDD parts - -
R3‑001193 RNSAP range bounds, TDD parts - -
R3‑001194 - - -
R3‑001196 - - -
R3‑001197 Modification to TFS definition [NBAP] - -
R3‑001198 Modification to TFS definition [RNSAP] - -
R3‑001199 Change quality estimate to 8 bits - -
R3‑001200 Update of Paging Indication bitmap description - -
R3‑001201 - - -
r3‑001202 - - -
R3‑001204 DCH and DSCH information response in RL Reconfiguration Ready message - -
R3‑001205 DCH information response in RL Reconfiguration Ready message - -
R3‑001208 - - -
R3‑001209 - - -
R3‑001210 Clarification on the Combining Control field - -
R3‑001211 - - -
R3‑001212 - - -
R3‑001213 Rules for messages that shall contain the CN Domain indicator IE - -
R3‑001214 Range of the Signalling Connection Identifier IE - -
R3‑001215 - - -
R3‑001216 Correction of RANAP tabular notation and ASN.1 - -
R3‑001217 - - -
R3‑001218 - - -
R3‑001219 Handling of closed loop timing mode over RNSAP - -
R3‑001220 - - -
r3‑001221 Inclusion of PDP type in RANAP - -
R3‑001222 - - -
R3‑001223 Support of RRC session releasing - -
R3‑001224 - - -
R3‑001227 - - -
R3‑001228 - - -
R3‑001229 - - -
R3‑001230 Clarification of system info broadcast procedure - -
R3‑001231 Addition of FP PC transmission timing IE in Cell Setup - -
R3‑001232 - - -
R3‑001233 Correction on the definition of RSSI parameter - -
R3‑001234 - - -
R3‑001235 - - -
R3‑001237 - - -
R3‑001239 - - -
R3‑001240 Redefinition of coordinated DCHs - -
R3‑001243 - - -
R3‑001244 Clarification to section 9 - -
R3‑001245 - - -
R3‑001246 - - -
R3‑001247 - - -
R3‑001248 - - -
R3‑001249 - - -
R3‑001250 - - -
R3‑001251 - - -
R3‑001252 - - -
R3‑001253 - - -
R3‑001254 - - -
R3‑001255 Sync Parameter configuration via NBAP - -
R3‑001256 Out-of Sync RNSAP - -
R3‑001257 Correction to the limited power increase parameter - -
R3‑001258 Correction to the limited power increase parameter - -

page generated from database: 2024-04-22 07:58:53

Get news. Get knowledge. Get involved
Get news.
Get knowledge.
Get involved.
Image
The 5G Standard
3GPP General Enquiries:
info@3gpp.org 


Connect:

Quick Links