The 5G Standard

3GPP Specification Change Requests

Go to spec numbering scheme page

Back to series index

Back to spec details

Go to current work plan


3GPP Specification Change Request records for: 25.214

CR no. rev cat Release CR written to vers new vers CR title TSG meeting TSG doc TSG status source WG meeting WG doc WG status cover date work item remarks database record created
0003 2 C R99 3.0.0 3.1.0 Flexible timing of UTRAN response to uplink closed loop Tx diversity feedback commands RP-06 RP-99686 approved R1 - R1‑99h89 agreed 1999‑12‑08 - -
0006 2 C R99 3.0.0 3.1.0 CPCH power control preamble length RP-06 RP-99686 approved R1 - R1‑99i09 agreed 1999‑12‑08 - -
0007 - C R99 3.0.0 3.1.0 Removal of open loop power control RP-06 RP-99686 approved R1 - R1‑99i63 agreed 1999‑12‑08 - -
0008 - B R99 3.0.0 3.1.0 Power offset of AICH and PICH RP-06 RP-99687 approved R1 - R1‑99i64 agreed 1999‑12‑08 - -
0009 1 C R99 3.0.0 3.1.0 Update of Random Access Procedure RP-06 RP-99686 approved R1 - R1‑99j37 agreed 1999‑12‑08 - -
0010 1 C R99 3.0.0 3.1.0 Soft symbol combining for uplink power control RP-06 RP-99686 approved R1 - R1‑99l22 agreed 1999‑12‑08 - -
0011 - D R99 3.0.0 3.1.0 Clarification of closed loop transmit diversity figure in section 8 and closed loop operation in compressed mode for mode 2 in section 8.3 of TS 25.214 RP-06 RP-99685 approved R1 - R1‑99i02 agreed 1999‑12‑08 - -
0012 - F R99 3.0.0 3.1.0 Uplink power control maximum TX power RP-06 RP-99686 approved R1 - R1‑99i66 agreed 1999‑12‑08 - -
0013 1 F R99 3.0.0 3.1.0 Setting of beta values for multi-code RP-06 RP-99686 approved R1 - R1‑99j91 agreed 1999‑12‑08 - -
0014 - C R99 3.0.0 3.1.0 Consolidation of CPCH Power Control Preamble Information RP-06 RP-99686 approved R1 - R1‑99i11 agreed 1999‑12‑08 - -
0015 1 C R99 3.0.0 3.1.0 Consolidation of Power Control Information for DCH Initialisation RP-06 RP-99686 approved R1 - R1‑99k51 agreed 1999‑12‑08 - -
0016 - F R99 3.0.0 3.1.0 Uplink power control in compressed mode RP-06 RP-99686 approved R1 - R1‑99i14 agreed 1999‑12‑08 - -
0018 1 C R99 3.0.0 3.1.0 Timing for initialisation procedures RP-06 RP-99686 approved R1 - R1‑99k52 agreed 1999‑12‑08 - -
0021 - B R99 3.0.0 3.1.0 20 ms RACH message length RP-06 RP-99687 approved R1 - R1‑99i40 agreed 1999‑12‑08 - -
0023 1 B R99 3.0.0 3.1.0 Maximum Tx power at uplink, compressed mode RP-06 RP-99684 approved R1 - R1‑99k69 agreed 1999‑12‑08 - -
0024 2 B R99 3.0.0 3.1.0 Setting of power in uplink compressed mode RP-06 RP-99687 approved R1 - R1‑99k78 agreed 1999‑12‑08 - -
0025 - B R99 3.0.0 3.1.0 Cleanup of synchronisation procedures RP-06 RP-99687 approved R1 - R1‑99j24 agreed 1999‑12‑08 - -
0026 2 F R99 3.0.0 3.1.0 Downlink power control RP-06 RP-99686 approved R1 - R1‑99l04 agreed 1999‑12‑08 - -
0029 - B R99 3.0.0 3.1.0 Out-of-synch handling RP-06 RP-99687 approved R1 - R1‑99j59 agreed 1999‑12‑08 - -
0030 2 B R99 3.0.0 3.1.0 State update rule addition to SSDT specification RP-06 RP-99687 approved R1 - R1‑99l70 agreed 1999‑12‑08 - -
0033 - B R99 3.0.0 3.1.0 Uplink TX timing adjustment RP-06 RP-99687 approved R1 - R1‑99j76 agreed 1999‑12‑08 - -
0036 - B R99 3.0.0 3.1.0 Inclusion of idle periods for the IPDL LCS RP-06 RP-99687 approved R1 - R1‑99k16 agreed 1999‑12‑08 - -
0041 - C R99 3.0.0 3.1.0 Revision of power control timing text RP-06 RP-99686 approved R1 - R1‑99j13 agreed 1999‑12‑08 - -
0042 1 B R99 3.0.0 3.1.0 Inclusion of adjustment loop in downlink power control RP-06 RP-99687 approved R1 - R1‑99l59 agreed 1999‑12‑08 - -
0043 1 F R99 3.1.1 3.2.0 Optimum ID Codes for SSDT Power Control RP-07 RP-000064 approved R1 R1-11 R1‑000233 agreed 2000‑03‑06 - -
0044 - D R99 3.1.1 3.2.0 Editorial clarification to section 5.1.2.2.2 RP-07 RP-000064 approved R1 R1-10 R1‑000016 agreed 2000‑02‑11 - -
0047 1 B R99 3.1.1 3.2.0 Additional description of TX diversity for PDSCH RP-07 RP-000064 approved R1 R1-10 R1‑000130 agreed 2000‑02‑11 - -
0048 - F R99 3.1.1 3.2.0 Power offset on S-CCPCH RP-07 RP-000064 approved R1 R1-10 R1‑000040 agreed 2000‑02‑11 - -
0050 2 F R99 3.1.1 3.2.0 Corrections to uplink power control RP-07 RP-000064 approved R1 R1-11 R1‑000314 agreed 2000‑03‑06 - -
0055 - F R99 3.1.1 3.2.0 Correction of Adjustment loop description RP-07 RP-000064 approved R1 R1-11 R1‑000089 agreed 2000‑03‑06 - -
0056 1 C R99 3.1.1 3.2.0 Clarification of TPC command combining for Algorithm 1 RP-07 RP-000064 approved R1 R1-11 R1‑000266 agreed 2000‑03‑06 - -
0057 - C R99 3.1.1 3.2.0 Clarification of TPC command combining for Algorithm 2 RP-07 RP-000064 approved R1 R1-11 R1‑000267 agreed 2000‑03‑06 - -
0059 2 F R99 3.1.1 3.2.0 CPCH: CD subslot-related additions to 6.2 RP-07 RP-000064 approved R1 R1-11 R1‑000431 agreed 2000‑03‑06 - -
0061 1 F R99 3.1.1 3.2.0 CPCH: editorial changes and clarifications of 6.2 RP-07 RP-000064 approved R1 R1-11 R1‑000412 agreed 2000‑03‑06 - -
0062 - F R99 3.1.1 3.2.0 Editorial corrections RP-07 RP-000064 approved R1 R1-11 R1‑000212 agreed 2000‑03‑06 - -
0064 1 D R99 3.1.1 3.2.0 Editorial improvement of the IPDL section RP-07 RP-000064 approved R1 R1-11 R1‑000353 agreed 2000‑03‑06 - -
0065 1 F R99 3.1.1 3.2.0 PRACH power offset definition RP-07 RP-000064 approved R1 R1-11 R1‑000344 agreed 2000‑03‑06 - -
0066 1 C R99 3.1.1 3.2.0 Radio link synchronisation in UTRA/FDD RP-07 RP-000064 approved R1 R1-11 R1‑000372 agreed 2000‑03‑06 - -
0068 - B R99 3.1.1 3.2.0 Definition for maximum and minimum DL power RP-07 RP-000064 approved R1 R1-11 R1‑000260 agreed 2000‑03‑06 - -
0069 4 B R99 3.1.1 3.2.0 Channel assignment and UE channel selection methods of CPCH RP-07 RP-000064 approved R1 R1-11 R1‑000430 agreed 2000‑03‑06 - -
0071 - C R99 3.1.1 3.2.0 Channelization code allocation method for PCPCH message part RP-07 RP-000064 approved R1 R1-11 R1‑000416 agreed 2000‑03‑06 - -
0072 1 B R99 3.1.1 3.2.0 Limited power raise used -parameter in DL PC RP-07 RP-000064 approved R1 R1-11 R1‑000442 agreed 2000‑03‑06 - -
0080 - D R99 3.1.1 3.2.0 Downlink power control RP-07 RP-000064 approved R1 R1-11 R1‑000319 agreed 2000‑03‑06 - -
0081 - D R99 3.1.1 3.2.0 Editorial improvement on SSDT power control section RP-07 RP-000064 approved R1 R1-11 R1‑000367 agreed 2000‑03‑06 - -
0082 2 B R99 3.1.1 3.2.0 Emergency Stop of CPCH transmission and Start of Message Indicator RP-07 RP-000065 approved R1 R1-11 R1‑000409 agreed 2000‑03‑06 - -
0083 - F R99 3.1.1 3.2.0 Clean up of USTS related specifications RP-07 RP-000065 approved R1 R1-11 R1‑000422 agreed 2000‑03‑06 - -
0084 - B R99 3.2.0 3.3.0 Addition of CSICH power parameter RP-08 RP-000268 approved R1 R1-12 R1‑000499 agreed 2000‑06‑07 - -
0085 - F R99 3.2.0 3.3.0 Correction to power control in compressed mode recovery period RP-08 RP-000268 approved R1 R1-12 R1‑000500 agreed 2000‑06‑07 - -
0086 1 F R99 3.2.0 3.3.0 Revisions to power control for CPCH RP-08 RP-000268 approved R1 R1-12 R1‑000566 agreed 2000‑06‑07 - -
0087 - F R99 3.2.0 3.3.0 Corrections to uplink DCH power control sections RP-08 RP-000268 approved R1 R1-12 R1‑000502 agreed 2000‑06‑07 - -
0090 3 C R99 3.2.0 3.3.0 Level of specification of downlink power control RP-08 RP-000268 approved R1 R1-13 R1‑000726 agreed 2000‑06‑07 - -
0091 1 F R99 3.2.0 3.3.0 Clarification of TX diversity power setting RP-08 RP-000268 approved R1 R1-12 R1‑000564 agreed 2000‑06‑07 - -
0092 - C R99 3.2.0 3.3.0 PICH undefined bits RP-08 RP-000268 approved R1 R1-12 R1‑000563 agreed 2000‑06‑07 - -
0095 1 F R99 3.2.0 3.3.0 DPDCH/DPCCH gain factors RP-08 RP-000268 approved R1 R1-13 R1‑000761 agreed 2000‑06‑07 - -
0096 3 F R99 3.2.0 3.3.0 Correction to RACH subchannel definition RP-08 RP-000268 approved R1 R1-13 R1‑000787 agreed 2000‑06‑07 - -
0097 1 F R99 3.2.0 3.3.0 The power setting of the CCC field of DL DPCCH for CPCH RP-08 RP-000268 approved R1 R1-12 R1‑000588 agreed 2000‑06‑07 - -
0098 4 B R99 3.2.0 3.3.0 Procedure for end of transmission indicator in CPCH RP-08 RP-000268 approved R1 R1-13 R1‑000799 agreed 2000‑06‑07 - -
0099 - C R99 3.2.0 3.3.0 Downlink inner-loop power control in compressed mode RP-08 RP-000268 approved R1 R1-12 R1‑000607 agreed 2000‑06‑07 - -
0100 - F R99 3.2.0 3.3.0 Definition of vector transmission weight entity RP-08 RP-000268 approved R1 R1-13 R1‑000617 agreed 2000‑06‑07 - -
0101 1 C R99 3.2.0 3.3.0 Number of slots for DPCCH power control preamble RP-08 RP-000268 approved R1 R1-13 R1‑000783 agreed 2000‑06‑07 - -
0102 - F R99 3.2.0 3.3.0 Clarification of UTRAN Tx diversity reponse timing description in 25.214 RP-08 RP-000268 approved R1 R1-13 R1‑000658 agreed 2000‑06‑07 - -
0103 2 F R99 3.2.0 3.3.0 Corrections to transmit diversity section RP-08 RP-000268 approved R1 R1-13 R1‑000742 agreed 2000‑06‑07 - -
0104 1 F R99 3.2.0 3.3.0 Corrections to uplink power control in compressed mode RP-08 RP-000268 approved R1 R1-13 R1‑000762 agreed 2000‑06‑07 - -
0105 - F R99 3.2.0 3.3.0 Clarification of downlink power control mode RP-08 RP-000268 approved R1 R1-13 R1‑000699 agreed 2000‑06‑07 - -
0106 - F R99 3.2.0 3.3.0 Clarification of radio link set RP-08 RP-000268 approved R1 R1-13 R1‑000700 agreed 2000‑06‑07 - -
0107 1 C R99 3.2.0 3.3.0 Clarification of radio link synchronisation procedure RP-08 RP-000268 approved R1 R1-13 R1‑000725 agreed 2000‑06‑07 - -
0108 - F R99 3.2.0 3.3.0 Correctly quantized gainfactors for uplink compressed mode RP-08 RP-000269 approved R1 R1-13 R1‑000718 agreed 2000‑06‑07 - -
0110 4 F R99 3.3.0 3.4.0 Downlink inner-loop power control in compressed mode RP-09 RP-000342 approved R1 R1-15 R1‑001144 agreed 2000‑09‑06 - -
0112 - F R99 3.3.0 3.4.0 Adding reference for power offset variation text in TS 25.214 RP-09 RP-000342 approved R1 R1-14 R1‑000888 agreed 2000‑07‑21 - -
0113 - F R99 3.3.0 3.4.0 Combining TPC commands in soft handover RP-09 RP-000342 approved R1 R1-14 R1‑000846 agreed 2000‑07‑21 - -
0115 1 F R99 3.3.0 3.4.0 Corrections to power control RP-09 RP-000342 approved R1 R1-14 R1‑000919 agreed 2000‑07‑21 - -
0116 - F R99 3.3.0 3.4.0 Corrections to 25.214 RP-09 RP-000342 approved R1 R1-14 R1‑000855 agreed 2000‑07‑21 - -
0117 - F R99 3.3.0 3.4.0 Clarification to downlink power control RP-09 RP-000342 approved R1 R1-14 R1‑000857 agreed 2000‑07‑21 - -
0118 3 F R99 3.3.0 3.4.0 Clarification of power control at maximum and minimum power RP-09 RP-000342 approved R1 R1-15 R1‑001103 agreed 2000‑09‑06 - -
0119 - F R99 3.3.0 3.4.0 Clarification of SSDT text RP-09 RP-000342 approved R1 R1-14 R1‑000860 agreed 2000‑07‑21 - -
0120 - F R99 3.3.0 3.4.0 Corrections to CL transmit diversity mode 1 RP-09 RP-000342 approved R1 R1-14 R1‑000947 agreed 2000‑07‑21 - -
0121 1 F R99 3.3.0 3.4.0 Clarification of SSDT ID code bit transmission order RP-09 RP-000342 approved R1 R1-15 R1‑001121 agreed 2000‑09‑06 - -
0122 1 F R99 3.3.0 3.4.0 Clarification on RACH and CPCH subchannel definition RP-09 RP-000342 approved R1 R1-15 R1‑001145 agreed 2000‑09‑06 - -
0123 1 F R99 3.3.0 3.4.0 DPCH initialisation procedure RP-09 RP-000342 approved R1 R1-15 R1‑001098 agreed 2000‑09‑06 - -
0124 - F R99 3.3.0 3.4.0 Clarification of closed loop mode TX diversity initialisation RP-09 RP-000342 approved R1 R1-15 R1‑001051 agreed 2000‑09‑06 - -
0127 2 F R99 3.3.0 3.4.0 Uplink power control in compressed mode RP-09 RP-000342 approved R1 R1-15 R1‑001159 agreed 2000‑09‑06 - -
0128 1 F R99 3.4.0 3.5.0 Clarification of downlink quality measurement in SSDT RP-10 RP‑000540 approved R1 R1-16 R1‑001226 agreed 2000‑10‑30 - -
0129 - F R99 3.4.0 3.5.0 Formula typography and reference corrections RP-10 RP‑000540 approved R1 R1-16 R1‑001183 agreed 2000‑10‑30 - -
0130 1 F R99 3.4.0 3.5.0 Radio link establishment and sync status reporting RP-10 RP‑000540 approved R1 R1-16 R1‑001274 agreed 2000‑10‑30 - -
0133 - F R99 3.4.0 3.5.0 Correction of RACH/CPCH physical random access procedure RP-10 RP‑000540 approved R1 R1-16 R1‑001213 agreed 2000‑10‑30 - -
0134 - F R99 3.4.0 3.5.0 Correction of uplink power control algorithm 2 RP-10 RP‑000540 approved R1 R1-16 R1‑001214 agreed 2000‑10‑30 - -
0135 1 F R99 3.4.0 3.5.0 TPC command generation on downlink during RLS initialisation RP-10 RP‑000540 approved R1 R1-17 R1‑001463 agreed 2000‑11‑24 - -
0136 1 F R99 3.4.0 3.5.0 Clarification of RACH behaviour at maximum and minimum power RP-10 RP‑000540 approved R1 R1-16 R1‑001273 agreed 2000‑10‑30 - -
0137 - F R99 3.4.0 3.5.0 Clarifications on the description of the radio link establishment procedure (when no radio link exists) RP-10 RP‑000540 approved R1 R1-17 R1‑001333 agreed 2000‑11‑24 - -
0138 1 F R99 3.4.0 3.5.0 Corrections on power control preambles RP-10 RP‑000540 approved R1 R1-17 R1‑001437 agreed 2000‑11‑24 - -
0139 1 F R99 3.4.0 3.5.0 Clarification of RACH procedure RP-10 RP‑000540 approved R1 R1-17 R1‑001438 agreed 2000‑11‑24 - -
0140 - F R99 3.4.0 3.5.0 Uplink power control in compressed mode RP-10 RP‑000540 approved R1 R1-17 R1‑001400 agreed 2000‑11‑24 - -
0141 1 F R99 3.4.0 3.5.0 Revision of the abbreviation list RP-10 RP‑000540 approved R1 R1-17 R1‑001420 agreed 2000‑11‑24 - -
0142 1 F R99 3.5.0 3.6.0 Uplink power control in compressed mode RP-11 RP‑010060 approved R1 R1-18 R1‑010112 agreed 2001‑02‑08 - 0
0144 - F R99 3.5.0 3.6.0 Removal of the power balancing algorithm from TS 25.214 RP-11 RP‑010060 approved R1 R1-18 R1‑010052 agreed 2001‑02‑08 - 0
0145 - F R99 3.5.0 - Clarification of Nid parameter – when SSDT and uplink compressed mode are in operation RP-11 RP‑010060 revised R1 R1-18 R1‑010053 agreed 2001‑02‑08 - 0
0145 1 F R99 3.5.0 3.6.0 Clarification of Nid parameter – when SSDT and uplink compressed mode are in operation RP-11 RP‑010218 approved Nokia R1-18 R1‑010053r - 2001‑03‑14 - 0
0145 1 F R99 3.5.0 3.6.0 Clarification of Nid parameter – when SSDT and uplink compressed mode are in operation RP-11 RP‑010254 approved Nokia - - 2001‑02‑08 - 0
0146 - F R99 3.5.0 3.6.0 Clarification of closed loop transmit diversity mode 1 and mode 2 operation during compressed mode RP-11 RP‑010060 approved R1 R1-18 R1‑010085 agreed 2001‑02‑08 - 0
0148 1 F R99 3.5.0 3.6.0 Clarification of UE SIR estimation RP-11 RP‑010060 approved R1 R1-19 R1‑010352 agreed 2001‑03‑01 - 0
0149 1 B Rel-4 3.5.0 4.0.0 DSCH Power Control Improvement in soft handover RP-11 RP‑010074 approved R1 R1-19 R1‑010414 agreed 2001‑03‑03 RInImp-DSCHsho 0
0150 1 F R99 3.5.0 3.6.0 Clarification of the order of SSDT signalling in 2 bit FBI RP-11 RP‑010060 approved R1 R1-19 R1‑010357 agreed 2001‑03‑01 - 0
0154 1 F R99 3.5.0 - Uplink power control preamble RP-11 RP‑010060 revised R1 R1-19 R1‑010359 agreed 2001‑03‑03 - 0
0154 2 F R99 3.5.0 3.6.0 Uplink power control preamble RP-11 RP‑010224 approved ??? R1-19 R1‑010359 - 2001‑03‑14 - 0
0155 - F R99 3.5.0 3.6.0 Correction of limited power raise RP-11 RP‑010060 approved R1 R1-19 R1‑010279 agreed 2001‑02‑28 - 0
0156 - F R99 3.5.0 3.6.0 Clarification of initialisation procedure RP-11 RP‑010060 approved R1 R1-19 R1‑010282 agreed 2001‑02‑28 - 0
0158 - F R99 3.5.0 3.6.0 Definition of power control step size for algorithm 2 RP-11 RP‑010060 approved R1 R1-19 R1‑010285 agreed 2001‑02‑28 - 0
0161 1 F R99 3.5.0 3.6.0 Correction of the UE behaviour in SSDT mode RP-11 RP‑010060 approved R1 R1-19 R1‑010353 agreed 2001‑03‑03 - 0
0163 - F R99 3.5.0 3.6.0 Correction on downlink synchronisation primitives RP-11 RP‑010060 approved R1 R1-19 R1‑010419 agreed 2001‑03‑03 - 0
0164 1 F Rel-4 4.0.0 4.1.0 Clarification on the usage of SSDT signaling in uplink RP-12 RP‑010341 approved R1 R1-20 R1‑01‑0632 agreed 2001‑05‑29 URInImp-DSCHsho -
0165 1 D R99 3.6.0 3.7.0 Limited power raise: aligning of terminology with TS25.433 RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0554 agreed 2001‑05‑29 TEI -
0166 1 A Rel-4 4.0.0 4.1.0 Limited power raise: aligning of terminology with TS25.433 RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0554 agreed 2001‑05‑29 TEI -
0167 1 A Rel-4 4.0.0 4.1.0 Correction of IPDL burst parameters RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0617 agreed 2001‑05‑29 TEI -
0168 1 F R99 3.6.0 3.7.0 Correction of synchronisation primitives RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0614 agreed 2001‑05‑29 TEI -
0169 1 A Rel-4 4.0.0 4.1.0 Correction of synchronisation primitives RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0614 agreed 2001‑05‑29 TEI -
0176 1 F R99 3.6.0 3.7.0 Clarification on TPC command generation on downlink during RL initialisation RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0615 agreed 2001‑05‑29 TEI -
0177 1 A Rel-4 4.0.0 4.1.0 Clarification on TPC command generation on downlink during RL initialisation RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0615 agreed 2001‑05‑29 TEI -
0180 2 F R99 3.6.0 - Clarification of synchronisation procedures RP-12 RP‑010334 revised R1 R1-20 R1‑01‑0666 agreed 2001‑05‑29 TEI Revised in RP-010441
0180 3 F R99 3.6.0 - Clarification of synchronisation procedures RP-12 RP‑010441 revised - - - 2001‑05‑29 TEI Revised in RP-010482
0180 4 F R99 3.6.0 - Clarification of synchronisation procedures RP-12 RP‑010482 approved - - - 2001‑05‑29 TEI -
0181 2 A Rel-4 4.0.0 - Clarification of synchronisation procedures RP-12 RP‑010334 revised R1 R1-20 R1‑01‑0666 agreed 2001‑05‑29 TEI Revised in RP-010441
0181 3 A Rel-4 4.0.0 - Clarification of synchronisation procedures RP-12 RP‑010441 revised - - - 2001‑05‑29 TEI Revised in RP-010482
0181 4 A Rel-4 4.0.0 - Clarification of synchronisation procedures RP-12 RP‑010482 approved - - - 2001‑05‑29 TEI -
0182 - F R99 3.6.0 3.7.0 Clarification of initialisation of closed loop mode 1 and 2 during compressed mode RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0517 agreed 2001‑05‑28 TEI -
0183 - A Rel-4 4.0.0 4.1.0 Clarification of initialisation of closed loop mode 1 and 2 during compressed mode RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0517 agreed 2001‑05‑29 TEI -
0184 1 F R99 3.6.0 3.7.0 Correction of IPDL burst parameters RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0617 agreed 2001‑05‑29 TEI -
0185 - F R99 3.6.0 3.7.0 DL maximum power level in compressed mode RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0658 agreed 2001‑05‑29 TEI -
0186 - A Rel-4 4.0.0 4.1.0 DL maximum power level in compressed mode RP-12 RP‑010334 approved R1 R1-20 R1‑01‑0658 agreed 2001‑05‑29 TEI -
0191 - F R99 3.7.0 3.8.0 Corrections and Clarifications for calculation of idle period position in subclause 8.3 in 25.214 RP-13 RP‑010520 approved R1 R1-21 R1‑010814 agreed 2001‑09‑08 TEI -
0192 - A Rel-4 4.1.0 4.2.0 Corrections and Clarifications for calculation of idle period position in subclause 8.3 in 25.214 RP-13 RP‑010520 approved R1 R1-21 R1‑010814 agreed 2001‑09‑08 TEI -
0193 1 F R99 3.7.0 3.8.0 Minor modifications to the CPCH access procedure RP-13 RP‑010520 approved R1 R1-21 R1‑010931 agreed 2001‑09‑08 TEI -
0194 1 A Rel-4 4.1.0 4.2.0 Minor modifications to the CPCH access procedure RP-13 RP‑010520 approved R1 R1-21 R1‑010931 agreed 2001‑09‑08 TEI -
0195 1 F Rel-4 4.1.0 4.2.0 Enhanced PDSCH power control clarification RP-13 RP‑010527 approved R1 R1-21 R1‑010904 agreed 2001‑09‑08 RInImp-DSCHsho -
0196 - F R99 3.7.0 3.8.0 Downlink power control in compressed mode RP-13 RP‑010520 approved R1 R1-21 R1‑010836 agreed 2001‑09‑08 TEI -
0197 - A Rel-4 4.1.0 4.2.0 Downlink power control in compressed mode RP-13 RP‑010520 approved R1 R1-21 R1‑010836 agreed 2001‑09‑08 TEI -
0198 1 F R99 3.7.0 3.8.0 Improvements of closed loop TX diversity description RP-13 RP‑010520 approved R1 R1-21 R1‑010927 agreed 2001‑09‑08 TEI -
0199 1 A Rel-4 4.1.0 4.2.0 Improvements of closed loop TX diversity description RP-13 RP‑010520 approved R1 R1-21 R1‑010927 agreed 2001‑09‑08 TEI -
0200 1 F R99 3.7.0 3.8.0 Correction to Random access procedure (Primitive from MAC) RP-13 RP‑010520 approved R1 R1-21 R1‑010926 agreed 2001‑09‑08 TEI -
0201 1 A Rel-4 4.1.0 4.2.0 Correction to Random access procedure (Primitive from MAC) RP-13 RP‑010520 approved R1 R1-21 R1‑010926 agreed 2001‑09‑08 TEI -
0204 1 F R99 3.7.0 - Proposed to TS25.214: Clarification of the SSDT behaviour with beam forming RP-13 RP‑010677 revised Panasonic - - 2001‑09‑19 - Not seen by WG
0204 2 F R99 3.7.0 - Proposed to TS25.214: Clarification of the SSDT behaviour with beam forming RP-13 RP‑010710 withdrawn Panasonic - - 2001‑09‑19 - Not seen by WG
0205 1 A Rel-4 4.1.0 - Proposed to TS25.214: Clarification of the SSDT behaviour with beam forming RP-13 RP‑010677 revised Panasonic - - 2001‑09‑19 - Not seen by WG
0205 2 A Rel-4 4.1.0 - Proposed to TS25.214: Clarification of the SSDT behaviour with beam forming RP-13 RP‑010710 withdrawn Panasonic - - 2001‑09‑19 - Not seen by WG
0206 1 F R99 3.8.0 3.9.0 Power control in compressed mode when DPC_MODE=1 RP-14 RP‑010739 approved R1 R1-22 R1‑01‑1125 agreed 2001‑11‑23 TEI -
0207 1 A Rel-4 4.2.0 4.3.0 Power control in compressed mode when DPC_MODE=1 RP-14 RP‑010739 approved R1 R1-22 R1‑01‑1125 agreed 2001‑11‑23 TEI -
0208 - F R99 3.8.0 3.9.0 Clarification of closed loop mode 1 and 2 Tx diversity operation during compressed mode RP-14 RP‑010739 approved R1 R1-22 R1‑01‑0993 agreed 2001‑11‑19 TEI -
0209 - A Rel-4 4.2.0 4.3.0 Clarification of closed loop mode 1 and 2 Tx diversity operation during compressed mode RP-14 RP‑010739 approved R1 R1-22 R1‑01‑0993 agreed 2001‑11‑19 TEI -
0210 - F R99 3.8.0 3.9.0 Downlink phase reference reconfiguration RP-14 RP‑010739 approved R1 R1-22 R1‑01‑1122 agreed 2001‑11‑19 TEI -
0211 - A Rel-4 4.2.0 4.3.0 Downlink phase reference reconfiguration RP-14 RP‑010739 approved R1 R1-22 R1‑01‑1122 agreed 2001‑11‑19 TEI -
0215 1 F R99 3.8.0 3.9.0 Uplink TPC Command Processing in SHO with SSDT RP-14 RP‑010775 approved R1 R1-22 R1‑01‑1250 agreed 2001‑11‑21 TEI -
0216 - A Rel-4 4.2.0 4.3.0 Uplink TPC Command Processing in SHO with SSDT RP-14 RP‑010775 approved R1 R1-22 R1‑01‑1250 agreed 2001‑11‑21 TEI -
0217 2 F Rel-4 4.2.0 4.3.0 DSCH power control clarification RP-14 RP‑010744 approved R1 R1-22 R1‑01‑1304 agreed 2001‑11‑23 RInImp-DSCHsho -
0218 1 F R99 3.8.0 3.9.0 Downlink power control for channels supporting CPCH RP-14 RP‑010739 approved R1 R1-22 R1‑01‑1251 agreed 2001‑11‑21 TEI -
0219 1 A Rel-4 4.2.0 4.3.0 Downlink power control for channels supporting CPCH RP-14 RP‑010739 approved R1 R1-22 R1‑01‑1251 agreed 2001‑11‑21 TEI -
0222 - F R99 3.8.0 3.9.0 Removal of Slow Power Control from TS 25.214 RP-14 RP‑010739 approved R1 R1-22 R1‑01‑1245 agreed 2001‑11‑21 TEI -
0223 - A Rel-4 4.2.0 4.3.0 Removal of Slow Power Control from TS 25.214 RP-14 RP‑010739 approved R1 R1-22 R1‑01‑1245 agreed 2001‑11‑21 TEI -
0226 - F R99 3.9.0 3.10.0 Clarification on DPCCH dedicated pilot bits with closed loop mode 1 RP-15 RP‑020047 approved R1 R1-24 R1‑020305 agreed 2002‑02‑22 TEI -
0227 - A Rel-4 4.3.0 4.4.0 Clarification on DPCCH dedicated pilot bits with closed loop mode 1 RP-15 RP‑020047 approved R1 R1-24 R1‑020305 agreed 2002‑02‑22 TEI -
0228 - F R99 3.8.0 3.9.0 Restriction to SSDT and closed loop mode transmit diversity combination RP-14 RP‑010933 approved Nokia, Panasonic - - 2001‑12‑12 TEI -
0229 - A Rel-4 4.2.0 4.3.0 Restriction to SSDT and closed loop mode transmit diversity combination RP-14 RP‑010933 approved Nokia, Panasonic - - 2001‑12‑12 TEI -
0230 1 F R99 3.9.0 - Qth threshold parameter in SSDT RP-15 RP‑020047 revised R1 R1-24 R1‑020487 agreed 2002‑02‑23 TEI -
0230 2 F R99 3.9.0 - Qth threshold parameter in SSDT RP-15 RP‑020236 revised R1 - - 2002‑02‑23 TEI -
0230 3 F R99 3.9.0 3.10.0 Qth threshold parameter in SSDT RP-15 RP‑020261 approved R1 - - 2002‑02‑23 TEI -
0231 1 A Rel-4 4.3.0 - Qth threshold parameter in SSDT RP-15 RP‑020047 revised R1 R1-24 R1‑020487 agreed 2002‑02‑23 TEI -
0231 2 A Rel-4 4.3.0 - Qth threshold parameter in SSDT RP-15 RP‑020236 revised R1 - - 2002‑02‑23 TEI -
0231 3 A Rel-4 4.3.0 4.4.0 Qth threshold parameter in SSDT RP-15 RP‑020261 approved R1 - - 2002‑02‑23 TEI -
0234 1 C Rel-5 4.3.0 - Definition of Qth threshold parameter in SSDT RP-15 RP‑020056 postponed R1 R1-24 R1‑020500 agreed 2002‑02‑23 RANimp-SSDT -
0236 1 F Rel-4 4.3.0 4.4.0 Clarification of closed loop transmit diversity during soft handover RP-15 RP‑020053 approved R1 R1-24 R1‑020489 agreed 2002‑02‑23 TEI4 -
0237 2 B Rel-5 4.3.0 5.0.0 Introduction of HSDPA feature to TS25.214 RP-15 RP‑020058 approved R1 R1-24 R1‑020480 agreed 2002‑02‑23 HSDPA-Phys -
0239 1 F R99 3.9.0 3.10.0 TPC procedure in UE when SSDT is activated RP-15 RP‑020047 approved R1 R1-24 R1‑020488 agreed 2002‑02‑23 TEI -
0240 1 A Rel-4 4.3.0 4.4.0 TPC procedure in UE when SSDT is activated RP-15 RP‑020047 approved R1 R1-24 R1‑020488 agreed 2002‑02‑23 TEI -
0250 1 B Rel-5 4.3.0 5.0.0 Description of SSDT operation for TFCI power control in hard split mode RP-15 RP‑020054 approved R1 R1-24 R1‑020513 agreed 2002‑02‑23 RInImp-DSCHhsp -
0251 - B Rel-5 4.3.0 5.0.0 Introduction of power control aspects for HSDPA feature in TS25.214 RP-15 RP‑020058 approved R1 R1-24 R1‑020404 agreed 2002‑02‑23 HSDPA-Phys -
0255 2 F Rel-5 5.0.0 5.1.0 Correction on the operation of HSDPA during compressed mode RP-16 RP‑020316 approved R1 R1-26 R1‑020769 agreed 2002‑05‑14 HSDPA-Phys -
0259 1 F Rel-5 5.0.0 5.1.0 Clarification of UE transmission timing adjustment with HS-DPCCH RP-16 RP‑020316 approved R1 R1-26 R1‑020813 agreed 2002‑05‑23 HSDPA-Phys -
0260 4 F Rel-5 5.0.0 5.1.0 Definition of CQI reporting RP-16 RP‑020316 approved R1 R1-26 R1‑020748 agreed 2002‑05‑23 HSDPA-Phys -
0263 - F Rel-5 5.1.0 5.2.0 Clarification of total HS-SCCH/HS-PDSCH power RP-17 RP‑020584 approved R1 R1-28 R1‑02‑0898 agreed 2002‑08‑20 HSDPA-Phys -
0265 1 C Rel-5 5.0.0 5.1.0 Definition of Qth threshold parameter in SSDT RP-16 RP‑020318 approved R1 R1-26 R1‑020778 agreed 2002‑05‑23 RANimp-SSDT -
0266 - F Rel-5 5.0.0 5.1.0 Correction to the setting of DPCCH/HS-DPCCH power difference RP-16 RP‑020316 approved R1 R1-26 R1‑020801 agreed 2002‑05‑14 HSDPA-Phys -
0267 - F Rel-5 5.0.0 5.1.0 Inclusion of CQI table RP-16 RP‑020316 approved R1 R1-26 R1‑020743 agreed 2002‑05‑14 HSDPA-Phys -
0270 1 F R99 3.10.0 3.11.0 Reversal of unwanted corrections resulting from 25.211-122 & CR 25.214-226 RP-17 RP‑020571 approved R1 R1-28 R1‑02‑1097 agreed 2002‑08‑20 TEI -
0271 - A Rel-4 4.4.0 4.5.0 Reversal of unwanted corrections resulting from 25.211-122 & CR 25.214-226 RP-17 RP‑020571 approved R1 R1-28 R1‑02‑1097 agreed 2002‑08‑20 TEI -
0272 - A Rel-5 5.1.0 5.2.0 Reversal of unwanted corrections resulting from 25.211-122 & CR 25.214-226 RP-17 RP‑020571 approved R1 R1-28 R1‑02‑1097 agreed 2002‑08‑20 TEI -
0273 2 F Rel-5 5.1.0 5.2.0 Clarification of total HS-PDSCH power in CQI reporting procedure RP-17 RP‑020584 approved R1 R1-28 R1‑021194 agreed 2002‑08‑20 HSDPA-Phys -
0274 1 F Rel-5 5.1.0 5.2.0 Closed loop transmit diversity mode 2 with antenna verification RP-17 RP‑020584 approved R1 R1-28 R1‑02‑1092 agreed 2002‑08‑21 TEI5 -
0277 - F R99 3.10.0 3.11.0 Correction of maximum power adjustment in case of compressed mode RP-17 RP‑020589 approved R1 R1-28 R1‑02‑0994 agreed 2002‑08‑20 TEI -
0278 - A Rel-4 4.4.0 4.5.0 Correction of maximum power adjustment in case of compressed mode RP-17 RP‑020589 approved R1 R1-28 R1‑02‑0994 agreed 2002‑08‑20 TEI -
0279 - A Rel-5 5.1.0 5.2.0 Correction of maximum power adjustment in case of compressed mode RP-17 RP‑020589 approved R1 R1-28 R1‑02‑0994 agreed 2002‑08‑20 TEI -
0281 1 F Rel-4 4.4.0 4.5.0 Enhanced DSCH power control parameter name change RP-17 RP‑020574 approved R1 R1-28 R1‑02‑1128 agreed 2002‑08‑21 RInImp-DSCHsho -
0282 1 A Rel-5 5.1.0 5.2.0 Enhanced DSCH power control parameter name change RP-17 RP‑020574 approved R1 R1-28 R1‑02‑1128 agreed 2002‑08‑21 RInImp-DSCHsho -
0286 1 D Rel-5 5.1.0 5.2.0 Numbering corrections RP-17 RP‑020584 approved R1 R1-28 R1‑02‑1145 agreed 2002‑08‑26 TEI5 -
0287 2 F Rel-5 5.1.0 5.2.0 Correction of CQI definition RP-17 RP‑020584 approved R1 R1-28 R1‑02‑1187 agreed 2002‑08‑26 HSDPA-Phys -
0288 - F Rel-5 5.1.0 5.2.0 Inclusion of closed loop transmit diversity for HSDPA RP-17 RP‑020587 approved R1 R1-28 R1‑02‑1078 agreed 2002‑08‑21 HSDPA-Phys -
0289 - F Rel-5 5.1.0 5.2.0 Correction of timing of CQI reporting RP-17 RP‑020588 approved R1 R1-28 R1‑02‑1086 agreed 2002‑08‑26 HSDPA-Phys -
0292 - F R99 3.10.0 3.11.0 Correction of reference linked to approval of 25.133-469r1 RP-17 RP‑020529 approved R1 R1-28 R1‑02‑1158 agreed 2002‑08‑26 TEI -
0293 - A Rel-4 4.4.0 4.5.0 Correction of reference linked to approval of 25.133-470 RP-17 RP‑020529 approved R1 R1-28 R1‑02‑1158 agreed 2002‑08‑26 TEI -
0294 - A Rel-5 5.1.0 5.2.0 Correction of reference linked to approval of 25.133-471 RP-17 RP‑020529 approved R1 R1-28 R1‑02‑1158 agreed 2002‑08‑26 TEI -
0296 - F Rel-5 5.1.0 5.2.0 The clarification of CQI feedback parameter k value RP-17 RP‑020584 approved R1 R1-28 R1‑02‑1172 agreed 2002‑08‑26 HSDPA-Phys -
0298 - F Rel-5 5.1.0 5.2.0 Clarification of CQI definition and reference period RP-17 RP‑020584 approved R1 R1-28 R1‑02‑1193 agreed 2002‑08‑26 HSDPA-Phys -

page generated from database: 2024-04-13 13:51:47