The 5G Standard

3GPP TDocs (written contributions) at meeting

Meeting: R2-13 - 2000-05-22 to 2000-05-26, Kapolei

meeting id: R2-13 (click id for more info on this meeting)

Click on the Tdoc to open its file.

TDoc Title Source Remarks
R2‑000953 - - -
R2‑000954 - - -
R2‑000955 - - -
R2‑000956 - - -
R2‑000957 - - -
R2‑000958 - - -
R2‑000959 - - -
R2‑000960 - - -
R2‑000961 - - -
R2‑000962 - - -
R2‑000963 - - -
R2‑000964 - - -
R2‑000965 - - -
R2‑000966 - - -
R2‑000967 - - -
R2‑000968 - - -
R2‑000969 - - -
R2‑000970 - - -
R2‑000971 End of CPCH transmission - -
R2‑000972 End of CPCH transmission - -
R2‑000974 IEs on SIB5/6 - -
R2‑000975 RACH Transmission parameters - -
R2‑000976 SCCPCH System Info - -
R2‑000977 Addition of HFN for RRC CONNECTION RE-ESTABLISHMENT COMPLETE - -
R2‑000978 - - -
R2‑000979 Usage of Transport CH ID - -
R2‑000980 System information modification procedure - -
R2‑000981 - - -
R2‑000982 - - -
R2‑000983 - - -
R2‑000984 Security capability - -
R2‑000985 - - -
R2‑000986 Signalling connection release request - -
R2‑000987 Change to IMEI coding from BCD to hexadecimal - -
R2‑000988 Removal of CPICH SIR measurement quantity - -
R2‑000989 Addition of the length of PDCP sequence numbers into PDCP info - -
R2‑000990 - - -
R2‑000991 - - -
R2‑000993 - - -
R2‑000994 - - -
R2‑000995 - - -
R2‑000996 Signalling of IEs related to System Information on FACH - -
R2‑000998 - - -
R2‑000999 - - -
R2‑001000 - - -
R2‑001001 Clarification of ciphering parameters - -
R2‑001002 - - -
R2‑001003 - - -
R2‑001004 - - -
R2‑001005 - - -
R2‑001006 - - -
R2‑001007 Clarification of RLC Transparent Mode operation - -
R2‑001008 - - -
R2‑001009 - - -
R2‑001010 UE variables - -
R2‑001011 General error handling - -
R2‑001012 PLMN type selection - -
R2‑001013 - - -
R2‑001014 Common channel configurations - -
R2‑001015 - - -
R2‑001016 - - -
R2‑001017 - - -
R2‑001018 - - -
R2‑001019 - - -
R2‑001020 - - -
R2‑001021 Protocol extensions in ASN - -
R2‑001022 - - -
R2‑001023 - - -
R2‑001024 - - -
R2‑001025 Measurements of RACH and CPCH - -
R2‑001026 - - -
R2‑001027 - - -
R2‑001028 - - -
R2‑001029 - - -
R2‑001030 - - -
R2‑001032 - - -
R2‑001033 - - -
R2‑001034 - - -
R2‑001036 - - -
R2‑001037 - - -
R2‑001038 - - -
R2‑001039 - - -
R2‑001040 - - -
R2‑001041 - - -
R2‑001042 - - -
R2‑001043 Editorial modification on ASN.1 description - -
R2‑001044 Re-establishment timer - -
R2‑001046 Modification on Measurement IE - -
R2‑001047 - - -
R2‑001048 Transport format combination set - -
R2‑001049 - - -
R2‑001050 Modification to measurement event evaluation - -
R2‑001051 System Information related parameters - -
R2‑001052 - - -
R2‑001053 - - -
R2‑001054 - - -
R2‑001055 - - -
R2‑001056 - - -
R2‑001057 - - -
R2‑001058 - - -
R2‑001059 - - -
R2‑001060 - - -
R2‑001061 - - -
R2‑001062 - - -
R2‑001063 Editorial corrections to PRACH system information and Cell info - -
R2‑001064 Editorial Corrections to 25.331 Procedures and Tabular Format - -
R2‑001065 - - -
R2‑001066 Corrections on use of ORDERED_CONFIG - -
R2‑001067 - - -
R2‑001068 - - -
R2‑001069 - - -
R2‑001070 Corrections to Transparent mode signalling info Tabular format and ASN.1 - -
R2‑001071 Corrections to Soft Handover messages and procedures - -
R2‑001072 - - -
R2‑001073 Corrections to RRC CONNECTION REJECT procedures - -
R2‑001074 - - -
R2‑001075 Editorial corrections to abbreviations, SCCH, BCCH - -
R2‑001076 Correction to usage of primary CCPCH info and primary CPICH info - -
R2‑001077 - - -
R2‑001078 - - -
R2‑001079 - - -
R2‑001080 - - -
R2‑001081 - - -
R2‑001082 - - -
R2‑001083 - - -
R2‑001084 - - -
R2‑001085 Addition of out-of-sync-configuration control primitives - -
R2‑001086 Out-of-synch corrections - -
R2‑001087 - - -
R2‑001089 - - -
R2‑001090 - - -
R2‑001091 - - -
R2‑001093 Signalling of partial failure in radio bearer related procedures - -
R2‑001094 - - -
R2‑001095 Corrections to measurement control descriptions and messages - -
R2‑001096 - - -
R2‑001097 Addition of the Segmentation indication field for transparent mode RLC in the RLC Info - -
R2‑001098 - - -
R2‑001099 - - -
R2‑001100 - - -
R2‑001101 - - -
R2‑001102 - - -
R2‑001103 - - -
R2‑001104 - - -
R2‑001105 - - -
R2‑001106 - - -
R2‑001107 - - -
R2‑001108 - - -
R2‑001109 - - -
R2‑001110 - - -
R2‑001111 - - -
R2‑001112 - - -
R2‑001113 Transport Format Combination Control - -
R2‑001114 System Information extensibility in ASN.1 definitions - -
R2‑001115 - - -
R2‑001116 DPCCH power control preamble - -
R2‑001117 - - -
R2‑001118 Choice of Initial UE Identity - -
R2‑001119 ANSI-41 information elements - -
R2‑001120 - - -
R2‑001121 - - -
R2‑001122 - - -
R2‑001123 - - -
R2‑001124 - - -
R2‑001125 CPCH note to the the parameter definitions - -
R2‑001126 DRX cycle lower limit - -
R2‑001127 - - -
R2‑001128 - - -
R2‑001129 Addition of propagation delay measurement - -
R2‑001130 - - -
R2‑001131 - - -
R2‑001134 - - -
R2‑001135 - - -
R2‑001136 Clarification of OTDOA signalling operation - -
R2‑001137 - - -
R2‑001138 - - -
R2‑001139 - - -
R2‑001140 Updated RLC SDL - -
R2‑001141 Correction to RLC - -
R2‑001142 - - -
R2‑001143 Traffic Volume Monitoring - -
R2‑001144 Traffic Volume Measurement for dynamic radio bearer control - -
R2‑001145 Signalling radio bearers - -
R2‑001146 - - -
R2‑001148 - - -
R2‑001149 Access Control - -
R2‑001150 Editorial additions - -
R2‑001151 SFN Transmission Rate and the Need to Maintain CFN in TDD Mode - -
R2‑001153 Corrections of CPCH Emergency stop and start of message Indicator - -
R2‑001154 Refinement of the definition of a Transport Block - -
R2‑001155 CPCH MAC procedures - -
R2‑001156 Response to liaison statement on hexadecimal IMEI format (S1-000370) R2 -
R2‑001157 - - -
R2‑001158 - - -
R2‑001159 - - -
R2‑001160 - - -
R2‑001161 - - -
R2‑001162 - - -
R2‑001163 RRC connection release procedure - -
R2‑001164 GPS time-of-week represented as seconds and fractions of seconds - -
R2‑001165 - - -
R2‑001167 - - -
R2‑001168 CPCH Status Indication mode correction - -
R2‑001169 - - -
R2‑001170 - - -
R2‑001171 RRC message size optimisation regarding TrCH parameters - -
R2‑001172 - - -
R2‑001173 Optimisation of System Information - -
R2‑001174 - - -
R2‑001175 CPCH gain factor - -
R2‑001176 SFN Transmission Rate in TDD Mode - -
R2‑001177 Integrity Control - -
R2‑001178 Changes in RB mapping info - -
R2‑001179 Corrections to figures and procedures for the failure cases - -
R2‑001180 Corrections to Transport Channel and RB Reconfiguration procedures - -
R2‑001181 Corrections to INITIAL DIRECT TRANSFER and UE CAPABILITY INFORMATION CONFIRM procedures - -
R2‑001182 Correction to physical channel IEs in TDD - -
R2‑001183 NAS Routing - -
R2‑001184 - - -
R2‑001185 Replacement of duplicated information on ciphering description by references - -
R2‑001189 - - -
R2‑001190 - - -
R2‑001191 - - -
R2‑001192 - - -
R2‑001193 - - -
R2‑001194 - - -
R2‑001195 - - -
R2‑001196 RLC Logical Channel mapping - -
R2‑001197 - - -
R2‑001198 - - -
R2‑001199 - - -
R2‑001200 - - -
R2‑001201 - - -
R2‑001202 Transport format combination in TDD and Transport channel ID - -
R2‑001203 Signalling for dynamic TTI in TDD - -
R2‑001204 Usage of DCCH for Shared Channel Allocation message - -
R2‑001205 TDD preconfiguration for Handover to UTRAN - -
R2‑001206 Corrections on ASN.1 definitions - -
R2‑001207 - - -
R2‑001208 RLC Info - -
R2‑001209 Signalling procedure for periodic local authentication - -
R2‑001210 - - -
R2‑001211 - - -
R2‑001212 - - -
R2‑001213 Compressed mode parameters - -
R2‑001214 - - -
R2‑001215 - - -
R2‑001216 Downlink power control in compressed mode - -
R2‑001217 - - -
R2‑001218 - - -
R2‑001219 Corrections to Soft Handover messages and procedures R2 -
R2‑001220 Response to LS (R1-000611) on Transport Channel BLER R2 -
R2‑001221 Layer 1 LCS measurements - -
R2‑001222 Assisted GPS procedures - -
R2‑001223 - - -
R2‑001224 - - -
R2‑001225 BLER - -
R2‑001226 - - -
R2‑001227 Editorial modification on Physical CH IE - -
R2‑001228 - - -
R2‑001229 - - -
R2‑001230 - - -
R2‑001231 - - -
R2‑001232 - - -
R2‑001233 CPCH DL Power control - -
R2‑001234 - - -
R2‑001235 Clarification of RLC/MAC interaction - -
R2‑001237 Clarification of the RESET PDU - -
R2‑001238 Changes in PDCP PDU format due to PDCP sequence numbering - -
R2‑001239 General RLC corrections - -
R2‑001240 Updated Ad Hoc changes - -
R2‑001241 Stage 2 description for Handover to UTRAN - -
R2‑001242 - - -
R2‑001243 RLC value ranges - -
R2‑001244 Correction of EPC timer mechanism - -
R2‑001245 - - -
R2‑001246 - - -
R2‑001247 - - -
R2‑001248 - - -
R2‑001249 - - -
R2‑001250 - - -
R2‑001251 - - -
R2‑001252 Downloading of pre- defined configurations via SIB 16 - -
R2‑001253 ASN.1 definitions for RRC information between network nodes - -
R2‑001254 - - -
R2‑001255 UE capability corrections - -
R2‑001256 Clarification of compressed mode activation and configuration failure - -
R2‑001257 - - -
R2‑001258 - - -
R2‑001260 - - -
R2‑001261 CPCH corrections - -
R2‑001262 Clarification of prioritisation of logical channels in UE - -
R2‑001263 Modification of the RLC Size IE - -
R2‑001264 - - -
R2‑001265 - - -
R2‑001266 - - -
R2‑001267 - - -
R2‑001268 - - -
R2‑001269 - - -
R2‑001270 Clarification of prioritisation of logical channels in UE - -
R2‑001271 Modifications of Assisted GPS Messages - -
R2‑001272 Cell re-selection - -
R2‑001273 End of CPCH transmission - -
R2‑001274 Editorial corrections on security - -
R2‑001275 Clarification of HFN - -
R2‑001276 Clarification of Integrity Protection - -
R2‑001277 HFN Reset - -
R2‑001278 Clarification on ciphering parameters and integrity protection procedure in case of SRNS relocation - -
R2‑001279 - - -
R2‑001280 - - -
R2‑001281 Radio Bearer identity for CCCH - -
R2‑001282 SFN measurements in TDD - -
R2‑001283 - - -
R2‑001284 Response to LS (R1-000798) on'Neighbour Cell SFN detection for Handover' R2 -
R2‑001285 Changes to TR 25.926 UE radio access capabilities for TDD R2 -
R2‑001286 Security issues R2 -
R2‑001288 - - -
R2‑001289 Multiplicity values - -
R2‑001290 Paging and establishment cause values - -
R2‑001291 - - -

page generated from database: 2024-03-25 09:25:51

Get news. Get knowledge. Get involved
Get news.
Get knowledge.
Get involved.
Image
The 5G Standard
3GPP General Enquiries:
info@3gpp.org 


Connect:

Quick Links